Module ctrl

Source
Expand description

Control register for all counters

Structs§

CTRL_SPEC
Control register for all counters

Type Aliases§

CLK_EN_R
Field CLK_EN reader - The registers clock gate enable signal of PCNT module. 1: the registers can be read and written by application. 0: the registers can not be read or written by application
CLK_EN_W
Field CLK_EN writer - The registers clock gate enable signal of PCNT module. 1: the registers can be read and written by application. 0: the registers can not be read or written by application
CNT_PAUSE_U0_R
Field CNT_PAUSE_U0 reader - Set this bit to freeze unit 0’s counter.
CNT_PAUSE_U0_W
Field CNT_PAUSE_U0 writer - Set this bit to freeze unit 0’s counter.
CNT_PAUSE_U1_R
Field CNT_PAUSE_U1 reader - Set this bit to freeze unit 1’s counter.
CNT_PAUSE_U1_W
Field CNT_PAUSE_U1 writer - Set this bit to freeze unit 1’s counter.
CNT_PAUSE_U2_R
Field CNT_PAUSE_U2 reader - Set this bit to freeze unit 2’s counter.
CNT_PAUSE_U2_W
Field CNT_PAUSE_U2 writer - Set this bit to freeze unit 2’s counter.
CNT_PAUSE_U3_R
Field CNT_PAUSE_U3 reader - Set this bit to freeze unit 3’s counter.
CNT_PAUSE_U3_W
Field CNT_PAUSE_U3 writer - Set this bit to freeze unit 3’s counter.
DALTA_CHANGE_EN_U0_R
Field DALTA_CHANGE_EN_U0 reader - Configures this bit to enable unit 0’s step comparator.
DALTA_CHANGE_EN_U0_W
Field DALTA_CHANGE_EN_U0 writer - Configures this bit to enable unit 0’s step comparator.
DALTA_CHANGE_EN_U1_R
Field DALTA_CHANGE_EN_U1 reader - Configures this bit to enable unit 1’s step comparator.
DALTA_CHANGE_EN_U1_W
Field DALTA_CHANGE_EN_U1 writer - Configures this bit to enable unit 1’s step comparator.
DALTA_CHANGE_EN_U2_R
Field DALTA_CHANGE_EN_U2 reader - Configures this bit to enable unit 2’s step comparator.
DALTA_CHANGE_EN_U2_W
Field DALTA_CHANGE_EN_U2 writer - Configures this bit to enable unit 2’s step comparator.
DALTA_CHANGE_EN_U3_R
Field DALTA_CHANGE_EN_U3 reader - Configures this bit to enable unit 3’s step comparator.
DALTA_CHANGE_EN_U3_W
Field DALTA_CHANGE_EN_U3 writer - Configures this bit to enable unit 3’s step comparator.
PULSE_CNT_RST_U0_R
Field PULSE_CNT_RST_U0 reader - Set this bit to clear unit 0’s counter.
PULSE_CNT_RST_U0_W
Field PULSE_CNT_RST_U0 writer - Set this bit to clear unit 0’s counter.
PULSE_CNT_RST_U1_R
Field PULSE_CNT_RST_U1 reader - Set this bit to clear unit 1’s counter.
PULSE_CNT_RST_U1_W
Field PULSE_CNT_RST_U1 writer - Set this bit to clear unit 1’s counter.
PULSE_CNT_RST_U2_R
Field PULSE_CNT_RST_U2 reader - Set this bit to clear unit 2’s counter.
PULSE_CNT_RST_U2_W
Field PULSE_CNT_RST_U2 writer - Set this bit to clear unit 2’s counter.
PULSE_CNT_RST_U3_R
Field PULSE_CNT_RST_U3 reader - Set this bit to clear unit 3’s counter.
PULSE_CNT_RST_U3_W
Field PULSE_CNT_RST_U3 writer - Set this bit to clear unit 3’s counter.
R
Register CTRL reader
W
Register CTRL writer