1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144

#[doc = "Register `PLL_DIV_CLK_EN` reader"]
pub type R = crate::R<PLL_DIV_CLK_EN_SPEC>;
#[doc = "Register `PLL_DIV_CLK_EN` writer"]
pub type W = crate::W<PLL_DIV_CLK_EN_SPEC>;
#[doc = "Field `PLL_240M_CLK_EN` reader - This field is used to open 240 MHz clock (div2 of SPLL) drived from SPLL. 0: close, 1: open(default). Only avaliable when high-speed clock-source SPLL is active."]
pub type PLL_240M_CLK_EN_R = crate::BitReader;
#[doc = "Field `PLL_240M_CLK_EN` writer - This field is used to open 240 MHz clock (div2 of SPLL) drived from SPLL. 0: close, 1: open(default). Only avaliable when high-speed clock-source SPLL is active."]
pub type PLL_240M_CLK_EN_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `PLL_160M_CLK_EN` reader - This field is used to open 160 MHz clock (div3 of SPLL) drived from SPLL. 0: close, 1: open(default). Only avaliable when high-speed clock-source SPLL is active."]
pub type PLL_160M_CLK_EN_R = crate::BitReader;
#[doc = "Field `PLL_160M_CLK_EN` writer - This field is used to open 160 MHz clock (div3 of SPLL) drived from SPLL. 0: close, 1: open(default). Only avaliable when high-speed clock-source SPLL is active."]
pub type PLL_160M_CLK_EN_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `PLL_120M_CLK_EN` reader - This field is used to open 120 MHz clock (div4 of SPLL) drived from SPLL. 0: close, 1: open(default). Only avaliable when high-speed clock-source SPLL is active."]
pub type PLL_120M_CLK_EN_R = crate::BitReader;
#[doc = "Field `PLL_120M_CLK_EN` writer - This field is used to open 120 MHz clock (div4 of SPLL) drived from SPLL. 0: close, 1: open(default). Only avaliable when high-speed clock-source SPLL is active."]
pub type PLL_120M_CLK_EN_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `PLL_80M_CLK_EN` reader - This field is used to open 80 MHz clock (div6 of SPLL) drived from SPLL. 0: close, 1: open(default). Only avaliable when high-speed clock-source SPLL is active."]
pub type PLL_80M_CLK_EN_R = crate::BitReader;
#[doc = "Field `PLL_80M_CLK_EN` writer - This field is used to open 80 MHz clock (div6 of SPLL) drived from SPLL. 0: close, 1: open(default). Only avaliable when high-speed clock-source SPLL is active."]
pub type PLL_80M_CLK_EN_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `PLL_48M_CLK_EN` reader - This field is used to open 48 MHz clock (div10 of SPLL) drived from SPLL. 0: close, 1: open(default). Only avaliable when high-speed clock-source SPLL is active."]
pub type PLL_48M_CLK_EN_R = crate::BitReader;
#[doc = "Field `PLL_48M_CLK_EN` writer - This field is used to open 48 MHz clock (div10 of SPLL) drived from SPLL. 0: close, 1: open(default). Only avaliable when high-speed clock-source SPLL is active."]
pub type PLL_48M_CLK_EN_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `PLL_40M_CLK_EN` reader - This field is used to open 40 MHz clock (div12 of SPLL) drived from SPLL. 0: close, 1: open(default). Only avaliable when high-speed clock-source SPLL is active."]
pub type PLL_40M_CLK_EN_R = crate::BitReader;
#[doc = "Field `PLL_40M_CLK_EN` writer - This field is used to open 40 MHz clock (div12 of SPLL) drived from SPLL. 0: close, 1: open(default). Only avaliable when high-speed clock-source SPLL is active."]
pub type PLL_40M_CLK_EN_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `PLL_20M_CLK_EN` reader - This field is used to open 20 MHz clock (div24 of SPLL) drived from SPLL. 0: close, 1: open(default). Only avaliable when high-speed clock-source SPLL is active."]
pub type PLL_20M_CLK_EN_R = crate::BitReader;
#[doc = "Field `PLL_20M_CLK_EN` writer - This field is used to open 20 MHz clock (div24 of SPLL) drived from SPLL. 0: close, 1: open(default). Only avaliable when high-speed clock-source SPLL is active."]
pub type PLL_20M_CLK_EN_W<'a, REG> = crate::BitWriter<'a, REG>;
impl R {
    #[doc = "Bit 0 - This field is used to open 240 MHz clock (div2 of SPLL) drived from SPLL. 0: close, 1: open(default). Only avaliable when high-speed clock-source SPLL is active."]
    #[inline(always)]
    pub fn pll_240m_clk_en(&self) -> PLL_240M_CLK_EN_R {
        PLL_240M_CLK_EN_R::new((self.bits & 1) != 0)
    }
    #[doc = "Bit 1 - This field is used to open 160 MHz clock (div3 of SPLL) drived from SPLL. 0: close, 1: open(default). Only avaliable when high-speed clock-source SPLL is active."]
    #[inline(always)]
    pub fn pll_160m_clk_en(&self) -> PLL_160M_CLK_EN_R {
        PLL_160M_CLK_EN_R::new(((self.bits >> 1) & 1) != 0)
    }
    #[doc = "Bit 2 - This field is used to open 120 MHz clock (div4 of SPLL) drived from SPLL. 0: close, 1: open(default). Only avaliable when high-speed clock-source SPLL is active."]
    #[inline(always)]
    pub fn pll_120m_clk_en(&self) -> PLL_120M_CLK_EN_R {
        PLL_120M_CLK_EN_R::new(((self.bits >> 2) & 1) != 0)
    }
    #[doc = "Bit 3 - This field is used to open 80 MHz clock (div6 of SPLL) drived from SPLL. 0: close, 1: open(default). Only avaliable when high-speed clock-source SPLL is active."]
    #[inline(always)]
    pub fn pll_80m_clk_en(&self) -> PLL_80M_CLK_EN_R {
        PLL_80M_CLK_EN_R::new(((self.bits >> 3) & 1) != 0)
    }
    #[doc = "Bit 4 - This field is used to open 48 MHz clock (div10 of SPLL) drived from SPLL. 0: close, 1: open(default). Only avaliable when high-speed clock-source SPLL is active."]
    #[inline(always)]
    pub fn pll_48m_clk_en(&self) -> PLL_48M_CLK_EN_R {
        PLL_48M_CLK_EN_R::new(((self.bits >> 4) & 1) != 0)
    }
    #[doc = "Bit 5 - This field is used to open 40 MHz clock (div12 of SPLL) drived from SPLL. 0: close, 1: open(default). Only avaliable when high-speed clock-source SPLL is active."]
    #[inline(always)]
    pub fn pll_40m_clk_en(&self) -> PLL_40M_CLK_EN_R {
        PLL_40M_CLK_EN_R::new(((self.bits >> 5) & 1) != 0)
    }
    #[doc = "Bit 6 - This field is used to open 20 MHz clock (div24 of SPLL) drived from SPLL. 0: close, 1: open(default). Only avaliable when high-speed clock-source SPLL is active."]
    #[inline(always)]
    pub fn pll_20m_clk_en(&self) -> PLL_20M_CLK_EN_R {
        PLL_20M_CLK_EN_R::new(((self.bits >> 6) & 1) != 0)
    }
}
#[cfg(feature = "impl-register-debug")]
impl core::fmt::Debug for R {
    fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
        f.debug_struct("PLL_DIV_CLK_EN")
            .field("pll_240m_clk_en", &self.pll_240m_clk_en())
            .field("pll_160m_clk_en", &self.pll_160m_clk_en())
            .field("pll_120m_clk_en", &self.pll_120m_clk_en())
            .field("pll_80m_clk_en", &self.pll_80m_clk_en())
            .field("pll_48m_clk_en", &self.pll_48m_clk_en())
            .field("pll_40m_clk_en", &self.pll_40m_clk_en())
            .field("pll_20m_clk_en", &self.pll_20m_clk_en())
            .finish()
    }
}
impl W {
    #[doc = "Bit 0 - This field is used to open 240 MHz clock (div2 of SPLL) drived from SPLL. 0: close, 1: open(default). Only avaliable when high-speed clock-source SPLL is active."]
    #[inline(always)]
    #[must_use]
    pub fn pll_240m_clk_en(&mut self) -> PLL_240M_CLK_EN_W<PLL_DIV_CLK_EN_SPEC> {
        PLL_240M_CLK_EN_W::new(self, 0)
    }
    #[doc = "Bit 1 - This field is used to open 160 MHz clock (div3 of SPLL) drived from SPLL. 0: close, 1: open(default). Only avaliable when high-speed clock-source SPLL is active."]
    #[inline(always)]
    #[must_use]
    pub fn pll_160m_clk_en(&mut self) -> PLL_160M_CLK_EN_W<PLL_DIV_CLK_EN_SPEC> {
        PLL_160M_CLK_EN_W::new(self, 1)
    }
    #[doc = "Bit 2 - This field is used to open 120 MHz clock (div4 of SPLL) drived from SPLL. 0: close, 1: open(default). Only avaliable when high-speed clock-source SPLL is active."]
    #[inline(always)]
    #[must_use]
    pub fn pll_120m_clk_en(&mut self) -> PLL_120M_CLK_EN_W<PLL_DIV_CLK_EN_SPEC> {
        PLL_120M_CLK_EN_W::new(self, 2)
    }
    #[doc = "Bit 3 - This field is used to open 80 MHz clock (div6 of SPLL) drived from SPLL. 0: close, 1: open(default). Only avaliable when high-speed clock-source SPLL is active."]
    #[inline(always)]
    #[must_use]
    pub fn pll_80m_clk_en(&mut self) -> PLL_80M_CLK_EN_W<PLL_DIV_CLK_EN_SPEC> {
        PLL_80M_CLK_EN_W::new(self, 3)
    }
    #[doc = "Bit 4 - This field is used to open 48 MHz clock (div10 of SPLL) drived from SPLL. 0: close, 1: open(default). Only avaliable when high-speed clock-source SPLL is active."]
    #[inline(always)]
    #[must_use]
    pub fn pll_48m_clk_en(&mut self) -> PLL_48M_CLK_EN_W<PLL_DIV_CLK_EN_SPEC> {
        PLL_48M_CLK_EN_W::new(self, 4)
    }
    #[doc = "Bit 5 - This field is used to open 40 MHz clock (div12 of SPLL) drived from SPLL. 0: close, 1: open(default). Only avaliable when high-speed clock-source SPLL is active."]
    #[inline(always)]
    #[must_use]
    pub fn pll_40m_clk_en(&mut self) -> PLL_40M_CLK_EN_W<PLL_DIV_CLK_EN_SPEC> {
        PLL_40M_CLK_EN_W::new(self, 5)
    }
    #[doc = "Bit 6 - This field is used to open 20 MHz clock (div24 of SPLL) drived from SPLL. 0: close, 1: open(default). Only avaliable when high-speed clock-source SPLL is active."]
    #[inline(always)]
    #[must_use]
    pub fn pll_20m_clk_en(&mut self) -> PLL_20M_CLK_EN_W<PLL_DIV_CLK_EN_SPEC> {
        PLL_20M_CLK_EN_W::new(self, 6)
    }
}
#[doc = "SPLL DIV clock-gating configuration register\n\nYou can [`read`](crate::Reg::read) this register and get [`pll_div_clk_en::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`pll_div_clk_en::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
pub struct PLL_DIV_CLK_EN_SPEC;
impl crate::RegisterSpec for PLL_DIV_CLK_EN_SPEC {
    type Ux = u32;
}
#[doc = "`read()` method returns [`pll_div_clk_en::R`](R) reader structure"]
impl crate::Readable for PLL_DIV_CLK_EN_SPEC {}
#[doc = "`write(|w| ..)` method takes [`pll_div_clk_en::W`](W) writer structure"]
impl crate::Writable for PLL_DIV_CLK_EN_SPEC {
    type Safety = crate::Unsafe;
    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
}
#[doc = "`reset()` method sets PLL_DIV_CLK_EN to value 0x7f"]
impl crate::Resettable for PLL_DIV_CLK_EN_SPEC {
    const RESET_VALUE: u32 = 0x7f;
}