Module esp32c6_hal::efuse

Reading of eFuses

Structs

• Efuse
• EfuseField
  The bit field for get access to efuse data

Constants

• ADC1_CAL_VOL_ATTEN0
  [] ADC1 calibration voltage at atten0
• ADC1_CAL_VOL_ATTEN1
  [] ADC1 calibration voltage at atten1
• ADC1_CAL_VOL_ATTEN2
  [] ADC1 calibration voltage at atten2
• ADC1_CAL_VOL_ATTEN3
  [] ADC1 calibration voltage at atten3
• ADC1_INIT_CODE_ATTEN0
  [] ADC1 init code at atten0
• ADC1_INIT_CODE_ATTEN0_CH0
  [] ADC1 init code at atten0 ch0
• ADC1_INIT_CODE_ATTEN0_CH1
  [] ADC1 init code at atten0 ch1
• ADC1_INIT_CODE_ATTEN0_CH2
  [] ADC1 init code at atten0 ch2
• ADC1_INIT_CODE_ATTEN0_CH3
  [] ADC1 init code at atten0 ch3
• ADC1_INIT_CODE_ATTEN0_CH4
  [] ADC1 init code at atten0 ch4
• ADC1_INIT_CODE_ATTEN0_CH5
  [] ADC1 init code at atten0 ch5
• ADC1_INIT_CODE_ATTEN0_CH6
  [] ADC1 init code at atten0 ch6
• ADC1_INIT_CODE_ATTEN1
  [] ADC1 init code at atten1
• ADC1_INIT_CODE_ATTEN2
  [] ADC1 init code at atten2
• ADC1_INIT_CODE_ATTEN3
  [] ADC1 init code at atten3
• BLK_VERSION_MAJOR
  [] BLK_VERSION_MAJOR of BLOCK2
• BLK_VERSION_MINOR
  [] BLK_VERSION_MINOR of BLOCK2
• CRYPT_DPA_ENABLE
  [] Represents whether anti-dpa attack is enabled. 1:enabled. 0: disabled
• DISABLE_BLK_VERSION_MAJOR
  [] Disables check of blk version major
• DISABLE_WAFER_VERSION_MAJOR
  [] Disables check of wafer version major
• DIS_DIRECT_BOOT
  [] Represents whether direct boot mode is disabled or enabled. 1: disabled. 0: enabled
• DIS_DOWNLOAD_ICACHE
  [] Represents whether icache is disabled or enabled in Download mode. 1: disabled. 0: enabled
• DIS_DOWNLOAD_MANUAL_ENCRYPT
  [] Represents whether flash encrypt function is disabled or enabled(except in SPI boot mode). 1: disabled. 0: enabled
• DIS_DOWNLOAD_MODE
  [] Represents whether Download mode is disabled or enabled. 1: disabled. 0: enabled
• DIS_FORCE_DOWNLOAD
  [] Represents whether the function that forces chip into download mode is disabled or enabled. 1: disabled. 0: enabled
• DIS_ICACHE
  [] Represents whether icache is disabled or enabled. 1: disabled. 0: enabled
• DIS_PAD_JTAG
  [] Represents whether JTAG is disabled in the hard way(permanently). 1: disabled. 0: enabled
• DIS_TWAI
  [DIS_CAN] Represents whether TWAI function is disabled or enabled. 1: disabled. 0: enabled
• DIS_USB_JTAG
  [] Represents whether the function of usb switch to jtag is disabled or enabled. 1: disabled. 0: enabled
• DIS_USB_SERIAL_JTAG
  [] Represents whether USB-Serial-JTAG is disabled or enabled. 1: disabled. 0: enabled
• DIS_USB_SERIAL_JTAG_DOWNLOAD_MODE
  [] Represents whether the USB-Serial-JTAG download function is disabled or enabled. 1: disabled. 0: enabled
• DIS_USB_SERIAL_JTAG_ROM_PRINT
  [DIS_USB_PRINT] Represents whether print from USB-Serial-JTAG is disabled or enabled. 1: disabled. 0: enabled
• ENABLE_SECURITY_DOWNLOAD
  [] Represents whether security download is enabled or disabled. 1: enabled. 0: disabled
• FLASH_CAP
  []
• FLASH_TEMP
  []
• FLASH_TPUW
  [] Represents the flash waiting time after power-up; in unit of ms. When the value less than 15; the waiting time is the programmed value. Otherwise; the waiting time is 2 times the programmed value
• FLASH_VENDOR
  []
• FORCE_SEND_RESUME
  [] Represents whether ROM code is forced to send a resume command during SPI boot. 1: forced. 0:not forced
• JTAG_SEL_ENABLE
  [] Represents whether the selection between usb_to_jtag and pad_to_jtag through strapping gpio15 when both EFUSE_DIS_PAD_JTAG and EFUSE_DIS_USB_JTAG are equal to 0 is enabled or disabled. 1: enabled. 0: disabled
• KEY0
  [BLOCK_KEY0] Key0 or user data
• KEY1
  [BLOCK_KEY1] Key1 or user data
• KEY2
  [BLOCK_KEY2] Key2 or user data
• KEY3
  [BLOCK_KEY3] Key3 or user data
• KEY4
  [BLOCK_KEY4] Key4 or user data
• KEY5
  [BLOCK_KEY5] Key5 or user data
• KEY_PURPOSE_0
  [KEY0_PURPOSE] Represents the purpose of Key0
• KEY_PURPOSE_1
  [KEY1_PURPOSE] Represents the purpose of Key1
• KEY_PURPOSE_2
  [KEY2_PURPOSE] Represents the purpose of Key2
• KEY_PURPOSE_3
  [KEY3_PURPOSE] Represents the purpose of Key3
• KEY_PURPOSE_4
  [KEY4_PURPOSE] Represents the purpose of Key4
• KEY_PURPOSE_5
  [KEY5_PURPOSE] Represents the purpose of Key5
• MAC_EXT
  [] Stores the extended bits of MAC address
• MAC_FACTORY
  MAC_FACTORY MAC address
• OCODE
  [] ADC OCode
• OPTIONAL_UNIQUE_ID
  [] Optional unique 128-bit ID
• PKG_VERSION
  [] Package version
• RD_DIS
  [] Disable reading from BlOCK4-10
• RD_DIS_BLOCK_KEY0
  [RD_DIS.KEY0] rd_dis of BLOCK_KEY0
• RD_DIS_BLOCK_KEY1
  [RD_DIS.KEY1] rd_dis of BLOCK_KEY1
• RD_DIS_BLOCK_KEY2
  [RD_DIS.KEY2] rd_dis of BLOCK_KEY2
• RD_DIS_BLOCK_KEY3
  [RD_DIS.KEY3] rd_dis of BLOCK_KEY3
• RD_DIS_BLOCK_KEY4
  [RD_DIS.KEY4] rd_dis of BLOCK_KEY4
• RD_DIS_BLOCK_KEY5
  [RD_DIS.KEY5] rd_dis of BLOCK_KEY5
• RD_DIS_BLOCK_SYS_DATA2
  [RD_DIS.SYS_DATA_PART2] rd_dis of BLOCK_SYS_DATA2
• SECURE_BOOT_AGGRESSIVE_REVOKE
  [] Represents whether revoking aggressive secure boot is enabled or disabled. 1: enabled. 0: disabled
• SECURE_BOOT_DISABLE_FAST_WAKE
  [] Represents whether FAST VERIFY ON WAKE is disabled or enabled when Secure Boot is enabled. 1: disabled. 0: enabled
• SECURE_BOOT_EN
  [] Represents whether secure boot is enabled or disabled. 1: enabled. 0: disabled
• SECURE_BOOT_KEY_REVOKE0
  [] Revoke 1st secure boot key
• SECURE_BOOT_KEY_REVOKE1
  [] Revoke 2nd secure boot key
• SECURE_BOOT_KEY_REVOKE2
  [] Revoke 3rd secure boot key
• SECURE_VERSION
  [] Represents the version used by ESP-IDF anti-rollback feature
• SEC_DPA_LEVEL
  [DPA_SEC_LEVEL] Represents the spa secure level by configuring the clock random divide mode
• SOFT_DIS_JTAG
  [] Represents whether JTAG is disabled in soft way. Odd number: disabled. Even number: enabled
• SPI_BOOT_CRYPT_CNT
  [] Enables flash encryption when 1 or 3 bits are set and disables otherwise {0: “Disable”; 1: “Enable”; 3: “Disable”; 7: “Enable”}
• SPI_DOWNLOAD_MSPI_DIS
  [] Represents whether SPI0 controller during boot_mode_download is disabled or enabled. 1: disabled. 0: enabled
• SWAP_UART_SDIO_EN
  [] Represents whether pad of uart and sdio is swapped or not. 1: swapped. 0: not swapped
• SYS_DATA_PART2
  [BLOCK_SYS_DATA2] System data part 2 (reserved)
• TEMP_CALIB
  [] Temperature calibration data
• UART_PRINT_CONTROL
  [] Set the default UARTboot message output mode {0: “Enable”; 1: “Enable when GPIO8 is low at reset”; 2: “Enable when GPIO8 is high at reset”; 3: “Disable”}
• USB_EXCHG_PINS
  [] Represents whether the D+ and D- pins is exchanged. 1: exchanged. 0: not exchanged
• USER_DATA
  [BLOCK_USR_DATA] User data
• USER_DATA_MAC_CUSTOM
  [MAC_CUSTOM CUSTOM_MAC] Custom MAC
• VDD_SPI_AS_GPIO
  [] Represents whether vdd spi pin is functioned as gpio. 1: functioned. 0: not functioned
• WAFER_VERSION_MAJOR
  []
• WAFER_VERSION_MINOR
  []
• WDT_DELAY_SEL
  [] Represents whether RTC watchdog timeout threshold is selected at startup. 1: selected. 0: not selected
• WR_DIS
  [] Disable programming of individual eFuses
• WR_DIS_ADC1_CAL_VOL_ATTEN0
  [] wr_dis of ADC1_CAL_VOL_ATTEN0
• WR_DIS_ADC1_CAL_VOL_ATTEN1
  [] wr_dis of ADC1_CAL_VOL_ATTEN1
• WR_DIS_ADC1_CAL_VOL_ATTEN2
  [] wr_dis of ADC1_CAL_VOL_ATTEN2
• WR_DIS_ADC1_CAL_VOL_ATTEN3
  [] wr_dis of ADC1_CAL_VOL_ATTEN3
• WR_DIS_ADC1_INIT_CODE_ATTEN0
  [] wr_dis of ADC1_INIT_CODE_ATTEN0
• WR_DIS_ADC1_INIT_CODE_ATTEN0_CH0
  [] wr_dis of ADC1_INIT_CODE_ATTEN0_CH0
• WR_DIS_ADC1_INIT_CODE_ATTEN0_CH1
  [] wr_dis of ADC1_INIT_CODE_ATTEN0_CH1
• WR_DIS_ADC1_INIT_CODE_ATTEN0_CH2
  [] wr_dis of ADC1_INIT_CODE_ATTEN0_CH2
• WR_DIS_ADC1_INIT_CODE_ATTEN0_CH3
  [] wr_dis of ADC1_INIT_CODE_ATTEN0_CH3
• WR_DIS_ADC1_INIT_CODE_ATTEN0_CH4
  [] wr_dis of ADC1_INIT_CODE_ATTEN0_CH4
• WR_DIS_ADC1_INIT_CODE_ATTEN0_CH5
  [] wr_dis of ADC1_INIT_CODE_ATTEN0_CH5
• WR_DIS_ADC1_INIT_CODE_ATTEN0_CH6
  [] wr_dis of ADC1_INIT_CODE_ATTEN0_CH6
• WR_DIS_ADC1_INIT_CODE_ATTEN1
  [] wr_dis of ADC1_INIT_CODE_ATTEN1
• WR_DIS_ADC1_INIT_CODE_ATTEN2
  [] wr_dis of ADC1_INIT_CODE_ATTEN2
• WR_DIS_ADC1_INIT_CODE_ATTEN3
  [] wr_dis of ADC1_INIT_CODE_ATTEN3
• WR_DIS_BLK1
  [] wr_dis of BLOCK1
• WR_DIS_BLK_VERSION_MAJOR
  [] wr_dis of BLK_VERSION_MAJOR
• WR_DIS_BLK_VERSION_MINOR
  [] wr_dis of BLK_VERSION_MINOR
• WR_DIS_BLOCK_KEY0
  [WR_DIS.KEY0] wr_dis of BLOCK_KEY0
• WR_DIS_BLOCK_KEY1
  [WR_DIS.KEY1] wr_dis of BLOCK_KEY1
• WR_DIS_BLOCK_KEY2
  [WR_DIS.KEY2] wr_dis of BLOCK_KEY2
• WR_DIS_BLOCK_KEY3
  [WR_DIS.KEY3] wr_dis of BLOCK_KEY3
• WR_DIS_BLOCK_KEY4
  [WR_DIS.KEY4] wr_dis of BLOCK_KEY4
• WR_DIS_BLOCK_KEY5
  [WR_DIS.KEY5] wr_dis of BLOCK_KEY5
• WR_DIS_BLOCK_SYS_DATA2
  [WR_DIS.SYS_DATA_PART2] wr_dis of BLOCK_SYS_DATA2
• WR_DIS_BLOCK_USR_DATA
  [WR_DIS.USER_DATA] wr_dis of BLOCK_USR_DATA
• WR_DIS_CRYPT_DPA_ENABLE
  [] wr_dis of CRYPT_DPA_ENABLE
• WR_DIS_CUSTOM_MAC
  [WR_DIS.MAC_CUSTOM WR_DIS.USER_DATA_MAC_CUSTOM] wr_dis of CUSTOM_MAC
• WR_DIS_DISABLE_BLK_VERSION_MAJOR
  [] wr_dis of DISABLE_BLK_VERSION_MAJOR
• WR_DIS_DISABLE_WAFER_VERSION_MAJOR
  [] wr_dis of DISABLE_WAFER_VERSION_MAJOR
• WR_DIS_DIS_DIRECT_BOOT
  [] wr_dis of DIS_DIRECT_BOOT
• WR_DIS_DIS_DOWNLOAD_ICACHE
  [] wr_dis of DIS_DOWNLOAD_ICACHE
• WR_DIS_DIS_DOWNLOAD_MANUAL_ENCRYPT
  [] wr_dis of DIS_DOWNLOAD_MANUAL_ENCRYPT
• WR_DIS_DIS_DOWNLOAD_MODE
  [] wr_dis of DIS_DOWNLOAD_MODE
• WR_DIS_DIS_FORCE_DOWNLOAD
  [] wr_dis of DIS_FORCE_DOWNLOAD
• WR_DIS_DIS_ICACHE
  [] wr_dis of DIS_ICACHE
• WR_DIS_DIS_PAD_JTAG
  [] wr_dis of DIS_PAD_JTAG
• WR_DIS_DIS_TWAI
  [WR_DIS.DIS_CAN] wr_dis of DIS_TWAI
• WR_DIS_DIS_USB_JTAG
  [] wr_dis of DIS_USB_JTAG
• WR_DIS_DIS_USB_SERIAL_JTAG
  [] wr_dis of DIS_USB_SERIAL_JTAG
• WR_DIS_DIS_USB_SERIAL_JTAG_DOWNLOAD_MODE
  [] wr_dis of DIS_USB_SERIAL_JTAG_DOWNLOAD_MODE
• WR_DIS_DIS_USB_SERIAL_JTAG_ROM_PRINT
  [WR_DIS.DIS_USB_PRINT] wr_dis of DIS_USB_SERIAL_JTAG_ROM_PRINT
• WR_DIS_ENABLE_SECURITY_DOWNLOAD
  [] wr_dis of ENABLE_SECURITY_DOWNLOAD
• WR_DIS_FLASH_CAP
  [] wr_dis of FLASH_CAP
• WR_DIS_FLASH_TEMP
  [] wr_dis of FLASH_TEMP
• WR_DIS_FLASH_TPUW
  [] wr_dis of FLASH_TPUW
• WR_DIS_FLASH_VENDOR
  [] wr_dis of FLASH_VENDOR
• WR_DIS_FORCE_SEND_RESUME
  [] wr_dis of FORCE_SEND_RESUME
• WR_DIS_JTAG_SEL_ENABLE
  [] wr_dis of JTAG_SEL_ENABLE
• WR_DIS_KEY_PURPOSE_0
  [WR_DIS.KEY0_PURPOSE] wr_dis of KEY_PURPOSE_0
• WR_DIS_KEY_PURPOSE_1
  [WR_DIS.KEY1_PURPOSE] wr_dis of KEY_PURPOSE_1
• WR_DIS_KEY_PURPOSE_2
  [WR_DIS.KEY2_PURPOSE] wr_dis of KEY_PURPOSE_2
• WR_DIS_KEY_PURPOSE_3
  [WR_DIS.KEY3_PURPOSE] wr_dis of KEY_PURPOSE_3
• WR_DIS_KEY_PURPOSE_4
  [WR_DIS.KEY4_PURPOSE] wr_dis of KEY_PURPOSE_4
• WR_DIS_KEY_PURPOSE_5
  [WR_DIS.KEY5_PURPOSE] wr_dis of KEY_PURPOSE_5
• WR_DIS_MAC
  [WR_DIS.MAC_FACTORY] wr_dis of MAC
• WR_DIS_MAC_EXT
  [] wr_dis of MAC_EXT
• WR_DIS_OCODE
  [] wr_dis of OCODE
• WR_DIS_OPTIONAL_UNIQUE_ID
  [] wr_dis of OPTIONAL_UNIQUE_ID
• WR_DIS_PKG_VERSION
  [] wr_dis of PKG_VERSION
• WR_DIS_RD_DIS
  [] wr_dis of RD_DIS
• WR_DIS_SECURE_BOOT_AGGRESSIVE_REVOKE
  [] wr_dis of SECURE_BOOT_AGGRESSIVE_REVOKE
• WR_DIS_SECURE_BOOT_DISABLE_FAST_WAKE
  [] wr_dis of SECURE_BOOT_DISABLE_FAST_WAKE
• WR_DIS_SECURE_BOOT_EN
  [] wr_dis of SECURE_BOOT_EN
• WR_DIS_SECURE_BOOT_KEY_REVOKE0
  [] wr_dis of SECURE_BOOT_KEY_REVOKE0
• WR_DIS_SECURE_BOOT_KEY_REVOKE1
  [] wr_dis of SECURE_BOOT_KEY_REVOKE1
• WR_DIS_SECURE_BOOT_KEY_REVOKE2
  [] wr_dis of SECURE_BOOT_KEY_REVOKE2
• WR_DIS_SECURE_VERSION
  [] wr_dis of SECURE_VERSION
• WR_DIS_SEC_DPA_LEVEL
  [WR_DIS.DPA_SEC_LEVEL] wr_dis of SEC_DPA_LEVEL
• WR_DIS_SOFT_DIS_JTAG
  [] wr_dis of SOFT_DIS_JTAG
• WR_DIS_SPI_BOOT_CRYPT_CNT
  [] wr_dis of SPI_BOOT_CRYPT_CNT
• WR_DIS_SPI_DOWNLOAD_MSPI_DIS
  [] wr_dis of SPI_DOWNLOAD_MSPI_DIS
• WR_DIS_SWAP_UART_SDIO_EN
  [] wr_dis of SWAP_UART_SDIO_EN
• WR_DIS_SYS_DATA_PART1
  [] wr_dis of BLOCK2
• WR_DIS_TEMP_CALIB
  [] wr_dis of TEMP_CALIB
• WR_DIS_UART_PRINT_CONTROL
  [] wr_dis of UART_PRINT_CONTROL
• WR_DIS_USB_EXCHG_PINS
  [] wr_dis of USB_EXCHG_PINS
• WR_DIS_VDD_SPI_AS_GPIO
  [] wr_dis of VDD_SPI_AS_GPIO
• WR_DIS_WAFER_VERSION_MAJOR
  [] wr_dis of WAFER_VERSION_MAJOR
• WR_DIS_WAFER_VERSION_MINOR
  [] wr_dis of WAFER_VERSION_MINOR
• WR_DIS_WDT_DELAY_SEL
  [] wr_dis of WDT_DELAY_SEL