esp32c6_lp/lp_uart/
rs485_conf_sync.rs

1#[doc = "Register `RS485_CONF_SYNC` reader"]
2pub type R = crate::R<RS485_CONF_SYNC_SPEC>;
3#[doc = "Register `RS485_CONF_SYNC` writer"]
4pub type W = crate::W<RS485_CONF_SYNC_SPEC>;
5#[doc = "Field `DL0_EN` reader - Set this bit to delay the stop bit by 1 bit."]
6pub type DL0_EN_R = crate::BitReader;
7#[doc = "Field `DL0_EN` writer - Set this bit to delay the stop bit by 1 bit."]
8pub type DL0_EN_W<'a, REG> = crate::BitWriter<'a, REG>;
9#[doc = "Field `DL1_EN` reader - Set this bit to delay the stop bit by 1 bit."]
10pub type DL1_EN_R = crate::BitReader;
11#[doc = "Field `DL1_EN` writer - Set this bit to delay the stop bit by 1 bit."]
12pub type DL1_EN_W<'a, REG> = crate::BitWriter<'a, REG>;
13impl R {
14    #[doc = "Bit 1 - Set this bit to delay the stop bit by 1 bit."]
15    #[inline(always)]
16    pub fn dl0_en(&self) -> DL0_EN_R {
17        DL0_EN_R::new(((self.bits >> 1) & 1) != 0)
18    }
19    #[doc = "Bit 2 - Set this bit to delay the stop bit by 1 bit."]
20    #[inline(always)]
21    pub fn dl1_en(&self) -> DL1_EN_R {
22        DL1_EN_R::new(((self.bits >> 2) & 1) != 0)
23    }
24}
25#[cfg(feature = "impl-register-debug")]
26impl core::fmt::Debug for R {
27    fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
28        f.debug_struct("RS485_CONF_SYNC")
29            .field("dl0_en", &self.dl0_en())
30            .field("dl1_en", &self.dl1_en())
31            .finish()
32    }
33}
34impl W {
35    #[doc = "Bit 1 - Set this bit to delay the stop bit by 1 bit."]
36    #[inline(always)]
37    #[must_use]
38    pub fn dl0_en(&mut self) -> DL0_EN_W<RS485_CONF_SYNC_SPEC> {
39        DL0_EN_W::new(self, 1)
40    }
41    #[doc = "Bit 2 - Set this bit to delay the stop bit by 1 bit."]
42    #[inline(always)]
43    #[must_use]
44    pub fn dl1_en(&mut self) -> DL1_EN_W<RS485_CONF_SYNC_SPEC> {
45        DL1_EN_W::new(self, 2)
46    }
47}
48#[doc = "RS485 mode configuration\n\nYou can [`read`](crate::Reg::read) this register and get [`rs485_conf_sync::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`rs485_conf_sync::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
49pub struct RS485_CONF_SYNC_SPEC;
50impl crate::RegisterSpec for RS485_CONF_SYNC_SPEC {
51    type Ux = u32;
52}
53#[doc = "`read()` method returns [`rs485_conf_sync::R`](R) reader structure"]
54impl crate::Readable for RS485_CONF_SYNC_SPEC {}
55#[doc = "`write(|w| ..)` method takes [`rs485_conf_sync::W`](W) writer structure"]
56impl crate::Writable for RS485_CONF_SYNC_SPEC {
57    type Safety = crate::Unsafe;
58    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
59    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
60}
61#[doc = "`reset()` method sets RS485_CONF_SYNC to value 0"]
62impl crate::Resettable for RS485_CONF_SYNC_SPEC {
63    const RESET_VALUE: u32 = 0;
64}
esp32c6_lp/lp_uart/rs485_conf_sync.rs

esp32c6_lp/lp_uart/
rs485_conf_sync.rs
