Module esp32c3::spi0::misc

SPI0 misc register

Structs

• MISC_SPEC
  SPI0 misc register

Type Aliases

• CK_IDLE_EDGE_R
  Field CK_IDLE_EDGE reader - 1: spi clk line is high when idle 0: spi clk line is low when idle
• CK_IDLE_EDGE_W
  Field CK_IDLE_EDGE writer - 1: spi clk line is high when idle 0: spi clk line is low when idle
• CSPI_ST_TRANS_END_INT_ENA_R
  Field CSPI_ST_TRANS_END_INT_ENA reader - The bit is used to enable the interrupt of spi0_slv_st controlled transmitting is done.
• CSPI_ST_TRANS_END_INT_ENA_W
  Field CSPI_ST_TRANS_END_INT_ENA writer - The bit is used to enable the interrupt of spi0_slv_st controlled transmitting is done.
• CSPI_ST_TRANS_END_R
  Field CSPI_ST_TRANS_END reader - The bit is used to indicate the spi0_slv_st controlled transmitting is done.
• CSPI_ST_TRANS_END_W
  Field CSPI_ST_TRANS_END writer - The bit is used to indicate the spi0_slv_st controlled transmitting is done.
• CS_KEEP_ACTIVE_R
  Field CS_KEEP_ACTIVE reader - spi cs line keep low when the bit is set.
• CS_KEEP_ACTIVE_W
  Field CS_KEEP_ACTIVE writer - spi cs line keep low when the bit is set.
• R
  Register MISC reader
• TRANS_END_INT_ENA_R
  Field TRANS_END_INT_ENA reader - The bit is used to enable the interrupt of spi0_mst_st controlled transmitting is done.
• TRANS_END_INT_ENA_W
  Field TRANS_END_INT_ENA writer - The bit is used to enable the interrupt of spi0_mst_st controlled transmitting is done.
• TRANS_END_R
  Field TRANS_END reader - The bit is used to indicate the spi0_mst_st controlled transmitting is done.
• TRANS_END_W
  Field TRANS_END writer - The bit is used to indicate the spi0_mst_st controlled transmitting is done.
• W
  Register MISC writer