esp32c3/
dma.rs

1#[repr(C)]
2#[cfg_attr(feature = "impl-register-debug", derive(Debug))]
3#[doc = "Register block"]
4pub struct RegisterBlock {
5    int_ch: [INT_CH; 3],
6    _reserved1: [u8; 0x10],
7    ahb_test: AHB_TEST,
8    misc_conf: MISC_CONF,
9    date: DATE,
10    _reserved4: [u8; 0x24],
11    ch: [CH; 3],
12}
13impl RegisterBlock {
14    #[doc = "0x00..0x30 - Cluster INT_CH%s, containing INT_RAW_CH?, INT_ST_CH?, INT_ENA_CH?, INT_CLR_CH?"]
15    #[inline(always)]
16    pub const fn int_ch(&self, n: usize) -> &INT_CH {
17        &self.int_ch[n]
18    }
19    #[doc = "Iterator for array of:"]
20    #[doc = "0x00..0x30 - Cluster INT_CH%s, containing INT_RAW_CH?, INT_ST_CH?, INT_ENA_CH?, INT_CLR_CH?"]
21    #[inline(always)]
22    pub fn int_ch_iter(&self) -> impl Iterator<Item = &INT_CH> {
23        self.int_ch.iter()
24    }
25    #[doc = "0x40 - DMA_AHB_TEST_REG."]
26    #[inline(always)]
27    pub const fn ahb_test(&self) -> &AHB_TEST {
28        &self.ahb_test
29    }
30    #[doc = "0x44 - DMA_MISC_CONF_REG."]
31    #[inline(always)]
32    pub const fn misc_conf(&self) -> &MISC_CONF {
33        &self.misc_conf
34    }
35    #[doc = "0x48 - DMA_DATE_REG."]
36    #[inline(always)]
37    pub const fn date(&self) -> &DATE {
38        &self.date
39    }
40    #[doc = "0x70..0x2b0 - Cluster CH%s, containing IN_CONF0_CH?, IN_CONF1_CH?, INFIFO_STATUS_CH?, IN_POP_CH?, IN_LINK_CH?, IN_STATE_CH?, IN_SUC_EOF_DES_ADDR_CH?, IN_ERR_EOF_DES_ADDR_CH?, IN_DSCR_CH?, IN_DSCR_BF0_CH?, IN_DSCR_BF1_CH?, IN_PRI_CH?, IN_PERI_SEL_CH?, OUT_CONF0_CH?, OUT_CONF1_CH?, OUTFIFO_STATUS_CH?, OUT_PUSH_CH?, OUT_LINK_CH?, OUT_STATE_CH?, OUT_EOF_DES_ADDR_CH?, OUT_EOF_BFR_DES_ADDR_CH?, OUT_DSCR_CH?, OUT_DSCR_BF0_CH?, OUT_DSCR_BF1_CH?, OUT_PRI_CH?, OUT_PERI_SEL_CH?"]
41    #[inline(always)]
42    pub const fn ch(&self, n: usize) -> &CH {
43        &self.ch[n]
44    }
45    #[doc = "Iterator for array of:"]
46    #[doc = "0x70..0x2b0 - Cluster CH%s, containing IN_CONF0_CH?, IN_CONF1_CH?, INFIFO_STATUS_CH?, IN_POP_CH?, IN_LINK_CH?, IN_STATE_CH?, IN_SUC_EOF_DES_ADDR_CH?, IN_ERR_EOF_DES_ADDR_CH?, IN_DSCR_CH?, IN_DSCR_BF0_CH?, IN_DSCR_BF1_CH?, IN_PRI_CH?, IN_PERI_SEL_CH?, OUT_CONF0_CH?, OUT_CONF1_CH?, OUTFIFO_STATUS_CH?, OUT_PUSH_CH?, OUT_LINK_CH?, OUT_STATE_CH?, OUT_EOF_DES_ADDR_CH?, OUT_EOF_BFR_DES_ADDR_CH?, OUT_DSCR_CH?, OUT_DSCR_BF0_CH?, OUT_DSCR_BF1_CH?, OUT_PRI_CH?, OUT_PERI_SEL_CH?"]
47    #[inline(always)]
48    pub fn ch_iter(&self) -> impl Iterator<Item = &CH> {
49        self.ch.iter()
50    }
51}
52#[doc = "Cluster INT_CH%s, containing INT_RAW_CH?, INT_ST_CH?, INT_ENA_CH?, INT_CLR_CH?"]
53pub use self::int_ch::INT_CH;
54#[doc = r"Cluster"]
55#[doc = "Cluster INT_CH%s, containing INT_RAW_CH?, INT_ST_CH?, INT_ENA_CH?, INT_CLR_CH?"]
56pub mod int_ch;
57#[doc = "AHB_TEST (rw) register accessor: DMA_AHB_TEST_REG.\n\nYou can [`read`](crate::Reg::read) this register and get [`ahb_test::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`ahb_test::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ahb_test`] module"]
58pub type AHB_TEST = crate::Reg<ahb_test::AHB_TEST_SPEC>;
59#[doc = "DMA_AHB_TEST_REG."]
60pub mod ahb_test;
61#[doc = "MISC_CONF (rw) register accessor: DMA_MISC_CONF_REG.\n\nYou can [`read`](crate::Reg::read) this register and get [`misc_conf::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`misc_conf::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@misc_conf`] module"]
62pub type MISC_CONF = crate::Reg<misc_conf::MISC_CONF_SPEC>;
63#[doc = "DMA_MISC_CONF_REG."]
64pub mod misc_conf;
65#[doc = "DATE (rw) register accessor: DMA_DATE_REG.\n\nYou can [`read`](crate::Reg::read) this register and get [`date::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`date::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@date`] module"]
66pub type DATE = crate::Reg<date::DATE_SPEC>;
67#[doc = "DMA_DATE_REG."]
68pub mod date;
69#[doc = "Cluster CH%s, containing IN_CONF0_CH?, IN_CONF1_CH?, INFIFO_STATUS_CH?, IN_POP_CH?, IN_LINK_CH?, IN_STATE_CH?, IN_SUC_EOF_DES_ADDR_CH?, IN_ERR_EOF_DES_ADDR_CH?, IN_DSCR_CH?, IN_DSCR_BF0_CH?, IN_DSCR_BF1_CH?, IN_PRI_CH?, IN_PERI_SEL_CH?, OUT_CONF0_CH?, OUT_CONF1_CH?, OUTFIFO_STATUS_CH?, OUT_PUSH_CH?, OUT_LINK_CH?, OUT_STATE_CH?, OUT_EOF_DES_ADDR_CH?, OUT_EOF_BFR_DES_ADDR_CH?, OUT_DSCR_CH?, OUT_DSCR_BF0_CH?, OUT_DSCR_BF1_CH?, OUT_PRI_CH?, OUT_PERI_SEL_CH?"]
70pub use self::ch::CH;
71#[doc = r"Cluster"]
72#[doc = "Cluster CH%s, containing IN_CONF0_CH?, IN_CONF1_CH?, INFIFO_STATUS_CH?, IN_POP_CH?, IN_LINK_CH?, IN_STATE_CH?, IN_SUC_EOF_DES_ADDR_CH?, IN_ERR_EOF_DES_ADDR_CH?, IN_DSCR_CH?, IN_DSCR_BF0_CH?, IN_DSCR_BF1_CH?, IN_PRI_CH?, IN_PERI_SEL_CH?, OUT_CONF0_CH?, OUT_CONF1_CH?, OUTFIFO_STATUS_CH?, OUT_PUSH_CH?, OUT_LINK_CH?, OUT_STATE_CH?, OUT_EOF_DES_ADDR_CH?, OUT_EOF_BFR_DES_ADDR_CH?, OUT_DSCR_CH?, OUT_DSCR_BF0_CH?, OUT_DSCR_BF1_CH?, OUT_PRI_CH?, OUT_PERI_SEL_CH?"]
73pub mod ch;
esp32c3/dma.rs

esp32c3/
dma.rs
