1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139

#[doc = "Register `CH%s_CONF0` reader"]
pub type R = crate::R<CH_CONF0_SPEC>;
#[doc = "Register `CH%s_CONF0` writer"]
pub type W = crate::W<CH_CONF0_SPEC>;
#[doc = "Field `TIMER_SEL` reader - This field is used to select one of timers for channel %s. 0: select timer0, 1: select timer1, 2: select timer2, 3: select timer3"]
pub type TIMER_SEL_R = crate::FieldReader;
#[doc = "Field `TIMER_SEL` writer - This field is used to select one of timers for channel %s. 0: select timer0, 1: select timer1, 2: select timer2, 3: select timer3"]
pub type TIMER_SEL_W<'a, REG, const O: u8> = crate::FieldWriter<'a, REG, 2, O>;
#[doc = "Field `SIG_OUT_EN` reader - Set this bit to enable signal output on channel %s."]
pub type SIG_OUT_EN_R = crate::BitReader;
#[doc = "Field `SIG_OUT_EN` writer - Set this bit to enable signal output on channel %s."]
pub type SIG_OUT_EN_W<'a, REG, const O: u8> = crate::BitWriter<'a, REG, O>;
#[doc = "Field `IDLE_LV` reader - This bit is used to control the output value when channel %s is inactive (when LEDC_SIG_OUT_EN_CH%s is 0)."]
pub type IDLE_LV_R = crate::BitReader;
#[doc = "Field `IDLE_LV` writer - This bit is used to control the output value when channel %s is inactive (when LEDC_SIG_OUT_EN_CH%s is 0)."]
pub type IDLE_LV_W<'a, REG, const O: u8> = crate::BitWriter<'a, REG, O>;
#[doc = "Field `PARA_UP` writer - This bit is used to update LEDC_HPOINT_CH%s, LEDC_DUTY_START_CH%s, LEDC_SIG_OUT_EN_CH%s, LEDC_TIMER_SEL_CH%s, LEDC_DUTY_NUM_CH%s, LEDC_DUTY_CYCLE_CH%s, LEDC_DUTY_SCALE_CH%s, LEDC_DUTY_INC_CH%s, and LEDC_OVF_CNT_EN_CH%s fields for channel %s, and will be automatically cleared by hardware."]
pub type PARA_UP_W<'a, REG, const O: u8> = crate::BitWriter<'a, REG, O>;
#[doc = "Field `OVF_NUM` reader - This register is used to configure the maximum times of overflow minus 1. The LEDC_OVF_CNT_CH%s_INT interrupt will be triggered when channel %s overflows for (LEDC_OVF_NUM_CH%s + 1) times."]
pub type OVF_NUM_R = crate::FieldReader<u16>;
#[doc = "Field `OVF_NUM` writer - This register is used to configure the maximum times of overflow minus 1. The LEDC_OVF_CNT_CH%s_INT interrupt will be triggered when channel %s overflows for (LEDC_OVF_NUM_CH%s + 1) times."]
pub type OVF_NUM_W<'a, REG, const O: u8> = crate::FieldWriter<'a, REG, 10, O, u16>;
#[doc = "Field `OVF_CNT_EN` reader - This bit is used to enable the ovf_cnt of channel %s."]
pub type OVF_CNT_EN_R = crate::BitReader;
#[doc = "Field `OVF_CNT_EN` writer - This bit is used to enable the ovf_cnt of channel %s."]
pub type OVF_CNT_EN_W<'a, REG, const O: u8> = crate::BitWriter<'a, REG, O>;
#[doc = "Field `OVF_CNT_RESET` writer - Set this bit to reset the ovf_cnt of channel %s."]
pub type OVF_CNT_RESET_W<'a, REG, const O: u8> = crate::BitWriter<'a, REG, O>;
impl R {
    #[doc = "Bits 0:1 - This field is used to select one of timers for channel %s. 0: select timer0, 1: select timer1, 2: select timer2, 3: select timer3"]
    #[inline(always)]
    pub fn timer_sel(&self) -> TIMER_SEL_R {
        TIMER_SEL_R::new((self.bits & 3) as u8)
    }
    #[doc = "Bit 2 - Set this bit to enable signal output on channel %s."]
    #[inline(always)]
    pub fn sig_out_en(&self) -> SIG_OUT_EN_R {
        SIG_OUT_EN_R::new(((self.bits >> 2) & 1) != 0)
    }
    #[doc = "Bit 3 - This bit is used to control the output value when channel %s is inactive (when LEDC_SIG_OUT_EN_CH%s is 0)."]
    #[inline(always)]
    pub fn idle_lv(&self) -> IDLE_LV_R {
        IDLE_LV_R::new(((self.bits >> 3) & 1) != 0)
    }
    #[doc = "Bits 5:14 - This register is used to configure the maximum times of overflow minus 1. The LEDC_OVF_CNT_CH%s_INT interrupt will be triggered when channel %s overflows for (LEDC_OVF_NUM_CH%s + 1) times."]
    #[inline(always)]
    pub fn ovf_num(&self) -> OVF_NUM_R {
        OVF_NUM_R::new(((self.bits >> 5) & 0x03ff) as u16)
    }
    #[doc = "Bit 15 - This bit is used to enable the ovf_cnt of channel %s."]
    #[inline(always)]
    pub fn ovf_cnt_en(&self) -> OVF_CNT_EN_R {
        OVF_CNT_EN_R::new(((self.bits >> 15) & 1) != 0)
    }
}
#[cfg(feature = "impl-register-debug")]
impl core::fmt::Debug for R {
    fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
        f.debug_struct("CH_CONF0")
            .field("timer_sel", &format_args!("{}", self.timer_sel().bits()))
            .field("sig_out_en", &format_args!("{}", self.sig_out_en().bit()))
            .field("idle_lv", &format_args!("{}", self.idle_lv().bit()))
            .field("ovf_num", &format_args!("{}", self.ovf_num().bits()))
            .field("ovf_cnt_en", &format_args!("{}", self.ovf_cnt_en().bit()))
            .finish()
    }
}
#[cfg(feature = "impl-register-debug")]
impl core::fmt::Debug for crate::generic::Reg<CH_CONF0_SPEC> {
    fn fmt(&self, f: &mut core::fmt::Formatter<'_>) -> core::fmt::Result {
        self.read().fmt(f)
    }
}
impl W {
    #[doc = "Bits 0:1 - This field is used to select one of timers for channel %s. 0: select timer0, 1: select timer1, 2: select timer2, 3: select timer3"]
    #[inline(always)]
    #[must_use]
    pub fn timer_sel(&mut self) -> TIMER_SEL_W<CH_CONF0_SPEC, 0> {
        TIMER_SEL_W::new(self)
    }
    #[doc = "Bit 2 - Set this bit to enable signal output on channel %s."]
    #[inline(always)]
    #[must_use]
    pub fn sig_out_en(&mut self) -> SIG_OUT_EN_W<CH_CONF0_SPEC, 2> {
        SIG_OUT_EN_W::new(self)
    }
    #[doc = "Bit 3 - This bit is used to control the output value when channel %s is inactive (when LEDC_SIG_OUT_EN_CH%s is 0)."]
    #[inline(always)]
    #[must_use]
    pub fn idle_lv(&mut self) -> IDLE_LV_W<CH_CONF0_SPEC, 3> {
        IDLE_LV_W::new(self)
    }
    #[doc = "Bit 4 - This bit is used to update LEDC_HPOINT_CH%s, LEDC_DUTY_START_CH%s, LEDC_SIG_OUT_EN_CH%s, LEDC_TIMER_SEL_CH%s, LEDC_DUTY_NUM_CH%s, LEDC_DUTY_CYCLE_CH%s, LEDC_DUTY_SCALE_CH%s, LEDC_DUTY_INC_CH%s, and LEDC_OVF_CNT_EN_CH%s fields for channel %s, and will be automatically cleared by hardware."]
    #[inline(always)]
    #[must_use]
    pub fn para_up(&mut self) -> PARA_UP_W<CH_CONF0_SPEC, 4> {
        PARA_UP_W::new(self)
    }
    #[doc = "Bits 5:14 - This register is used to configure the maximum times of overflow minus 1. The LEDC_OVF_CNT_CH%s_INT interrupt will be triggered when channel %s overflows for (LEDC_OVF_NUM_CH%s + 1) times."]
    #[inline(always)]
    #[must_use]
    pub fn ovf_num(&mut self) -> OVF_NUM_W<CH_CONF0_SPEC, 5> {
        OVF_NUM_W::new(self)
    }
    #[doc = "Bit 15 - This bit is used to enable the ovf_cnt of channel %s."]
    #[inline(always)]
    #[must_use]
    pub fn ovf_cnt_en(&mut self) -> OVF_CNT_EN_W<CH_CONF0_SPEC, 15> {
        OVF_CNT_EN_W::new(self)
    }
    #[doc = "Bit 16 - Set this bit to reset the ovf_cnt of channel %s."]
    #[inline(always)]
    #[must_use]
    pub fn ovf_cnt_reset(&mut self) -> OVF_CNT_RESET_W<CH_CONF0_SPEC, 16> {
        OVF_CNT_RESET_W::new(self)
    }
    #[doc = "Writes raw bits to the register."]
    #[inline(always)]
    pub unsafe fn bits(&mut self, bits: u32) -> &mut Self {
        self.bits = bits;
        self
    }
}
#[doc = "Configuration register 0 for channel %s\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`ch_conf0::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`ch_conf0::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
pub struct CH_CONF0_SPEC;
impl crate::RegisterSpec for CH_CONF0_SPEC {
    type Ux = u32;
}
#[doc = "`read()` method returns [`ch_conf0::R`](R) reader structure"]
impl crate::Readable for CH_CONF0_SPEC {}
#[doc = "`write(|w| ..)` method takes [`ch_conf0::W`](W) writer structure"]
impl crate::Writable for CH_CONF0_SPEC {
    const ZERO_TO_MODIFY_FIELDS_BITMAP: Self::Ux = 0;
    const ONE_TO_MODIFY_FIELDS_BITMAP: Self::Ux = 0;
}
#[doc = "`reset()` method sets CH%s_CONF0 to value 0"]
impl crate::Resettable for CH_CONF0_SPEC {
    const RESET_VALUE: Self::Ux = 0;
}