Module esp32c6_lp::lp_uart::int_raw

source ·
Expand description

Raw interrupt status

Structs§

Type Aliases§

  • AT_CMD_CHAR_DET_R
    Field AT_CMD_CHAR_DET reader - This interrupt raw bit turns to high level when receiver detects the configured at_cmd char.
  • AT_CMD_CHAR_DET_W
    Field AT_CMD_CHAR_DET writer - This interrupt raw bit turns to high level when receiver detects the configured at_cmd char.
  • BRK_DET_R
    Field BRK_DET reader - This interrupt raw bit turns to high level when receiver detects a 0 after the stop bit.
  • BRK_DET_W
    Field BRK_DET writer - This interrupt raw bit turns to high level when receiver detects a 0 after the stop bit.
  • CTS_CHG_R
    Field CTS_CHG reader - This interrupt raw bit turns to high level when receiver detects the edge change of CTSn signal.
  • CTS_CHG_W
    Field CTS_CHG writer - This interrupt raw bit turns to high level when receiver detects the edge change of CTSn signal.
  • DSR_CHG_R
    Field DSR_CHG reader - This interrupt raw bit turns to high level when receiver detects the edge change of DSRn signal.
  • DSR_CHG_W
    Field DSR_CHG writer - This interrupt raw bit turns to high level when receiver detects the edge change of DSRn signal.
  • FRM_ERR_R
    Field FRM_ERR reader - This interrupt raw bit turns to high level when receiver detects a data frame error .
  • FRM_ERR_W
    Field FRM_ERR writer - This interrupt raw bit turns to high level when receiver detects a data frame error .
  • GLITCH_DET_R
    Field GLITCH_DET reader - This interrupt raw bit turns to high level when receiver detects a glitch in the middle of a start bit.
  • GLITCH_DET_W
    Field GLITCH_DET writer - This interrupt raw bit turns to high level when receiver detects a glitch in the middle of a start bit.
  • PARITY_ERR_R
    Field PARITY_ERR reader - This interrupt raw bit turns to high level when receiver detects a parity error in the data.
  • PARITY_ERR_W
    Field PARITY_ERR writer - This interrupt raw bit turns to high level when receiver detects a parity error in the data.
  • R
    Register INT_RAW reader
  • RXFIFO_FULL_R
    Field RXFIFO_FULL reader - This interrupt raw bit turns to high level when receiver receives more data than what rxfifo_full_thrhd specifies.
  • RXFIFO_FULL_W
    Field RXFIFO_FULL writer - This interrupt raw bit turns to high level when receiver receives more data than what rxfifo_full_thrhd specifies.
  • RXFIFO_OVF_R
    Field RXFIFO_OVF reader - This interrupt raw bit turns to high level when receiver receives more data than the FIFO can store.
  • RXFIFO_OVF_W
    Field RXFIFO_OVF writer - This interrupt raw bit turns to high level when receiver receives more data than the FIFO can store.
  • RXFIFO_TOUT_R
    Field RXFIFO_TOUT reader - This interrupt raw bit turns to high level when receiver takes more time than rx_tout_thrhd to receive a byte.
  • RXFIFO_TOUT_W
    Field RXFIFO_TOUT writer - This interrupt raw bit turns to high level when receiver takes more time than rx_tout_thrhd to receive a byte.
  • SW_XOFF_R
    Field SW_XOFF reader - This interrupt raw bit turns to high level when receiver receives Xoff char when uart_sw_flow_con_en is set to 1.
  • SW_XOFF_W
    Field SW_XOFF writer - This interrupt raw bit turns to high level when receiver receives Xoff char when uart_sw_flow_con_en is set to 1.
  • SW_XON_R
    Field SW_XON reader - This interrupt raw bit turns to high level when receiver recevies Xon char when uart_sw_flow_con_en is set to 1.
  • SW_XON_W
    Field SW_XON writer - This interrupt raw bit turns to high level when receiver recevies Xon char when uart_sw_flow_con_en is set to 1.
  • TXFIFO_EMPTY_R
    Field TXFIFO_EMPTY reader - This interrupt raw bit turns to high level when the amount of data in Tx-FIFO is less than what txfifo_empty_thrhd specifies .
  • TXFIFO_EMPTY_W
    Field TXFIFO_EMPTY writer - This interrupt raw bit turns to high level when the amount of data in Tx-FIFO is less than what txfifo_empty_thrhd specifies .
  • TX_BRK_DONE_R
    Field TX_BRK_DONE reader - This interrupt raw bit turns to high level when transmitter completes sending NULL characters after all data in Tx-FIFO are sent.
  • TX_BRK_DONE_W
    Field TX_BRK_DONE writer - This interrupt raw bit turns to high level when transmitter completes sending NULL characters after all data in Tx-FIFO are sent.
  • TX_BRK_IDLE_DONE_R
    Field TX_BRK_IDLE_DONE reader - This interrupt raw bit turns to high level when transmitter has kept the shortest duration after sending the last data.
  • TX_BRK_IDLE_DONE_W
    Field TX_BRK_IDLE_DONE writer - This interrupt raw bit turns to high level when transmitter has kept the shortest duration after sending the last data.
  • TX_DONE_R
    Field TX_DONE reader - This interrupt raw bit turns to high level when transmitter has send out all data in FIFO.
  • TX_DONE_W
    Field TX_DONE writer - This interrupt raw bit turns to high level when transmitter has send out all data in FIFO.
  • W
    Register INT_RAW writer
  • WAKEUP_R
    Field WAKEUP reader - This interrupt raw bit turns to high level when input rxd edge changes more times than what reg_active_threshold specifies in light sleeping mode.
  • WAKEUP_W
    Field WAKEUP writer - This interrupt raw bit turns to high level when input rxd edge changes more times than what reg_active_threshold specifies in light sleeping mode.