#[doc = "Register `DIN_MODE` reader"]
pub type R = crate::R<DIN_MODE_SPEC>;
#[doc = "Register `DIN_MODE` writer"]
pub type W = crate::W<DIN_MODE_SPEC>;
#[doc = "Field `DIN0_MODE` reader - the input signals are delayed by system clock cycles, 0: input without delayed, 1: input with the posedge of clk_apb,2 input with the negedge of clk_apb, 3: input with the posedge of clk_160, 4 input with the negedge of clk_160, 5: input with the spi_clk high edge, 6: input with the spi_clk low edge"]
pub type DIN0_MODE_R = crate::FieldReader;
#[doc = "Field `DIN0_MODE` writer - the input signals are delayed by system clock cycles, 0: input without delayed, 1: input with the posedge of clk_apb,2 input with the negedge of clk_apb, 3: input with the posedge of clk_160, 4 input with the negedge of clk_160, 5: input with the spi_clk high edge, 6: input with the spi_clk low edge"]
pub type DIN0_MODE_W<'a, REG> = crate::FieldWriter<'a, REG, 2>;
#[doc = "Field `DIN1_MODE` reader - the input signals are delayed by system clock cycles, 0: input without delayed, 1: input with the posedge of clk_apb,2 input with the negedge of clk_apb, 3: input with the posedge of clk_160, 4 input with the negedge of clk_160, 5: input with the spi_clk high edge, 6: input with the spi_clk low edge"]
pub type DIN1_MODE_R = crate::FieldReader;
#[doc = "Field `DIN1_MODE` writer - the input signals are delayed by system clock cycles, 0: input without delayed, 1: input with the posedge of clk_apb,2 input with the negedge of clk_apb, 3: input with the posedge of clk_160, 4 input with the negedge of clk_160, 5: input with the spi_clk high edge, 6: input with the spi_clk low edge"]
pub type DIN1_MODE_W<'a, REG> = crate::FieldWriter<'a, REG, 2>;
#[doc = "Field `DIN2_MODE` reader - the input signals are delayed by system clock cycles, 0: input without delayed, 1: input with the posedge of clk_apb,2 input with the negedge of clk_apb, 3: input with the posedge of clk_160, 4 input with the negedge of clk_160, 5: input with the spi_clk high edge, 6: input with the spi_clk low edge"]
pub type DIN2_MODE_R = crate::FieldReader;
#[doc = "Field `DIN2_MODE` writer - the input signals are delayed by system clock cycles, 0: input without delayed, 1: input with the posedge of clk_apb,2 input with the negedge of clk_apb, 3: input with the posedge of clk_160, 4 input with the negedge of clk_160, 5: input with the spi_clk high edge, 6: input with the spi_clk low edge"]
pub type DIN2_MODE_W<'a, REG> = crate::FieldWriter<'a, REG, 2>;
#[doc = "Field `DIN3_MODE` reader - the input signals are delayed by system clock cycles, 0: input without delayed, 1: input with the posedge of clk_apb,2 input with the negedge of clk_apb, 3: input with the posedge of clk_160, 4 input with the negedge of clk_160, 5: input with the spi_clk high edge, 6: input with the spi_clk low edge"]
pub type DIN3_MODE_R = crate::FieldReader;
#[doc = "Field `DIN3_MODE` writer - the input signals are delayed by system clock cycles, 0: input without delayed, 1: input with the posedge of clk_apb,2 input with the negedge of clk_apb, 3: input with the posedge of clk_160, 4 input with the negedge of clk_160, 5: input with the spi_clk high edge, 6: input with the spi_clk low edge"]
pub type DIN3_MODE_W<'a, REG> = crate::FieldWriter<'a, REG, 2>;
impl R {
#[doc = "Bits 0:1 - the input signals are delayed by system clock cycles, 0: input without delayed, 1: input with the posedge of clk_apb,2 input with the negedge of clk_apb, 3: input with the posedge of clk_160, 4 input with the negedge of clk_160, 5: input with the spi_clk high edge, 6: input with the spi_clk low edge"]
#[inline(always)]
pub fn din0_mode(&self) -> DIN0_MODE_R {
DIN0_MODE_R::new((self.bits & 3) as u8)
}
#[doc = "Bits 2:3 - the input signals are delayed by system clock cycles, 0: input without delayed, 1: input with the posedge of clk_apb,2 input with the negedge of clk_apb, 3: input with the posedge of clk_160, 4 input with the negedge of clk_160, 5: input with the spi_clk high edge, 6: input with the spi_clk low edge"]
#[inline(always)]
pub fn din1_mode(&self) -> DIN1_MODE_R {
DIN1_MODE_R::new(((self.bits >> 2) & 3) as u8)
}
#[doc = "Bits 4:5 - the input signals are delayed by system clock cycles, 0: input without delayed, 1: input with the posedge of clk_apb,2 input with the negedge of clk_apb, 3: input with the posedge of clk_160, 4 input with the negedge of clk_160, 5: input with the spi_clk high edge, 6: input with the spi_clk low edge"]
#[inline(always)]
pub fn din2_mode(&self) -> DIN2_MODE_R {
DIN2_MODE_R::new(((self.bits >> 4) & 3) as u8)
}
#[doc = "Bits 6:7 - the input signals are delayed by system clock cycles, 0: input without delayed, 1: input with the posedge of clk_apb,2 input with the negedge of clk_apb, 3: input with the posedge of clk_160, 4 input with the negedge of clk_160, 5: input with the spi_clk high edge, 6: input with the spi_clk low edge"]
#[inline(always)]
pub fn din3_mode(&self) -> DIN3_MODE_R {
DIN3_MODE_R::new(((self.bits >> 6) & 3) as u8)
}
}
#[cfg(feature = "impl-register-debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
f.debug_struct("DIN_MODE")
.field("din0_mode", &self.din0_mode())
.field("din1_mode", &self.din1_mode())
.field("din2_mode", &self.din2_mode())
.field("din3_mode", &self.din3_mode())
.finish()
}
}
impl W {
#[doc = "Bits 0:1 - the input signals are delayed by system clock cycles, 0: input without delayed, 1: input with the posedge of clk_apb,2 input with the negedge of clk_apb, 3: input with the posedge of clk_160, 4 input with the negedge of clk_160, 5: input with the spi_clk high edge, 6: input with the spi_clk low edge"]
#[inline(always)]
#[must_use]
pub fn din0_mode(&mut self) -> DIN0_MODE_W<DIN_MODE_SPEC> {
DIN0_MODE_W::new(self, 0)
}
#[doc = "Bits 2:3 - the input signals are delayed by system clock cycles, 0: input without delayed, 1: input with the posedge of clk_apb,2 input with the negedge of clk_apb, 3: input with the posedge of clk_160, 4 input with the negedge of clk_160, 5: input with the spi_clk high edge, 6: input with the spi_clk low edge"]
#[inline(always)]
#[must_use]
pub fn din1_mode(&mut self) -> DIN1_MODE_W<DIN_MODE_SPEC> {
DIN1_MODE_W::new(self, 2)
}
#[doc = "Bits 4:5 - the input signals are delayed by system clock cycles, 0: input without delayed, 1: input with the posedge of clk_apb,2 input with the negedge of clk_apb, 3: input with the posedge of clk_160, 4 input with the negedge of clk_160, 5: input with the spi_clk high edge, 6: input with the spi_clk low edge"]
#[inline(always)]
#[must_use]
pub fn din2_mode(&mut self) -> DIN2_MODE_W<DIN_MODE_SPEC> {
DIN2_MODE_W::new(self, 4)
}
#[doc = "Bits 6:7 - the input signals are delayed by system clock cycles, 0: input without delayed, 1: input with the posedge of clk_apb,2 input with the negedge of clk_apb, 3: input with the posedge of clk_160, 4 input with the negedge of clk_160, 5: input with the spi_clk high edge, 6: input with the spi_clk low edge"]
#[inline(always)]
#[must_use]
pub fn din3_mode(&mut self) -> DIN3_MODE_W<DIN_MODE_SPEC> {
DIN3_MODE_W::new(self, 6)
}
}
#[doc = "SPI0 input delay mode control register\n\nYou can [`read`](crate::Reg::read) this register and get [`din_mode::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`din_mode::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
pub struct DIN_MODE_SPEC;
impl crate::RegisterSpec for DIN_MODE_SPEC {
type Ux = u32;
}
#[doc = "`read()` method returns [`din_mode::R`](R) reader structure"]
impl crate::Readable for DIN_MODE_SPEC {}
#[doc = "`write(|w| ..)` method takes [`din_mode::W`](W) writer structure"]
impl crate::Writable for DIN_MODE_SPEC {
type Safety = crate::Unsafe;
const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
}
#[doc = "`reset()` method sets DIN_MODE to value 0"]
impl crate::Resettable for DIN_MODE_SPEC {
const RESET_VALUE: u32 = 0;
}