#[doc = "Register `INT_ENA` reader"]
pub type R = crate::R<INT_ENA_SPEC>;
#[doc = "Register `INT_ENA` writer"]
pub type W = crate::W<INT_ENA_SPEC>;
#[doc = "Field `TIMER0_STOP_INT_ENA` reader - The enable bit for the interrupt triggered when the timer 0 stops."]
pub type TIMER0_STOP_INT_ENA_R = crate::BitReader;
#[doc = "Field `TIMER0_STOP_INT_ENA` writer - The enable bit for the interrupt triggered when the timer 0 stops."]
pub type TIMER0_STOP_INT_ENA_W<'a, REG, const O: u8> = crate::BitWriter<'a, REG, O>;
#[doc = "Field `TIMER1_STOP_INT_ENA` reader - The enable bit for the interrupt triggered when the timer 1 stops."]
pub type TIMER1_STOP_INT_ENA_R = crate::BitReader;
#[doc = "Field `TIMER1_STOP_INT_ENA` writer - The enable bit for the interrupt triggered when the timer 1 stops."]
pub type TIMER1_STOP_INT_ENA_W<'a, REG, const O: u8> = crate::BitWriter<'a, REG, O>;
#[doc = "Field `TIMER2_STOP_INT_ENA` reader - The enable bit for the interrupt triggered when the timer 2 stops."]
pub type TIMER2_STOP_INT_ENA_R = crate::BitReader;
#[doc = "Field `TIMER2_STOP_INT_ENA` writer - The enable bit for the interrupt triggered when the timer 2 stops."]
pub type TIMER2_STOP_INT_ENA_W<'a, REG, const O: u8> = crate::BitWriter<'a, REG, O>;
#[doc = "Field `TIMER0_TEZ_INT_ENA` reader - The enable bit for the interrupt triggered by a PWM timer 0 TEZ event."]
pub type TIMER0_TEZ_INT_ENA_R = crate::BitReader;
#[doc = "Field `TIMER0_TEZ_INT_ENA` writer - The enable bit for the interrupt triggered by a PWM timer 0 TEZ event."]
pub type TIMER0_TEZ_INT_ENA_W<'a, REG, const O: u8> = crate::BitWriter<'a, REG, O>;
#[doc = "Field `TIMER1_TEZ_INT_ENA` reader - The enable bit for the interrupt triggered by a PWM timer 1 TEZ event."]
pub type TIMER1_TEZ_INT_ENA_R = crate::BitReader;
#[doc = "Field `TIMER1_TEZ_INT_ENA` writer - The enable bit for the interrupt triggered by a PWM timer 1 TEZ event."]
pub type TIMER1_TEZ_INT_ENA_W<'a, REG, const O: u8> = crate::BitWriter<'a, REG, O>;
#[doc = "Field `TIMER2_TEZ_INT_ENA` reader - The enable bit for the interrupt triggered by a PWM timer 2 TEZ event."]
pub type TIMER2_TEZ_INT_ENA_R = crate::BitReader;
#[doc = "Field `TIMER2_TEZ_INT_ENA` writer - The enable bit for the interrupt triggered by a PWM timer 2 TEZ event."]
pub type TIMER2_TEZ_INT_ENA_W<'a, REG, const O: u8> = crate::BitWriter<'a, REG, O>;
#[doc = "Field `TIMER0_TEP_INT_ENA` reader - The enable bit for the interrupt triggered by a PWM timer 0 TEP event."]
pub type TIMER0_TEP_INT_ENA_R = crate::BitReader;
#[doc = "Field `TIMER0_TEP_INT_ENA` writer - The enable bit for the interrupt triggered by a PWM timer 0 TEP event."]
pub type TIMER0_TEP_INT_ENA_W<'a, REG, const O: u8> = crate::BitWriter<'a, REG, O>;
#[doc = "Field `TIMER1_TEP_INT_ENA` reader - The enable bit for the interrupt triggered by a PWM timer 1 TEP event."]
pub type TIMER1_TEP_INT_ENA_R = crate::BitReader;
#[doc = "Field `TIMER1_TEP_INT_ENA` writer - The enable bit for the interrupt triggered by a PWM timer 1 TEP event."]
pub type TIMER1_TEP_INT_ENA_W<'a, REG, const O: u8> = crate::BitWriter<'a, REG, O>;
#[doc = "Field `TIMER2_TEP_INT_ENA` reader - The enable bit for the interrupt triggered by a PWM timer 2 TEP event."]
pub type TIMER2_TEP_INT_ENA_R = crate::BitReader;
#[doc = "Field `TIMER2_TEP_INT_ENA` writer - The enable bit for the interrupt triggered by a PWM timer 2 TEP event."]
pub type TIMER2_TEP_INT_ENA_W<'a, REG, const O: u8> = crate::BitWriter<'a, REG, O>;
#[doc = "Field `FAULT0_INT_ENA` reader - The enable bit for the interrupt triggered when event_f0 starts."]
pub type FAULT0_INT_ENA_R = crate::BitReader;
#[doc = "Field `FAULT0_INT_ENA` writer - The enable bit for the interrupt triggered when event_f0 starts."]
pub type FAULT0_INT_ENA_W<'a, REG, const O: u8> = crate::BitWriter<'a, REG, O>;
#[doc = "Field `FAULT1_INT_ENA` reader - The enable bit for the interrupt triggered when event_f1 starts."]
pub type FAULT1_INT_ENA_R = crate::BitReader;
#[doc = "Field `FAULT1_INT_ENA` writer - The enable bit for the interrupt triggered when event_f1 starts."]
pub type FAULT1_INT_ENA_W<'a, REG, const O: u8> = crate::BitWriter<'a, REG, O>;
#[doc = "Field `FAULT2_INT_ENA` reader - The enable bit for the interrupt triggered when event_f2 starts."]
pub type FAULT2_INT_ENA_R = crate::BitReader;
#[doc = "Field `FAULT2_INT_ENA` writer - The enable bit for the interrupt triggered when event_f2 starts."]
pub type FAULT2_INT_ENA_W<'a, REG, const O: u8> = crate::BitWriter<'a, REG, O>;
#[doc = "Field `FAULT0_CLR_INT_ENA` reader - The enable bit for the interrupt triggered when event_f0 ends."]
pub type FAULT0_CLR_INT_ENA_R = crate::BitReader;
#[doc = "Field `FAULT0_CLR_INT_ENA` writer - The enable bit for the interrupt triggered when event_f0 ends."]
pub type FAULT0_CLR_INT_ENA_W<'a, REG, const O: u8> = crate::BitWriter<'a, REG, O>;
#[doc = "Field `FAULT1_CLR_INT_ENA` reader - The enable bit for the interrupt triggered when event_f1 ends."]
pub type FAULT1_CLR_INT_ENA_R = crate::BitReader;
#[doc = "Field `FAULT1_CLR_INT_ENA` writer - The enable bit for the interrupt triggered when event_f1 ends."]
pub type FAULT1_CLR_INT_ENA_W<'a, REG, const O: u8> = crate::BitWriter<'a, REG, O>;
#[doc = "Field `FAULT2_CLR_INT_ENA` reader - The enable bit for the interrupt triggered when event_f2 ends."]
pub type FAULT2_CLR_INT_ENA_R = crate::BitReader;
#[doc = "Field `FAULT2_CLR_INT_ENA` writer - The enable bit for the interrupt triggered when event_f2 ends."]
pub type FAULT2_CLR_INT_ENA_W<'a, REG, const O: u8> = crate::BitWriter<'a, REG, O>;
#[doc = "Field `CMPR0_TEA_INT_ENA` reader - The enable bit for the interrupt triggered by a PWM operator 0 TEA event"]
pub type CMPR0_TEA_INT_ENA_R = crate::BitReader;
#[doc = "Field `CMPR0_TEA_INT_ENA` writer - The enable bit for the interrupt triggered by a PWM operator 0 TEA event"]
pub type CMPR0_TEA_INT_ENA_W<'a, REG, const O: u8> = crate::BitWriter<'a, REG, O>;
#[doc = "Field `CMPR1_TEA_INT_ENA` reader - The enable bit for the interrupt triggered by a PWM operator 1 TEA event"]
pub type CMPR1_TEA_INT_ENA_R = crate::BitReader;
#[doc = "Field `CMPR1_TEA_INT_ENA` writer - The enable bit for the interrupt triggered by a PWM operator 1 TEA event"]
pub type CMPR1_TEA_INT_ENA_W<'a, REG, const O: u8> = crate::BitWriter<'a, REG, O>;
#[doc = "Field `CMPR2_TEA_INT_ENA` reader - The enable bit for the interrupt triggered by a PWM operator 2 TEA event"]
pub type CMPR2_TEA_INT_ENA_R = crate::BitReader;
#[doc = "Field `CMPR2_TEA_INT_ENA` writer - The enable bit for the interrupt triggered by a PWM operator 2 TEA event"]
pub type CMPR2_TEA_INT_ENA_W<'a, REG, const O: u8> = crate::BitWriter<'a, REG, O>;
#[doc = "Field `CMPR0_TEB_INT_ENA` reader - The enable bit for the interrupt triggered by a PWM operator 0 TEB event"]
pub type CMPR0_TEB_INT_ENA_R = crate::BitReader;
#[doc = "Field `CMPR0_TEB_INT_ENA` writer - The enable bit for the interrupt triggered by a PWM operator 0 TEB event"]
pub type CMPR0_TEB_INT_ENA_W<'a, REG, const O: u8> = crate::BitWriter<'a, REG, O>;
#[doc = "Field `CMPR1_TEB_INT_ENA` reader - The enable bit for the interrupt triggered by a PWM operator 1 TEB event"]
pub type CMPR1_TEB_INT_ENA_R = crate::BitReader;
#[doc = "Field `CMPR1_TEB_INT_ENA` writer - The enable bit for the interrupt triggered by a PWM operator 1 TEB event"]
pub type CMPR1_TEB_INT_ENA_W<'a, REG, const O: u8> = crate::BitWriter<'a, REG, O>;
#[doc = "Field `CMPR2_TEB_INT_ENA` reader - The enable bit for the interrupt triggered by a PWM operator 2 TEB event"]
pub type CMPR2_TEB_INT_ENA_R = crate::BitReader;
#[doc = "Field `CMPR2_TEB_INT_ENA` writer - The enable bit for the interrupt triggered by a PWM operator 2 TEB event"]
pub type CMPR2_TEB_INT_ENA_W<'a, REG, const O: u8> = crate::BitWriter<'a, REG, O>;
#[doc = "Field `TZ0_CBC_INT_ENA` reader - The enable bit for the interrupt triggered by a cycle-by-cycle mode action on PWM0."]
pub type TZ0_CBC_INT_ENA_R = crate::BitReader;
#[doc = "Field `TZ0_CBC_INT_ENA` writer - The enable bit for the interrupt triggered by a cycle-by-cycle mode action on PWM0."]
pub type TZ0_CBC_INT_ENA_W<'a, REG, const O: u8> = crate::BitWriter<'a, REG, O>;
#[doc = "Field `TZ1_CBC_INT_ENA` reader - The enable bit for the interrupt triggered by a cycle-by-cycle mode action on PWM1."]
pub type TZ1_CBC_INT_ENA_R = crate::BitReader;
#[doc = "Field `TZ1_CBC_INT_ENA` writer - The enable bit for the interrupt triggered by a cycle-by-cycle mode action on PWM1."]
pub type TZ1_CBC_INT_ENA_W<'a, REG, const O: u8> = crate::BitWriter<'a, REG, O>;
#[doc = "Field `TZ2_CBC_INT_ENA` reader - The enable bit for the interrupt triggered by a cycle-by-cycle mode action on PWM2."]
pub type TZ2_CBC_INT_ENA_R = crate::BitReader;
#[doc = "Field `TZ2_CBC_INT_ENA` writer - The enable bit for the interrupt triggered by a cycle-by-cycle mode action on PWM2."]
pub type TZ2_CBC_INT_ENA_W<'a, REG, const O: u8> = crate::BitWriter<'a, REG, O>;
#[doc = "Field `TZ0_OST_INT_ENA` reader - The enable bit for the interrupt triggered by a one-shot mode action on PWM0."]
pub type TZ0_OST_INT_ENA_R = crate::BitReader;
#[doc = "Field `TZ0_OST_INT_ENA` writer - The enable bit for the interrupt triggered by a one-shot mode action on PWM0."]
pub type TZ0_OST_INT_ENA_W<'a, REG, const O: u8> = crate::BitWriter<'a, REG, O>;
#[doc = "Field `TZ1_OST_INT_ENA` reader - The enable bit for the interrupt triggered by a one-shot mode action on PWM1."]
pub type TZ1_OST_INT_ENA_R = crate::BitReader;
#[doc = "Field `TZ1_OST_INT_ENA` writer - The enable bit for the interrupt triggered by a one-shot mode action on PWM1."]
pub type TZ1_OST_INT_ENA_W<'a, REG, const O: u8> = crate::BitWriter<'a, REG, O>;
#[doc = "Field `TZ2_OST_INT_ENA` reader - The enable bit for the interrupt triggered by a one-shot mode action on PWM2."]
pub type TZ2_OST_INT_ENA_R = crate::BitReader;
#[doc = "Field `TZ2_OST_INT_ENA` writer - The enable bit for the interrupt triggered by a one-shot mode action on PWM2."]
pub type TZ2_OST_INT_ENA_W<'a, REG, const O: u8> = crate::BitWriter<'a, REG, O>;
#[doc = "Field `CAP0_INT_ENA` reader - The enable bit for the interrupt triggered by capture on channel 0."]
pub type CAP0_INT_ENA_R = crate::BitReader;
#[doc = "Field `CAP0_INT_ENA` writer - The enable bit for the interrupt triggered by capture on channel 0."]
pub type CAP0_INT_ENA_W<'a, REG, const O: u8> = crate::BitWriter<'a, REG, O>;
#[doc = "Field `CAP1_INT_ENA` reader - The enable bit for the interrupt triggered by capture on channel 1."]
pub type CAP1_INT_ENA_R = crate::BitReader;
#[doc = "Field `CAP1_INT_ENA` writer - The enable bit for the interrupt triggered by capture on channel 1."]
pub type CAP1_INT_ENA_W<'a, REG, const O: u8> = crate::BitWriter<'a, REG, O>;
#[doc = "Field `CAP2_INT_ENA` reader - The enable bit for the interrupt triggered by capture on channel 2."]
pub type CAP2_INT_ENA_R = crate::BitReader;
#[doc = "Field `CAP2_INT_ENA` writer - The enable bit for the interrupt triggered by capture on channel 2."]
pub type CAP2_INT_ENA_W<'a, REG, const O: u8> = crate::BitWriter<'a, REG, O>;
impl R {
#[doc = "Bit 0 - The enable bit for the interrupt triggered when the timer 0 stops."]
#[inline(always)]
pub fn timer0_stop_int_ena(&self) -> TIMER0_STOP_INT_ENA_R {
TIMER0_STOP_INT_ENA_R::new((self.bits & 1) != 0)
}
#[doc = "Bit 1 - The enable bit for the interrupt triggered when the timer 1 stops."]
#[inline(always)]
pub fn timer1_stop_int_ena(&self) -> TIMER1_STOP_INT_ENA_R {
TIMER1_STOP_INT_ENA_R::new(((self.bits >> 1) & 1) != 0)
}
#[doc = "Bit 2 - The enable bit for the interrupt triggered when the timer 2 stops."]
#[inline(always)]
pub fn timer2_stop_int_ena(&self) -> TIMER2_STOP_INT_ENA_R {
TIMER2_STOP_INT_ENA_R::new(((self.bits >> 2) & 1) != 0)
}
#[doc = "Bit 3 - The enable bit for the interrupt triggered by a PWM timer 0 TEZ event."]
#[inline(always)]
pub fn timer0_tez_int_ena(&self) -> TIMER0_TEZ_INT_ENA_R {
TIMER0_TEZ_INT_ENA_R::new(((self.bits >> 3) & 1) != 0)
}
#[doc = "Bit 4 - The enable bit for the interrupt triggered by a PWM timer 1 TEZ event."]
#[inline(always)]
pub fn timer1_tez_int_ena(&self) -> TIMER1_TEZ_INT_ENA_R {
TIMER1_TEZ_INT_ENA_R::new(((self.bits >> 4) & 1) != 0)
}
#[doc = "Bit 5 - The enable bit for the interrupt triggered by a PWM timer 2 TEZ event."]
#[inline(always)]
pub fn timer2_tez_int_ena(&self) -> TIMER2_TEZ_INT_ENA_R {
TIMER2_TEZ_INT_ENA_R::new(((self.bits >> 5) & 1) != 0)
}
#[doc = "Bit 6 - The enable bit for the interrupt triggered by a PWM timer 0 TEP event."]
#[inline(always)]
pub fn timer0_tep_int_ena(&self) -> TIMER0_TEP_INT_ENA_R {
TIMER0_TEP_INT_ENA_R::new(((self.bits >> 6) & 1) != 0)
}
#[doc = "Bit 7 - The enable bit for the interrupt triggered by a PWM timer 1 TEP event."]
#[inline(always)]
pub fn timer1_tep_int_ena(&self) -> TIMER1_TEP_INT_ENA_R {
TIMER1_TEP_INT_ENA_R::new(((self.bits >> 7) & 1) != 0)
}
#[doc = "Bit 8 - The enable bit for the interrupt triggered by a PWM timer 2 TEP event."]
#[inline(always)]
pub fn timer2_tep_int_ena(&self) -> TIMER2_TEP_INT_ENA_R {
TIMER2_TEP_INT_ENA_R::new(((self.bits >> 8) & 1) != 0)
}
#[doc = "Bit 9 - The enable bit for the interrupt triggered when event_f0 starts."]
#[inline(always)]
pub fn fault0_int_ena(&self) -> FAULT0_INT_ENA_R {
FAULT0_INT_ENA_R::new(((self.bits >> 9) & 1) != 0)
}
#[doc = "Bit 10 - The enable bit for the interrupt triggered when event_f1 starts."]
#[inline(always)]
pub fn fault1_int_ena(&self) -> FAULT1_INT_ENA_R {
FAULT1_INT_ENA_R::new(((self.bits >> 10) & 1) != 0)
}
#[doc = "Bit 11 - The enable bit for the interrupt triggered when event_f2 starts."]
#[inline(always)]
pub fn fault2_int_ena(&self) -> FAULT2_INT_ENA_R {
FAULT2_INT_ENA_R::new(((self.bits >> 11) & 1) != 0)
}
#[doc = "Bit 12 - The enable bit for the interrupt triggered when event_f0 ends."]
#[inline(always)]
pub fn fault0_clr_int_ena(&self) -> FAULT0_CLR_INT_ENA_R {
FAULT0_CLR_INT_ENA_R::new(((self.bits >> 12) & 1) != 0)
}
#[doc = "Bit 13 - The enable bit for the interrupt triggered when event_f1 ends."]
#[inline(always)]
pub fn fault1_clr_int_ena(&self) -> FAULT1_CLR_INT_ENA_R {
FAULT1_CLR_INT_ENA_R::new(((self.bits >> 13) & 1) != 0)
}
#[doc = "Bit 14 - The enable bit for the interrupt triggered when event_f2 ends."]
#[inline(always)]
pub fn fault2_clr_int_ena(&self) -> FAULT2_CLR_INT_ENA_R {
FAULT2_CLR_INT_ENA_R::new(((self.bits >> 14) & 1) != 0)
}
#[doc = "Bit 15 - The enable bit for the interrupt triggered by a PWM operator 0 TEA event"]
#[inline(always)]
pub fn cmpr0_tea_int_ena(&self) -> CMPR0_TEA_INT_ENA_R {
CMPR0_TEA_INT_ENA_R::new(((self.bits >> 15) & 1) != 0)
}
#[doc = "Bit 16 - The enable bit for the interrupt triggered by a PWM operator 1 TEA event"]
#[inline(always)]
pub fn cmpr1_tea_int_ena(&self) -> CMPR1_TEA_INT_ENA_R {
CMPR1_TEA_INT_ENA_R::new(((self.bits >> 16) & 1) != 0)
}
#[doc = "Bit 17 - The enable bit for the interrupt triggered by a PWM operator 2 TEA event"]
#[inline(always)]
pub fn cmpr2_tea_int_ena(&self) -> CMPR2_TEA_INT_ENA_R {
CMPR2_TEA_INT_ENA_R::new(((self.bits >> 17) & 1) != 0)
}
#[doc = "Bit 18 - The enable bit for the interrupt triggered by a PWM operator 0 TEB event"]
#[inline(always)]
pub fn cmpr0_teb_int_ena(&self) -> CMPR0_TEB_INT_ENA_R {
CMPR0_TEB_INT_ENA_R::new(((self.bits >> 18) & 1) != 0)
}
#[doc = "Bit 19 - The enable bit for the interrupt triggered by a PWM operator 1 TEB event"]
#[inline(always)]
pub fn cmpr1_teb_int_ena(&self) -> CMPR1_TEB_INT_ENA_R {
CMPR1_TEB_INT_ENA_R::new(((self.bits >> 19) & 1) != 0)
}
#[doc = "Bit 20 - The enable bit for the interrupt triggered by a PWM operator 2 TEB event"]
#[inline(always)]
pub fn cmpr2_teb_int_ena(&self) -> CMPR2_TEB_INT_ENA_R {
CMPR2_TEB_INT_ENA_R::new(((self.bits >> 20) & 1) != 0)
}
#[doc = "Bit 21 - The enable bit for the interrupt triggered by a cycle-by-cycle mode action on PWM0."]
#[inline(always)]
pub fn tz0_cbc_int_ena(&self) -> TZ0_CBC_INT_ENA_R {
TZ0_CBC_INT_ENA_R::new(((self.bits >> 21) & 1) != 0)
}
#[doc = "Bit 22 - The enable bit for the interrupt triggered by a cycle-by-cycle mode action on PWM1."]
#[inline(always)]
pub fn tz1_cbc_int_ena(&self) -> TZ1_CBC_INT_ENA_R {
TZ1_CBC_INT_ENA_R::new(((self.bits >> 22) & 1) != 0)
}
#[doc = "Bit 23 - The enable bit for the interrupt triggered by a cycle-by-cycle mode action on PWM2."]
#[inline(always)]
pub fn tz2_cbc_int_ena(&self) -> TZ2_CBC_INT_ENA_R {
TZ2_CBC_INT_ENA_R::new(((self.bits >> 23) & 1) != 0)
}
#[doc = "Bit 24 - The enable bit for the interrupt triggered by a one-shot mode action on PWM0."]
#[inline(always)]
pub fn tz0_ost_int_ena(&self) -> TZ0_OST_INT_ENA_R {
TZ0_OST_INT_ENA_R::new(((self.bits >> 24) & 1) != 0)
}
#[doc = "Bit 25 - The enable bit for the interrupt triggered by a one-shot mode action on PWM1."]
#[inline(always)]
pub fn tz1_ost_int_ena(&self) -> TZ1_OST_INT_ENA_R {
TZ1_OST_INT_ENA_R::new(((self.bits >> 25) & 1) != 0)
}
#[doc = "Bit 26 - The enable bit for the interrupt triggered by a one-shot mode action on PWM2."]
#[inline(always)]
pub fn tz2_ost_int_ena(&self) -> TZ2_OST_INT_ENA_R {
TZ2_OST_INT_ENA_R::new(((self.bits >> 26) & 1) != 0)
}
#[doc = "Bit 27 - The enable bit for the interrupt triggered by capture on channel 0."]
#[inline(always)]
pub fn cap0_int_ena(&self) -> CAP0_INT_ENA_R {
CAP0_INT_ENA_R::new(((self.bits >> 27) & 1) != 0)
}
#[doc = "Bit 28 - The enable bit for the interrupt triggered by capture on channel 1."]
#[inline(always)]
pub fn cap1_int_ena(&self) -> CAP1_INT_ENA_R {
CAP1_INT_ENA_R::new(((self.bits >> 28) & 1) != 0)
}
#[doc = "Bit 29 - The enable bit for the interrupt triggered by capture on channel 2."]
#[inline(always)]
pub fn cap2_int_ena(&self) -> CAP2_INT_ENA_R {
CAP2_INT_ENA_R::new(((self.bits >> 29) & 1) != 0)
}
}
#[cfg(feature = "impl-register-debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
f.debug_struct("INT_ENA")
.field(
"timer0_stop_int_ena",
&format_args!("{}", self.timer0_stop_int_ena().bit()),
)
.field(
"timer1_stop_int_ena",
&format_args!("{}", self.timer1_stop_int_ena().bit()),
)
.field(
"timer2_stop_int_ena",
&format_args!("{}", self.timer2_stop_int_ena().bit()),
)
.field(
"timer0_tez_int_ena",
&format_args!("{}", self.timer0_tez_int_ena().bit()),
)
.field(
"timer1_tez_int_ena",
&format_args!("{}", self.timer1_tez_int_ena().bit()),
)
.field(
"timer2_tez_int_ena",
&format_args!("{}", self.timer2_tez_int_ena().bit()),
)
.field(
"timer0_tep_int_ena",
&format_args!("{}", self.timer0_tep_int_ena().bit()),
)
.field(
"timer1_tep_int_ena",
&format_args!("{}", self.timer1_tep_int_ena().bit()),
)
.field(
"timer2_tep_int_ena",
&format_args!("{}", self.timer2_tep_int_ena().bit()),
)
.field(
"fault0_int_ena",
&format_args!("{}", self.fault0_int_ena().bit()),
)
.field(
"fault1_int_ena",
&format_args!("{}", self.fault1_int_ena().bit()),
)
.field(
"fault2_int_ena",
&format_args!("{}", self.fault2_int_ena().bit()),
)
.field(
"fault0_clr_int_ena",
&format_args!("{}", self.fault0_clr_int_ena().bit()),
)
.field(
"fault1_clr_int_ena",
&format_args!("{}", self.fault1_clr_int_ena().bit()),
)
.field(
"fault2_clr_int_ena",
&format_args!("{}", self.fault2_clr_int_ena().bit()),
)
.field(
"cmpr0_tea_int_ena",
&format_args!("{}", self.cmpr0_tea_int_ena().bit()),
)
.field(
"cmpr1_tea_int_ena",
&format_args!("{}", self.cmpr1_tea_int_ena().bit()),
)
.field(
"cmpr2_tea_int_ena",
&format_args!("{}", self.cmpr2_tea_int_ena().bit()),
)
.field(
"cmpr0_teb_int_ena",
&format_args!("{}", self.cmpr0_teb_int_ena().bit()),
)
.field(
"cmpr1_teb_int_ena",
&format_args!("{}", self.cmpr1_teb_int_ena().bit()),
)
.field(
"cmpr2_teb_int_ena",
&format_args!("{}", self.cmpr2_teb_int_ena().bit()),
)
.field(
"tz0_cbc_int_ena",
&format_args!("{}", self.tz0_cbc_int_ena().bit()),
)
.field(
"tz1_cbc_int_ena",
&format_args!("{}", self.tz1_cbc_int_ena().bit()),
)
.field(
"tz2_cbc_int_ena",
&format_args!("{}", self.tz2_cbc_int_ena().bit()),
)
.field(
"tz0_ost_int_ena",
&format_args!("{}", self.tz0_ost_int_ena().bit()),
)
.field(
"tz1_ost_int_ena",
&format_args!("{}", self.tz1_ost_int_ena().bit()),
)
.field(
"tz2_ost_int_ena",
&format_args!("{}", self.tz2_ost_int_ena().bit()),
)
.field(
"cap0_int_ena",
&format_args!("{}", self.cap0_int_ena().bit()),
)
.field(
"cap1_int_ena",
&format_args!("{}", self.cap1_int_ena().bit()),
)
.field(
"cap2_int_ena",
&format_args!("{}", self.cap2_int_ena().bit()),
)
.finish()
}
}
#[cfg(feature = "impl-register-debug")]
impl core::fmt::Debug for crate::generic::Reg<INT_ENA_SPEC> {
fn fmt(&self, f: &mut core::fmt::Formatter<'_>) -> core::fmt::Result {
self.read().fmt(f)
}
}
impl W {
#[doc = "Bit 0 - The enable bit for the interrupt triggered when the timer 0 stops."]
#[inline(always)]
#[must_use]
pub fn timer0_stop_int_ena(&mut self) -> TIMER0_STOP_INT_ENA_W<INT_ENA_SPEC, 0> {
TIMER0_STOP_INT_ENA_W::new(self)
}
#[doc = "Bit 1 - The enable bit for the interrupt triggered when the timer 1 stops."]
#[inline(always)]
#[must_use]
pub fn timer1_stop_int_ena(&mut self) -> TIMER1_STOP_INT_ENA_W<INT_ENA_SPEC, 1> {
TIMER1_STOP_INT_ENA_W::new(self)
}
#[doc = "Bit 2 - The enable bit for the interrupt triggered when the timer 2 stops."]
#[inline(always)]
#[must_use]
pub fn timer2_stop_int_ena(&mut self) -> TIMER2_STOP_INT_ENA_W<INT_ENA_SPEC, 2> {
TIMER2_STOP_INT_ENA_W::new(self)
}
#[doc = "Bit 3 - The enable bit for the interrupt triggered by a PWM timer 0 TEZ event."]
#[inline(always)]
#[must_use]
pub fn timer0_tez_int_ena(&mut self) -> TIMER0_TEZ_INT_ENA_W<INT_ENA_SPEC, 3> {
TIMER0_TEZ_INT_ENA_W::new(self)
}
#[doc = "Bit 4 - The enable bit for the interrupt triggered by a PWM timer 1 TEZ event."]
#[inline(always)]
#[must_use]
pub fn timer1_tez_int_ena(&mut self) -> TIMER1_TEZ_INT_ENA_W<INT_ENA_SPEC, 4> {
TIMER1_TEZ_INT_ENA_W::new(self)
}
#[doc = "Bit 5 - The enable bit for the interrupt triggered by a PWM timer 2 TEZ event."]
#[inline(always)]
#[must_use]
pub fn timer2_tez_int_ena(&mut self) -> TIMER2_TEZ_INT_ENA_W<INT_ENA_SPEC, 5> {
TIMER2_TEZ_INT_ENA_W::new(self)
}
#[doc = "Bit 6 - The enable bit for the interrupt triggered by a PWM timer 0 TEP event."]
#[inline(always)]
#[must_use]
pub fn timer0_tep_int_ena(&mut self) -> TIMER0_TEP_INT_ENA_W<INT_ENA_SPEC, 6> {
TIMER0_TEP_INT_ENA_W::new(self)
}
#[doc = "Bit 7 - The enable bit for the interrupt triggered by a PWM timer 1 TEP event."]
#[inline(always)]
#[must_use]
pub fn timer1_tep_int_ena(&mut self) -> TIMER1_TEP_INT_ENA_W<INT_ENA_SPEC, 7> {
TIMER1_TEP_INT_ENA_W::new(self)
}
#[doc = "Bit 8 - The enable bit for the interrupt triggered by a PWM timer 2 TEP event."]
#[inline(always)]
#[must_use]
pub fn timer2_tep_int_ena(&mut self) -> TIMER2_TEP_INT_ENA_W<INT_ENA_SPEC, 8> {
TIMER2_TEP_INT_ENA_W::new(self)
}
#[doc = "Bit 9 - The enable bit for the interrupt triggered when event_f0 starts."]
#[inline(always)]
#[must_use]
pub fn fault0_int_ena(&mut self) -> FAULT0_INT_ENA_W<INT_ENA_SPEC, 9> {
FAULT0_INT_ENA_W::new(self)
}
#[doc = "Bit 10 - The enable bit for the interrupt triggered when event_f1 starts."]
#[inline(always)]
#[must_use]
pub fn fault1_int_ena(&mut self) -> FAULT1_INT_ENA_W<INT_ENA_SPEC, 10> {
FAULT1_INT_ENA_W::new(self)
}
#[doc = "Bit 11 - The enable bit for the interrupt triggered when event_f2 starts."]
#[inline(always)]
#[must_use]
pub fn fault2_int_ena(&mut self) -> FAULT2_INT_ENA_W<INT_ENA_SPEC, 11> {
FAULT2_INT_ENA_W::new(self)
}
#[doc = "Bit 12 - The enable bit for the interrupt triggered when event_f0 ends."]
#[inline(always)]
#[must_use]
pub fn fault0_clr_int_ena(&mut self) -> FAULT0_CLR_INT_ENA_W<INT_ENA_SPEC, 12> {
FAULT0_CLR_INT_ENA_W::new(self)
}
#[doc = "Bit 13 - The enable bit for the interrupt triggered when event_f1 ends."]
#[inline(always)]
#[must_use]
pub fn fault1_clr_int_ena(&mut self) -> FAULT1_CLR_INT_ENA_W<INT_ENA_SPEC, 13> {
FAULT1_CLR_INT_ENA_W::new(self)
}
#[doc = "Bit 14 - The enable bit for the interrupt triggered when event_f2 ends."]
#[inline(always)]
#[must_use]
pub fn fault2_clr_int_ena(&mut self) -> FAULT2_CLR_INT_ENA_W<INT_ENA_SPEC, 14> {
FAULT2_CLR_INT_ENA_W::new(self)
}
#[doc = "Bit 15 - The enable bit for the interrupt triggered by a PWM operator 0 TEA event"]
#[inline(always)]
#[must_use]
pub fn cmpr0_tea_int_ena(&mut self) -> CMPR0_TEA_INT_ENA_W<INT_ENA_SPEC, 15> {
CMPR0_TEA_INT_ENA_W::new(self)
}
#[doc = "Bit 16 - The enable bit for the interrupt triggered by a PWM operator 1 TEA event"]
#[inline(always)]
#[must_use]
pub fn cmpr1_tea_int_ena(&mut self) -> CMPR1_TEA_INT_ENA_W<INT_ENA_SPEC, 16> {
CMPR1_TEA_INT_ENA_W::new(self)
}
#[doc = "Bit 17 - The enable bit for the interrupt triggered by a PWM operator 2 TEA event"]
#[inline(always)]
#[must_use]
pub fn cmpr2_tea_int_ena(&mut self) -> CMPR2_TEA_INT_ENA_W<INT_ENA_SPEC, 17> {
CMPR2_TEA_INT_ENA_W::new(self)
}
#[doc = "Bit 18 - The enable bit for the interrupt triggered by a PWM operator 0 TEB event"]
#[inline(always)]
#[must_use]
pub fn cmpr0_teb_int_ena(&mut self) -> CMPR0_TEB_INT_ENA_W<INT_ENA_SPEC, 18> {
CMPR0_TEB_INT_ENA_W::new(self)
}
#[doc = "Bit 19 - The enable bit for the interrupt triggered by a PWM operator 1 TEB event"]
#[inline(always)]
#[must_use]
pub fn cmpr1_teb_int_ena(&mut self) -> CMPR1_TEB_INT_ENA_W<INT_ENA_SPEC, 19> {
CMPR1_TEB_INT_ENA_W::new(self)
}
#[doc = "Bit 20 - The enable bit for the interrupt triggered by a PWM operator 2 TEB event"]
#[inline(always)]
#[must_use]
pub fn cmpr2_teb_int_ena(&mut self) -> CMPR2_TEB_INT_ENA_W<INT_ENA_SPEC, 20> {
CMPR2_TEB_INT_ENA_W::new(self)
}
#[doc = "Bit 21 - The enable bit for the interrupt triggered by a cycle-by-cycle mode action on PWM0."]
#[inline(always)]
#[must_use]
pub fn tz0_cbc_int_ena(&mut self) -> TZ0_CBC_INT_ENA_W<INT_ENA_SPEC, 21> {
TZ0_CBC_INT_ENA_W::new(self)
}
#[doc = "Bit 22 - The enable bit for the interrupt triggered by a cycle-by-cycle mode action on PWM1."]
#[inline(always)]
#[must_use]
pub fn tz1_cbc_int_ena(&mut self) -> TZ1_CBC_INT_ENA_W<INT_ENA_SPEC, 22> {
TZ1_CBC_INT_ENA_W::new(self)
}
#[doc = "Bit 23 - The enable bit for the interrupt triggered by a cycle-by-cycle mode action on PWM2."]
#[inline(always)]
#[must_use]
pub fn tz2_cbc_int_ena(&mut self) -> TZ2_CBC_INT_ENA_W<INT_ENA_SPEC, 23> {
TZ2_CBC_INT_ENA_W::new(self)
}
#[doc = "Bit 24 - The enable bit for the interrupt triggered by a one-shot mode action on PWM0."]
#[inline(always)]
#[must_use]
pub fn tz0_ost_int_ena(&mut self) -> TZ0_OST_INT_ENA_W<INT_ENA_SPEC, 24> {
TZ0_OST_INT_ENA_W::new(self)
}
#[doc = "Bit 25 - The enable bit for the interrupt triggered by a one-shot mode action on PWM1."]
#[inline(always)]
#[must_use]
pub fn tz1_ost_int_ena(&mut self) -> TZ1_OST_INT_ENA_W<INT_ENA_SPEC, 25> {
TZ1_OST_INT_ENA_W::new(self)
}
#[doc = "Bit 26 - The enable bit for the interrupt triggered by a one-shot mode action on PWM2."]
#[inline(always)]
#[must_use]
pub fn tz2_ost_int_ena(&mut self) -> TZ2_OST_INT_ENA_W<INT_ENA_SPEC, 26> {
TZ2_OST_INT_ENA_W::new(self)
}
#[doc = "Bit 27 - The enable bit for the interrupt triggered by capture on channel 0."]
#[inline(always)]
#[must_use]
pub fn cap0_int_ena(&mut self) -> CAP0_INT_ENA_W<INT_ENA_SPEC, 27> {
CAP0_INT_ENA_W::new(self)
}
#[doc = "Bit 28 - The enable bit for the interrupt triggered by capture on channel 1."]
#[inline(always)]
#[must_use]
pub fn cap1_int_ena(&mut self) -> CAP1_INT_ENA_W<INT_ENA_SPEC, 28> {
CAP1_INT_ENA_W::new(self)
}
#[doc = "Bit 29 - The enable bit for the interrupt triggered by capture on channel 2."]
#[inline(always)]
#[must_use]
pub fn cap2_int_ena(&mut self) -> CAP2_INT_ENA_W<INT_ENA_SPEC, 29> {
CAP2_INT_ENA_W::new(self)
}
#[doc = "Writes raw bits to the register."]
#[inline(always)]
pub unsafe fn bits(&mut self, bits: u32) -> &mut Self {
self.bits = bits;
self
}
}
#[doc = "Interrupt enable bits\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`int_ena::R`](R). You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`int_ena::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
pub struct INT_ENA_SPEC;
impl crate::RegisterSpec for INT_ENA_SPEC {
type Ux = u32;
}
#[doc = "`read()` method returns [`int_ena::R`](R) reader structure"]
impl crate::Readable for INT_ENA_SPEC {}
#[doc = "`write(|w| ..)` method takes [`int_ena::W`](W) writer structure"]
impl crate::Writable for INT_ENA_SPEC {
const ZERO_TO_MODIFY_FIELDS_BITMAP: Self::Ux = 0;
const ONE_TO_MODIFY_FIELDS_BITMAP: Self::Ux = 0;
}
#[doc = "`reset()` method sets INT_ENA to value 0"]
impl crate::Resettable for INT_ENA_SPEC {
const RESET_VALUE: Self::Ux = 0;
}