#[repr(C)]
#[cfg_attr(feature = "impl-register-debug", derive(Debug))]
#[doc = "Register block"]
pub struct RegisterBlock {
chdata: [CHDATA; 4],
ch_tx_conf0: [CH_TX_CONF0; 2],
ch_rx_conf0: (),
_reserved3: [u8; 0x04],
ch_rx_conf1: (),
_reserved4: [u8; 0x0c],
ch_tx_status: [CH_TX_STATUS; 2],
ch_rx_status: [CH_RX_STATUS; 2],
int_raw: INT_RAW,
int_st: INT_ST,
int_ena: INT_ENA,
int_clr: INT_CLR,
chcarrier_duty: [CHCARRIER_DUTY; 2],
ch_rx_carrier_rm: [CH_RX_CARRIER_RM; 2],
ch_tx_lim: [CH_TX_LIM; 2],
ch_rx_lim: [CH_RX_LIM; 2],
sys_conf: SYS_CONF,
tx_sim: TX_SIM,
ref_cnt_rst: REF_CNT_RST,
_reserved17: [u8; 0x58],
date: DATE,
}
impl RegisterBlock {
#[doc = "0x00..0x10 - RMT_CH%sDATA_REG."]
#[inline(always)]
pub const fn chdata(&self, n: usize) -> &CHDATA {
&self.chdata[n]
}
#[doc = "Iterator for array of:"]
#[doc = "0x00..0x10 - RMT_CH%sDATA_REG."]
#[inline(always)]
pub fn chdata_iter(&self) -> impl Iterator<Item = &CHDATA> {
self.chdata.iter()
}
#[doc = "0x00 - RMT_CH0DATA_REG."]
#[inline(always)]
pub const fn ch0data(&self) -> &CHDATA {
self.chdata(0)
}
#[doc = "0x04 - RMT_CH1DATA_REG."]
#[inline(always)]
pub const fn ch1data(&self) -> &CHDATA {
self.chdata(1)
}
#[doc = "0x08 - RMT_CH2DATA_REG."]
#[inline(always)]
pub const fn ch2data(&self) -> &CHDATA {
self.chdata(2)
}
#[doc = "0x0c - RMT_CH3DATA_REG."]
#[inline(always)]
pub const fn ch3data(&self) -> &CHDATA {
self.chdata(3)
}
#[doc = "0x10..0x18 - RMT_CH%sCONF%s_REG."]
#[inline(always)]
pub const fn ch_tx_conf0(&self, n: usize) -> &CH_TX_CONF0 {
&self.ch_tx_conf0[n]
}
#[doc = "Iterator for array of:"]
#[doc = "0x10..0x18 - RMT_CH%sCONF%s_REG."]
#[inline(always)]
pub fn ch_tx_conf0_iter(&self) -> impl Iterator<Item = &CH_TX_CONF0> {
self.ch_tx_conf0.iter()
}
#[doc = "0x10 - RMT_CH0CONF0_REG."]
#[inline(always)]
pub const fn ch0_tx_conf0(&self) -> &CH_TX_CONF0 {
self.ch_tx_conf0(0)
}
#[doc = "0x14 - RMT_CH1CONF1_REG."]
#[inline(always)]
pub const fn ch1_tx_conf0(&self) -> &CH_TX_CONF0 {
self.ch_tx_conf0(1)
}
#[doc = "0x18..0x20 - RMT_CH2CONF0_REG."]
#[doc = ""]
#[doc = "<div class=\"warning\">`n` is the index of register in the array. `n == 0` corresponds to `CH2_RX_CONF0` register.</div>"]
#[inline(always)]
pub const fn ch_rx_conf0(&self, n: usize) -> &CH_RX_CONF0 {
#[allow(clippy::no_effect)]
[(); 2][n];
unsafe {
&*core::ptr::from_ref(self)
.cast::<u8>()
.add(24)
.add(8 * n)
.cast()
}
}
#[doc = "Iterator for array of:"]
#[doc = "0x18..0x20 - RMT_CH2CONF0_REG."]
#[inline(always)]
pub fn ch_rx_conf0_iter(&self) -> impl Iterator<Item = &CH_RX_CONF0> {
(0..2).map(move |n| unsafe {
&*core::ptr::from_ref(self)
.cast::<u8>()
.add(24)
.add(8 * n)
.cast()
})
}
#[doc = "0x18 - RMT_CH2CONF0_REG."]
#[inline(always)]
pub const fn ch2_rx_conf0(&self) -> &CH_RX_CONF0 {
self.ch_rx_conf0(0)
}
#[doc = "0x20 - RMT_CH2CONF0_REG."]
#[inline(always)]
pub const fn ch3_rx_conf0(&self) -> &CH_RX_CONF0 {
self.ch_rx_conf0(1)
}
#[doc = "0x1c..0x24 - RMT_CH2CONF1_REG."]
#[doc = ""]
#[doc = "<div class=\"warning\">`n` is the index of register in the array. `n == 0` corresponds to `CH2_RX_CONF1` register.</div>"]
#[inline(always)]
pub const fn ch_rx_conf1(&self, n: usize) -> &CH_RX_CONF1 {
#[allow(clippy::no_effect)]
[(); 2][n];
unsafe {
&*core::ptr::from_ref(self)
.cast::<u8>()
.add(28)
.add(8 * n)
.cast()
}
}
#[doc = "Iterator for array of:"]
#[doc = "0x1c..0x24 - RMT_CH2CONF1_REG."]
#[inline(always)]
pub fn ch_rx_conf1_iter(&self) -> impl Iterator<Item = &CH_RX_CONF1> {
(0..2).map(move |n| unsafe {
&*core::ptr::from_ref(self)
.cast::<u8>()
.add(28)
.add(8 * n)
.cast()
})
}
#[doc = "0x1c - RMT_CH2CONF1_REG."]
#[inline(always)]
pub const fn ch2_rx_conf1(&self) -> &CH_RX_CONF1 {
self.ch_rx_conf1(0)
}
#[doc = "0x24 - RMT_CH2CONF1_REG."]
#[inline(always)]
pub const fn ch3_rx_conf1(&self) -> &CH_RX_CONF1 {
self.ch_rx_conf1(1)
}
#[doc = "0x28..0x30 - RMT_CH%sSTATUS_REG."]
#[inline(always)]
pub const fn ch_tx_status(&self, n: usize) -> &CH_TX_STATUS {
&self.ch_tx_status[n]
}
#[doc = "Iterator for array of:"]
#[doc = "0x28..0x30 - RMT_CH%sSTATUS_REG."]
#[inline(always)]
pub fn ch_tx_status_iter(&self) -> impl Iterator<Item = &CH_TX_STATUS> {
self.ch_tx_status.iter()
}
#[doc = "0x28 - RMT_CH0STATUS_REG."]
#[inline(always)]
pub const fn ch0_tx_status(&self) -> &CH_TX_STATUS {
self.ch_tx_status(0)
}
#[doc = "0x2c - RMT_CH1STATUS_REG."]
#[inline(always)]
pub const fn ch1_tx_status(&self) -> &CH_TX_STATUS {
self.ch_tx_status(1)
}
#[doc = "0x30..0x38 - RMT_CH2STATUS_REG."]
#[doc = ""]
#[doc = "<div class=\"warning\">`n` is the index of register in the array. `n == 0` corresponds to `CH2_RX_STATUS` register.</div>"]
#[inline(always)]
pub const fn ch_rx_status(&self, n: usize) -> &CH_RX_STATUS {
&self.ch_rx_status[n]
}
#[doc = "Iterator for array of:"]
#[doc = "0x30..0x38 - RMT_CH2STATUS_REG."]
#[inline(always)]
pub fn ch_rx_status_iter(&self) -> impl Iterator<Item = &CH_RX_STATUS> {
self.ch_rx_status.iter()
}
#[doc = "0x30 - RMT_CH2STATUS_REG."]
#[inline(always)]
pub const fn ch2_rx_status(&self) -> &CH_RX_STATUS {
self.ch_rx_status(0)
}
#[doc = "0x34 - RMT_CH2STATUS_REG."]
#[inline(always)]
pub const fn ch3_rx_status(&self) -> &CH_RX_STATUS {
self.ch_rx_status(1)
}
#[doc = "0x38 - RMT_INT_RAW_REG."]
#[inline(always)]
pub const fn int_raw(&self) -> &INT_RAW {
&self.int_raw
}
#[doc = "0x3c - RMT_INT_ST_REG."]
#[inline(always)]
pub const fn int_st(&self) -> &INT_ST {
&self.int_st
}
#[doc = "0x40 - RMT_INT_ENA_REG."]
#[inline(always)]
pub const fn int_ena(&self) -> &INT_ENA {
&self.int_ena
}
#[doc = "0x44 - RMT_INT_CLR_REG."]
#[inline(always)]
pub const fn int_clr(&self) -> &INT_CLR {
&self.int_clr
}
#[doc = "0x48..0x50 - RMT_CH%sCARRIER_DUTY_REG."]
#[inline(always)]
pub const fn chcarrier_duty(&self, n: usize) -> &CHCARRIER_DUTY {
&self.chcarrier_duty[n]
}
#[doc = "Iterator for array of:"]
#[doc = "0x48..0x50 - RMT_CH%sCARRIER_DUTY_REG."]
#[inline(always)]
pub fn chcarrier_duty_iter(&self) -> impl Iterator<Item = &CHCARRIER_DUTY> {
self.chcarrier_duty.iter()
}
#[doc = "0x48 - RMT_CH0CARRIER_DUTY_REG."]
#[inline(always)]
pub const fn ch0carrier_duty(&self) -> &CHCARRIER_DUTY {
self.chcarrier_duty(0)
}
#[doc = "0x4c - RMT_CH1CARRIER_DUTY_REG."]
#[inline(always)]
pub const fn ch1carrier_duty(&self) -> &CHCARRIER_DUTY {
self.chcarrier_duty(1)
}
#[doc = "0x50..0x58 - RMT_CH2_RX_CARRIER_RM_REG."]
#[doc = ""]
#[doc = "<div class=\"warning\">`n` is the index of register in the array. `n == 0` corresponds to `CH2_RX_CARRIER_RM` register.</div>"]
#[inline(always)]
pub const fn ch_rx_carrier_rm(&self, n: usize) -> &CH_RX_CARRIER_RM {
&self.ch_rx_carrier_rm[n]
}
#[doc = "Iterator for array of:"]
#[doc = "0x50..0x58 - RMT_CH2_RX_CARRIER_RM_REG."]
#[inline(always)]
pub fn ch_rx_carrier_rm_iter(&self) -> impl Iterator<Item = &CH_RX_CARRIER_RM> {
self.ch_rx_carrier_rm.iter()
}
#[doc = "0x50 - RMT_CH2_RX_CARRIER_RM_REG."]
#[inline(always)]
pub const fn ch2_rx_carrier_rm(&self) -> &CH_RX_CARRIER_RM {
self.ch_rx_carrier_rm(0)
}
#[doc = "0x54 - RMT_CH2_RX_CARRIER_RM_REG."]
#[inline(always)]
pub const fn ch3_rx_carrier_rm(&self) -> &CH_RX_CARRIER_RM {
self.ch_rx_carrier_rm(1)
}
#[doc = "0x58..0x60 - RMT_CH%s_TX_LIM_REG."]
#[inline(always)]
pub const fn ch_tx_lim(&self, n: usize) -> &CH_TX_LIM {
&self.ch_tx_lim[n]
}
#[doc = "Iterator for array of:"]
#[doc = "0x58..0x60 - RMT_CH%s_TX_LIM_REG."]
#[inline(always)]
pub fn ch_tx_lim_iter(&self) -> impl Iterator<Item = &CH_TX_LIM> {
self.ch_tx_lim.iter()
}
#[doc = "0x58 - RMT_CH0_TX_LIM_REG."]
#[inline(always)]
pub const fn ch0_tx_lim(&self) -> &CH_TX_LIM {
self.ch_tx_lim(0)
}
#[doc = "0x5c - RMT_CH1_TX_LIM_REG."]
#[inline(always)]
pub const fn ch1_tx_lim(&self) -> &CH_TX_LIM {
self.ch_tx_lim(1)
}
#[doc = "0x60..0x68 - RMT_CH2_RX_LIM_REG."]
#[doc = ""]
#[doc = "<div class=\"warning\">`n` is the index of register in the array. `n == 0` corresponds to `CH2_RX_LIM` register.</div>"]
#[inline(always)]
pub const fn ch_rx_lim(&self, n: usize) -> &CH_RX_LIM {
&self.ch_rx_lim[n]
}
#[doc = "Iterator for array of:"]
#[doc = "0x60..0x68 - RMT_CH2_RX_LIM_REG."]
#[inline(always)]
pub fn ch_rx_lim_iter(&self) -> impl Iterator<Item = &CH_RX_LIM> {
self.ch_rx_lim.iter()
}
#[doc = "0x60 - RMT_CH2_RX_LIM_REG."]
#[inline(always)]
pub const fn ch2_rx_lim(&self) -> &CH_RX_LIM {
self.ch_rx_lim(0)
}
#[doc = "0x64 - RMT_CH2_RX_LIM_REG."]
#[inline(always)]
pub const fn ch3_rx_lim(&self) -> &CH_RX_LIM {
self.ch_rx_lim(1)
}
#[doc = "0x68 - RMT_SYS_CONF_REG."]
#[inline(always)]
pub const fn sys_conf(&self) -> &SYS_CONF {
&self.sys_conf
}
#[doc = "0x6c - RMT_TX_SIM_REG."]
#[inline(always)]
pub const fn tx_sim(&self) -> &TX_SIM {
&self.tx_sim
}
#[doc = "0x70 - RMT_REF_CNT_RST_REG."]
#[inline(always)]
pub const fn ref_cnt_rst(&self) -> &REF_CNT_RST {
&self.ref_cnt_rst
}
#[doc = "0xcc - RMT_DATE_REG."]
#[inline(always)]
pub const fn date(&self) -> &DATE {
&self.date
}
}
#[doc = "CHDATA (rw) register accessor: RMT_CH%sDATA_REG.\n\nYou can [`read`](crate::Reg::read) this register and get [`chdata::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`chdata::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@chdata`] module"]
pub type CHDATA = crate::Reg<chdata::CHDATA_SPEC>;
#[doc = "RMT_CH%sDATA_REG."]
pub mod chdata;
#[doc = "CH_TX_CONF0 (rw) register accessor: RMT_CH%sCONF%s_REG.\n\nYou can [`read`](crate::Reg::read) this register and get [`ch_tx_conf0::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`ch_tx_conf0::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ch_tx_conf0`] module"]
pub type CH_TX_CONF0 = crate::Reg<ch_tx_conf0::CH_TX_CONF0_SPEC>;
#[doc = "RMT_CH%sCONF%s_REG."]
pub mod ch_tx_conf0;
#[doc = "CH_RX_CONF0 (rw) register accessor: RMT_CH2CONF0_REG.\n\nYou can [`read`](crate::Reg::read) this register and get [`ch_rx_conf0::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`ch_rx_conf0::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ch_rx_conf0`] module"]
pub type CH_RX_CONF0 = crate::Reg<ch_rx_conf0::CH_RX_CONF0_SPEC>;
#[doc = "RMT_CH2CONF0_REG."]
pub mod ch_rx_conf0;
#[doc = "CH_RX_CONF1 (rw) register accessor: RMT_CH2CONF1_REG.\n\nYou can [`read`](crate::Reg::read) this register and get [`ch_rx_conf1::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`ch_rx_conf1::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ch_rx_conf1`] module"]
pub type CH_RX_CONF1 = crate::Reg<ch_rx_conf1::CH_RX_CONF1_SPEC>;
#[doc = "RMT_CH2CONF1_REG."]
pub mod ch_rx_conf1;
#[doc = "CH_TX_STATUS (r) register accessor: RMT_CH%sSTATUS_REG.\n\nYou can [`read`](crate::Reg::read) this register and get [`ch_tx_status::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ch_tx_status`] module"]
pub type CH_TX_STATUS = crate::Reg<ch_tx_status::CH_TX_STATUS_SPEC>;
#[doc = "RMT_CH%sSTATUS_REG."]
pub mod ch_tx_status;
#[doc = "CH_RX_STATUS (r) register accessor: RMT_CH2STATUS_REG.\n\nYou can [`read`](crate::Reg::read) this register and get [`ch_rx_status::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ch_rx_status`] module"]
pub type CH_RX_STATUS = crate::Reg<ch_rx_status::CH_RX_STATUS_SPEC>;
#[doc = "RMT_CH2STATUS_REG."]
pub mod ch_rx_status;
#[doc = "INT_RAW (rw) register accessor: RMT_INT_RAW_REG.\n\nYou can [`read`](crate::Reg::read) this register and get [`int_raw::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`int_raw::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@int_raw`] module"]
pub type INT_RAW = crate::Reg<int_raw::INT_RAW_SPEC>;
#[doc = "RMT_INT_RAW_REG."]
pub mod int_raw;
#[doc = "INT_ST (r) register accessor: RMT_INT_ST_REG.\n\nYou can [`read`](crate::Reg::read) this register and get [`int_st::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@int_st`] module"]
pub type INT_ST = crate::Reg<int_st::INT_ST_SPEC>;
#[doc = "RMT_INT_ST_REG."]
pub mod int_st;
#[doc = "INT_ENA (rw) register accessor: RMT_INT_ENA_REG.\n\nYou can [`read`](crate::Reg::read) this register and get [`int_ena::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`int_ena::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@int_ena`] module"]
pub type INT_ENA = crate::Reg<int_ena::INT_ENA_SPEC>;
#[doc = "RMT_INT_ENA_REG."]
pub mod int_ena;
#[doc = "INT_CLR (w) register accessor: RMT_INT_CLR_REG.\n\nYou can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`int_clr::W`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@int_clr`] module"]
pub type INT_CLR = crate::Reg<int_clr::INT_CLR_SPEC>;
#[doc = "RMT_INT_CLR_REG."]
pub mod int_clr;
#[doc = "CHCARRIER_DUTY (rw) register accessor: RMT_CH%sCARRIER_DUTY_REG.\n\nYou can [`read`](crate::Reg::read) this register and get [`chcarrier_duty::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`chcarrier_duty::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@chcarrier_duty`] module"]
pub type CHCARRIER_DUTY = crate::Reg<chcarrier_duty::CHCARRIER_DUTY_SPEC>;
#[doc = "RMT_CH%sCARRIER_DUTY_REG."]
pub mod chcarrier_duty;
#[doc = "CH_RX_CARRIER_RM (rw) register accessor: RMT_CH2_RX_CARRIER_RM_REG.\n\nYou can [`read`](crate::Reg::read) this register and get [`ch_rx_carrier_rm::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`ch_rx_carrier_rm::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ch_rx_carrier_rm`] module"]
pub type CH_RX_CARRIER_RM = crate::Reg<ch_rx_carrier_rm::CH_RX_CARRIER_RM_SPEC>;
#[doc = "RMT_CH2_RX_CARRIER_RM_REG."]
pub mod ch_rx_carrier_rm;
#[doc = "CH_TX_LIM (rw) register accessor: RMT_CH%s_TX_LIM_REG.\n\nYou can [`read`](crate::Reg::read) this register and get [`ch_tx_lim::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`ch_tx_lim::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ch_tx_lim`] module"]
pub type CH_TX_LIM = crate::Reg<ch_tx_lim::CH_TX_LIM_SPEC>;
#[doc = "RMT_CH%s_TX_LIM_REG."]
pub mod ch_tx_lim;
#[doc = "CH_RX_LIM (rw) register accessor: RMT_CH2_RX_LIM_REG.\n\nYou can [`read`](crate::Reg::read) this register and get [`ch_rx_lim::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`ch_rx_lim::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ch_rx_lim`] module"]
pub type CH_RX_LIM = crate::Reg<ch_rx_lim::CH_RX_LIM_SPEC>;
#[doc = "RMT_CH2_RX_LIM_REG."]
pub mod ch_rx_lim;
#[doc = "SYS_CONF (rw) register accessor: RMT_SYS_CONF_REG.\n\nYou can [`read`](crate::Reg::read) this register and get [`sys_conf::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`sys_conf::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@sys_conf`] module"]
pub type SYS_CONF = crate::Reg<sys_conf::SYS_CONF_SPEC>;
#[doc = "RMT_SYS_CONF_REG."]
pub mod sys_conf;
#[doc = "TX_SIM (rw) register accessor: RMT_TX_SIM_REG.\n\nYou can [`read`](crate::Reg::read) this register and get [`tx_sim::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`tx_sim::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@tx_sim`] module"]
pub type TX_SIM = crate::Reg<tx_sim::TX_SIM_SPEC>;
#[doc = "RMT_TX_SIM_REG."]
pub mod tx_sim;
#[doc = "REF_CNT_RST (w) register accessor: RMT_REF_CNT_RST_REG.\n\nYou can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`ref_cnt_rst::W`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ref_cnt_rst`] module"]
pub type REF_CNT_RST = crate::Reg<ref_cnt_rst::REF_CNT_RST_SPEC>;
#[doc = "RMT_REF_CNT_RST_REG."]
pub mod ref_cnt_rst;
#[doc = "DATE (rw) register accessor: RMT_DATE_REG.\n\nYou can [`read`](crate::Reg::read) this register and get [`date::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`date::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@date`] module"]
pub type DATE = crate::Reg<date::DATE_SPEC>;
#[doc = "RMT_DATE_REG."]
pub mod date;