#[doc = r"Register block"]
#[repr(C)]
#[cfg_attr(feature = "impl-register-debug", derive(Debug))]
pub struct RegisterBlock {
bt_select: BT_SELECT,
out: OUT,
out_w1ts: OUT_W1TS,
out_w1tc: OUT_W1TC,
_reserved4: [u8; 0x0c],
sdio_select: SDIO_SELECT,
enable: ENABLE,
enable_w1ts: ENABLE_W1TS,
enable_w1tc: ENABLE_W1TC,
_reserved8: [u8; 0x0c],
strap: STRAP,
in_: IN,
_reserved10: [u8; 0x04],
status: STATUS,
status_w1ts: STATUS_W1TS,
status_w1tc: STATUS_W1TC,
_reserved13: [u8; 0x0c],
pcpu_int: PCPU_INT,
pcpu_nmi_int: PCPU_NMI_INT,
cpusdio_int: CPUSDIO_INT,
_reserved16: [u8; 0x0c],
pin: [PIN; 26],
_reserved17: [u8; 0x70],
status_next: STATUS_NEXT,
_reserved18: [u8; 0x04],
func_in_sel_cfg: [FUNC_IN_SEL_CFG; 128],
_reserved19: [u8; 0x0200],
func_out_sel_cfg: [FUNC_OUT_SEL_CFG; 26],
_reserved20: [u8; 0x70],
clock_gate: CLOCK_GATE,
_reserved21: [u8; 0xcc],
reg_date: REG_DATE,
}
impl RegisterBlock {
#[doc = "0x00 - GPIO bit select register"]
#[inline(always)]
pub const fn bt_select(&self) -> &BT_SELECT {
&self.bt_select
}
#[doc = "0x04 - GPIO output register"]
#[inline(always)]
pub const fn out(&self) -> &OUT {
&self.out
}
#[doc = "0x08 - GPIO output set register"]
#[inline(always)]
pub const fn out_w1ts(&self) -> &OUT_W1TS {
&self.out_w1ts
}
#[doc = "0x0c - GPIO output clear register"]
#[inline(always)]
pub const fn out_w1tc(&self) -> &OUT_W1TC {
&self.out_w1tc
}
#[doc = "0x1c - GPIO sdio select register"]
#[inline(always)]
pub const fn sdio_select(&self) -> &SDIO_SELECT {
&self.sdio_select
}
#[doc = "0x20 - GPIO output enable register"]
#[inline(always)]
pub const fn enable(&self) -> &ENABLE {
&self.enable
}
#[doc = "0x24 - GPIO output enable set register"]
#[inline(always)]
pub const fn enable_w1ts(&self) -> &ENABLE_W1TS {
&self.enable_w1ts
}
#[doc = "0x28 - GPIO output enable clear register"]
#[inline(always)]
pub const fn enable_w1tc(&self) -> &ENABLE_W1TC {
&self.enable_w1tc
}
#[doc = "0x38 - pad strapping register"]
#[inline(always)]
pub const fn strap(&self) -> &STRAP {
&self.strap
}
#[doc = "0x3c - GPIO input register"]
#[inline(always)]
pub const fn in_(&self) -> &IN {
&self.in_
}
#[doc = "0x44 - GPIO interrupt status register"]
#[inline(always)]
pub const fn status(&self) -> &STATUS {
&self.status
}
#[doc = "0x48 - GPIO interrupt status set register"]
#[inline(always)]
pub const fn status_w1ts(&self) -> &STATUS_W1TS {
&self.status_w1ts
}
#[doc = "0x4c - GPIO interrupt status clear register"]
#[inline(always)]
pub const fn status_w1tc(&self) -> &STATUS_W1TC {
&self.status_w1tc
}
#[doc = "0x5c - GPIO PRO_CPU interrupt status register"]
#[inline(always)]
pub const fn pcpu_int(&self) -> &PCPU_INT {
&self.pcpu_int
}
#[doc = "0x60 - GPIO PRO_CPU(not shielded) interrupt status register"]
#[inline(always)]
pub const fn pcpu_nmi_int(&self) -> &PCPU_NMI_INT {
&self.pcpu_nmi_int
}
#[doc = "0x64 - GPIO CPUSDIO interrupt status register"]
#[inline(always)]
pub const fn cpusdio_int(&self) -> &CPUSDIO_INT {
&self.cpusdio_int
}
#[doc = "0x74..0xdc - GPIO pin configuration register"]
#[inline(always)]
pub const fn pin(&self, n: usize) -> &PIN {
&self.pin[n]
}
#[doc = "Iterator for array of:"]
#[doc = "0x74..0xdc - GPIO pin configuration register"]
#[inline(always)]
pub fn pin_iter(&self) -> impl Iterator<Item = &PIN> {
self.pin.iter()
}
#[doc = "0x14c - GPIO interrupt source register"]
#[inline(always)]
pub const fn status_next(&self) -> &STATUS_NEXT {
&self.status_next
}
#[doc = "0x154..0x354 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func_in_sel_cfg(&self, n: usize) -> &FUNC_IN_SEL_CFG {
&self.func_in_sel_cfg[n]
}
#[doc = "Iterator for array of:"]
#[doc = "0x154..0x354 - GPIO input function configuration register"]
#[inline(always)]
pub fn func_in_sel_cfg_iter(&self) -> impl Iterator<Item = &FUNC_IN_SEL_CFG> {
self.func_in_sel_cfg.iter()
}
#[doc = "0x154 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func0_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(0)
}
#[doc = "0x158 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func1_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(1)
}
#[doc = "0x15c - GPIO input function configuration register"]
#[inline(always)]
pub const fn func2_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(2)
}
#[doc = "0x160 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func3_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(3)
}
#[doc = "0x164 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func4_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(4)
}
#[doc = "0x168 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func5_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(5)
}
#[doc = "0x16c - GPIO input function configuration register"]
#[inline(always)]
pub const fn func6_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(6)
}
#[doc = "0x170 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func7_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(7)
}
#[doc = "0x174 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func8_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(8)
}
#[doc = "0x178 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func9_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(9)
}
#[doc = "0x17c - GPIO input function configuration register"]
#[inline(always)]
pub const fn func10_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(10)
}
#[doc = "0x180 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func11_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(11)
}
#[doc = "0x184 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func12_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(12)
}
#[doc = "0x188 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func13_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(13)
}
#[doc = "0x18c - GPIO input function configuration register"]
#[inline(always)]
pub const fn func14_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(14)
}
#[doc = "0x190 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func15_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(15)
}
#[doc = "0x194 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func16_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(16)
}
#[doc = "0x198 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func17_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(17)
}
#[doc = "0x19c - GPIO input function configuration register"]
#[inline(always)]
pub const fn func18_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(18)
}
#[doc = "0x1a0 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func19_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(19)
}
#[doc = "0x1a4 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func20_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(20)
}
#[doc = "0x1a8 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func21_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(21)
}
#[doc = "0x1ac - GPIO input function configuration register"]
#[inline(always)]
pub const fn func22_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(22)
}
#[doc = "0x1b0 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func23_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(23)
}
#[doc = "0x1b4 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func24_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(24)
}
#[doc = "0x1b8 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func25_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(25)
}
#[doc = "0x1bc - GPIO input function configuration register"]
#[inline(always)]
pub const fn func26_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(26)
}
#[doc = "0x1c0 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func27_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(27)
}
#[doc = "0x1c4 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func28_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(28)
}
#[doc = "0x1c8 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func29_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(29)
}
#[doc = "0x1cc - GPIO input function configuration register"]
#[inline(always)]
pub const fn func30_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(30)
}
#[doc = "0x1d0 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func31_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(31)
}
#[doc = "0x1d4 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func32_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(32)
}
#[doc = "0x1d8 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func33_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(33)
}
#[doc = "0x1dc - GPIO input function configuration register"]
#[inline(always)]
pub const fn func34_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(34)
}
#[doc = "0x1e0 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func35_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(35)
}
#[doc = "0x1e4 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func36_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(36)
}
#[doc = "0x1e8 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func37_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(37)
}
#[doc = "0x1ec - GPIO input function configuration register"]
#[inline(always)]
pub const fn func38_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(38)
}
#[doc = "0x1f0 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func39_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(39)
}
#[doc = "0x1f4 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func40_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(40)
}
#[doc = "0x1f8 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func41_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(41)
}
#[doc = "0x1fc - GPIO input function configuration register"]
#[inline(always)]
pub const fn func42_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(42)
}
#[doc = "0x200 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func43_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(43)
}
#[doc = "0x204 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func44_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(44)
}
#[doc = "0x208 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func45_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(45)
}
#[doc = "0x20c - GPIO input function configuration register"]
#[inline(always)]
pub const fn func46_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(46)
}
#[doc = "0x210 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func47_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(47)
}
#[doc = "0x214 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func48_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(48)
}
#[doc = "0x218 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func49_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(49)
}
#[doc = "0x21c - GPIO input function configuration register"]
#[inline(always)]
pub const fn func50_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(50)
}
#[doc = "0x220 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func51_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(51)
}
#[doc = "0x224 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func52_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(52)
}
#[doc = "0x228 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func53_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(53)
}
#[doc = "0x22c - GPIO input function configuration register"]
#[inline(always)]
pub const fn func54_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(54)
}
#[doc = "0x230 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func55_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(55)
}
#[doc = "0x234 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func56_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(56)
}
#[doc = "0x238 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func57_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(57)
}
#[doc = "0x23c - GPIO input function configuration register"]
#[inline(always)]
pub const fn func58_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(58)
}
#[doc = "0x240 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func59_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(59)
}
#[doc = "0x244 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func60_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(60)
}
#[doc = "0x248 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func61_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(61)
}
#[doc = "0x24c - GPIO input function configuration register"]
#[inline(always)]
pub const fn func62_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(62)
}
#[doc = "0x250 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func63_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(63)
}
#[doc = "0x254 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func64_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(64)
}
#[doc = "0x258 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func65_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(65)
}
#[doc = "0x25c - GPIO input function configuration register"]
#[inline(always)]
pub const fn func66_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(66)
}
#[doc = "0x260 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func67_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(67)
}
#[doc = "0x264 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func68_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(68)
}
#[doc = "0x268 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func69_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(69)
}
#[doc = "0x26c - GPIO input function configuration register"]
#[inline(always)]
pub const fn func70_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(70)
}
#[doc = "0x270 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func71_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(71)
}
#[doc = "0x274 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func72_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(72)
}
#[doc = "0x278 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func73_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(73)
}
#[doc = "0x27c - GPIO input function configuration register"]
#[inline(always)]
pub const fn func74_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(74)
}
#[doc = "0x280 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func75_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(75)
}
#[doc = "0x284 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func76_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(76)
}
#[doc = "0x288 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func77_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(77)
}
#[doc = "0x28c - GPIO input function configuration register"]
#[inline(always)]
pub const fn func78_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(78)
}
#[doc = "0x290 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func79_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(79)
}
#[doc = "0x294 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func80_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(80)
}
#[doc = "0x298 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func81_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(81)
}
#[doc = "0x29c - GPIO input function configuration register"]
#[inline(always)]
pub const fn func82_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(82)
}
#[doc = "0x2a0 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func83_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(83)
}
#[doc = "0x2a4 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func84_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(84)
}
#[doc = "0x2a8 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func85_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(85)
}
#[doc = "0x2ac - GPIO input function configuration register"]
#[inline(always)]
pub const fn func86_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(86)
}
#[doc = "0x2b0 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func87_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(87)
}
#[doc = "0x2b4 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func88_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(88)
}
#[doc = "0x2b8 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func89_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(89)
}
#[doc = "0x2bc - GPIO input function configuration register"]
#[inline(always)]
pub const fn func90_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(90)
}
#[doc = "0x2c0 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func91_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(91)
}
#[doc = "0x2c4 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func92_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(92)
}
#[doc = "0x2c8 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func93_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(93)
}
#[doc = "0x2cc - GPIO input function configuration register"]
#[inline(always)]
pub const fn func94_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(94)
}
#[doc = "0x2d0 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func95_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(95)
}
#[doc = "0x2d4 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func96_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(96)
}
#[doc = "0x2d8 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func97_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(97)
}
#[doc = "0x2dc - GPIO input function configuration register"]
#[inline(always)]
pub const fn func98_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(98)
}
#[doc = "0x2e0 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func99_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(99)
}
#[doc = "0x2e4 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func100_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(100)
}
#[doc = "0x2e8 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func101_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(101)
}
#[doc = "0x2ec - GPIO input function configuration register"]
#[inline(always)]
pub const fn func102_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(102)
}
#[doc = "0x2f0 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func103_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(103)
}
#[doc = "0x2f4 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func104_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(104)
}
#[doc = "0x2f8 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func105_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(105)
}
#[doc = "0x2fc - GPIO input function configuration register"]
#[inline(always)]
pub const fn func106_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(106)
}
#[doc = "0x300 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func107_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(107)
}
#[doc = "0x304 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func108_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(108)
}
#[doc = "0x308 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func109_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(109)
}
#[doc = "0x30c - GPIO input function configuration register"]
#[inline(always)]
pub const fn func110_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(110)
}
#[doc = "0x310 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func111_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(111)
}
#[doc = "0x314 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func112_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(112)
}
#[doc = "0x318 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func113_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(113)
}
#[doc = "0x31c - GPIO input function configuration register"]
#[inline(always)]
pub const fn func114_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(114)
}
#[doc = "0x320 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func115_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(115)
}
#[doc = "0x324 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func116_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(116)
}
#[doc = "0x328 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func117_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(117)
}
#[doc = "0x32c - GPIO input function configuration register"]
#[inline(always)]
pub const fn func118_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(118)
}
#[doc = "0x330 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func119_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(119)
}
#[doc = "0x334 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func120_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(120)
}
#[doc = "0x338 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func121_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(121)
}
#[doc = "0x33c - GPIO input function configuration register"]
#[inline(always)]
pub const fn func122_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(122)
}
#[doc = "0x340 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func123_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(123)
}
#[doc = "0x344 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func124_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(124)
}
#[doc = "0x348 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func125_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(125)
}
#[doc = "0x34c - GPIO input function configuration register"]
#[inline(always)]
pub const fn func126_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(126)
}
#[doc = "0x350 - GPIO input function configuration register"]
#[inline(always)]
pub const fn func127_in_sel_cfg(&self) -> &FUNC_IN_SEL_CFG {
self.func_in_sel_cfg(127)
}
#[doc = "0x554..0x5bc - GPIO output function select register"]
#[inline(always)]
pub const fn func_out_sel_cfg(&self, n: usize) -> &FUNC_OUT_SEL_CFG {
&self.func_out_sel_cfg[n]
}
#[doc = "Iterator for array of:"]
#[doc = "0x554..0x5bc - GPIO output function select register"]
#[inline(always)]
pub fn func_out_sel_cfg_iter(&self) -> impl Iterator<Item = &FUNC_OUT_SEL_CFG> {
self.func_out_sel_cfg.iter()
}
#[doc = "0x554 - GPIO output function select register"]
#[inline(always)]
pub const fn func0_out_sel_cfg(&self) -> &FUNC_OUT_SEL_CFG {
self.func_out_sel_cfg(0)
}
#[doc = "0x558 - GPIO output function select register"]
#[inline(always)]
pub const fn func1_out_sel_cfg(&self) -> &FUNC_OUT_SEL_CFG {
self.func_out_sel_cfg(1)
}
#[doc = "0x55c - GPIO output function select register"]
#[inline(always)]
pub const fn func2_out_sel_cfg(&self) -> &FUNC_OUT_SEL_CFG {
self.func_out_sel_cfg(2)
}
#[doc = "0x560 - GPIO output function select register"]
#[inline(always)]
pub const fn func3_out_sel_cfg(&self) -> &FUNC_OUT_SEL_CFG {
self.func_out_sel_cfg(3)
}
#[doc = "0x564 - GPIO output function select register"]
#[inline(always)]
pub const fn func4_out_sel_cfg(&self) -> &FUNC_OUT_SEL_CFG {
self.func_out_sel_cfg(4)
}
#[doc = "0x568 - GPIO output function select register"]
#[inline(always)]
pub const fn func5_out_sel_cfg(&self) -> &FUNC_OUT_SEL_CFG {
self.func_out_sel_cfg(5)
}
#[doc = "0x56c - GPIO output function select register"]
#[inline(always)]
pub const fn func6_out_sel_cfg(&self) -> &FUNC_OUT_SEL_CFG {
self.func_out_sel_cfg(6)
}
#[doc = "0x570 - GPIO output function select register"]
#[inline(always)]
pub const fn func7_out_sel_cfg(&self) -> &FUNC_OUT_SEL_CFG {
self.func_out_sel_cfg(7)
}
#[doc = "0x574 - GPIO output function select register"]
#[inline(always)]
pub const fn func8_out_sel_cfg(&self) -> &FUNC_OUT_SEL_CFG {
self.func_out_sel_cfg(8)
}
#[doc = "0x578 - GPIO output function select register"]
#[inline(always)]
pub const fn func9_out_sel_cfg(&self) -> &FUNC_OUT_SEL_CFG {
self.func_out_sel_cfg(9)
}
#[doc = "0x57c - GPIO output function select register"]
#[inline(always)]
pub const fn func10_out_sel_cfg(&self) -> &FUNC_OUT_SEL_CFG {
self.func_out_sel_cfg(10)
}
#[doc = "0x580 - GPIO output function select register"]
#[inline(always)]
pub const fn func11_out_sel_cfg(&self) -> &FUNC_OUT_SEL_CFG {
self.func_out_sel_cfg(11)
}
#[doc = "0x584 - GPIO output function select register"]
#[inline(always)]
pub const fn func12_out_sel_cfg(&self) -> &FUNC_OUT_SEL_CFG {
self.func_out_sel_cfg(12)
}
#[doc = "0x588 - GPIO output function select register"]
#[inline(always)]
pub const fn func13_out_sel_cfg(&self) -> &FUNC_OUT_SEL_CFG {
self.func_out_sel_cfg(13)
}
#[doc = "0x58c - GPIO output function select register"]
#[inline(always)]
pub const fn func14_out_sel_cfg(&self) -> &FUNC_OUT_SEL_CFG {
self.func_out_sel_cfg(14)
}
#[doc = "0x590 - GPIO output function select register"]
#[inline(always)]
pub const fn func15_out_sel_cfg(&self) -> &FUNC_OUT_SEL_CFG {
self.func_out_sel_cfg(15)
}
#[doc = "0x594 - GPIO output function select register"]
#[inline(always)]
pub const fn func16_out_sel_cfg(&self) -> &FUNC_OUT_SEL_CFG {
self.func_out_sel_cfg(16)
}
#[doc = "0x598 - GPIO output function select register"]
#[inline(always)]
pub const fn func17_out_sel_cfg(&self) -> &FUNC_OUT_SEL_CFG {
self.func_out_sel_cfg(17)
}
#[doc = "0x59c - GPIO output function select register"]
#[inline(always)]
pub const fn func18_out_sel_cfg(&self) -> &FUNC_OUT_SEL_CFG {
self.func_out_sel_cfg(18)
}
#[doc = "0x5a0 - GPIO output function select register"]
#[inline(always)]
pub const fn func19_out_sel_cfg(&self) -> &FUNC_OUT_SEL_CFG {
self.func_out_sel_cfg(19)
}
#[doc = "0x5a4 - GPIO output function select register"]
#[inline(always)]
pub const fn func20_out_sel_cfg(&self) -> &FUNC_OUT_SEL_CFG {
self.func_out_sel_cfg(20)
}
#[doc = "0x5a8 - GPIO output function select register"]
#[inline(always)]
pub const fn func21_out_sel_cfg(&self) -> &FUNC_OUT_SEL_CFG {
self.func_out_sel_cfg(21)
}
#[doc = "0x5ac - GPIO output function select register"]
#[inline(always)]
pub const fn func22_out_sel_cfg(&self) -> &FUNC_OUT_SEL_CFG {
self.func_out_sel_cfg(22)
}
#[doc = "0x5b0 - GPIO output function select register"]
#[inline(always)]
pub const fn func23_out_sel_cfg(&self) -> &FUNC_OUT_SEL_CFG {
self.func_out_sel_cfg(23)
}
#[doc = "0x5b4 - GPIO output function select register"]
#[inline(always)]
pub const fn func24_out_sel_cfg(&self) -> &FUNC_OUT_SEL_CFG {
self.func_out_sel_cfg(24)
}
#[doc = "0x5b8 - GPIO output function select register"]
#[inline(always)]
pub const fn func25_out_sel_cfg(&self) -> &FUNC_OUT_SEL_CFG {
self.func_out_sel_cfg(25)
}
#[doc = "0x62c - GPIO clock gate register"]
#[inline(always)]
pub const fn clock_gate(&self) -> &CLOCK_GATE {
&self.clock_gate
}
#[doc = "0x6fc - GPIO version register"]
#[inline(always)]
pub const fn reg_date(&self) -> ®_DATE {
&self.reg_date
}
}
#[doc = "BT_SELECT (rw) register accessor: GPIO bit select register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`bt_select::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`bt_select::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@bt_select`] module"]
pub type BT_SELECT = crate::Reg<bt_select::BT_SELECT_SPEC>;
#[doc = "GPIO bit select register"]
pub mod bt_select;
#[doc = "OUT (rw) register accessor: GPIO output register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`out::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`out::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@out`] module"]
pub type OUT = crate::Reg<out::OUT_SPEC>;
#[doc = "GPIO output register"]
pub mod out;
#[doc = "OUT_W1TS (w) register accessor: GPIO output set register\n\nYou can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`out_w1ts::W`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@out_w1ts`] module"]
pub type OUT_W1TS = crate::Reg<out_w1ts::OUT_W1TS_SPEC>;
#[doc = "GPIO output set register"]
pub mod out_w1ts;
#[doc = "OUT_W1TC (w) register accessor: GPIO output clear register\n\nYou can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`out_w1tc::W`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@out_w1tc`] module"]
pub type OUT_W1TC = crate::Reg<out_w1tc::OUT_W1TC_SPEC>;
#[doc = "GPIO output clear register"]
pub mod out_w1tc;
#[doc = "SDIO_SELECT (rw) register accessor: GPIO sdio select register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`sdio_select::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`sdio_select::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@sdio_select`] module"]
pub type SDIO_SELECT = crate::Reg<sdio_select::SDIO_SELECT_SPEC>;
#[doc = "GPIO sdio select register"]
pub mod sdio_select;
#[doc = "ENABLE (rw) register accessor: GPIO output enable register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`enable::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`enable::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@enable`] module"]
pub type ENABLE = crate::Reg<enable::ENABLE_SPEC>;
#[doc = "GPIO output enable register"]
pub mod enable;
#[doc = "ENABLE_W1TS (w) register accessor: GPIO output enable set register\n\nYou can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`enable_w1ts::W`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@enable_w1ts`] module"]
pub type ENABLE_W1TS = crate::Reg<enable_w1ts::ENABLE_W1TS_SPEC>;
#[doc = "GPIO output enable set register"]
pub mod enable_w1ts;
#[doc = "ENABLE_W1TC (w) register accessor: GPIO output enable clear register\n\nYou can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`enable_w1tc::W`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@enable_w1tc`] module"]
pub type ENABLE_W1TC = crate::Reg<enable_w1tc::ENABLE_W1TC_SPEC>;
#[doc = "GPIO output enable clear register"]
pub mod enable_w1tc;
#[doc = "STRAP (r) register accessor: pad strapping register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`strap::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@strap`] module"]
pub type STRAP = crate::Reg<strap::STRAP_SPEC>;
#[doc = "pad strapping register"]
pub mod strap;
#[doc = "IN (r) register accessor: GPIO input register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`in_::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@in_`] module"]
pub type IN = crate::Reg<in_::IN_SPEC>;
#[doc = "GPIO input register"]
pub mod in_;
#[doc = "STATUS (rw) register accessor: GPIO interrupt status register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`status::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`status::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@status`] module"]
pub type STATUS = crate::Reg<status::STATUS_SPEC>;
#[doc = "GPIO interrupt status register"]
pub mod status;
#[doc = "STATUS_W1TS (w) register accessor: GPIO interrupt status set register\n\nYou can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`status_w1ts::W`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@status_w1ts`] module"]
pub type STATUS_W1TS = crate::Reg<status_w1ts::STATUS_W1TS_SPEC>;
#[doc = "GPIO interrupt status set register"]
pub mod status_w1ts;
#[doc = "STATUS_W1TC (w) register accessor: GPIO interrupt status clear register\n\nYou can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`status_w1tc::W`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@status_w1tc`] module"]
pub type STATUS_W1TC = crate::Reg<status_w1tc::STATUS_W1TC_SPEC>;
#[doc = "GPIO interrupt status clear register"]
pub mod status_w1tc;
#[doc = "PCPU_INT (r) register accessor: GPIO PRO_CPU interrupt status register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`pcpu_int::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@pcpu_int`] module"]
pub type PCPU_INT = crate::Reg<pcpu_int::PCPU_INT_SPEC>;
#[doc = "GPIO PRO_CPU interrupt status register"]
pub mod pcpu_int;
#[doc = "PCPU_NMI_INT (r) register accessor: GPIO PRO_CPU(not shielded) interrupt status register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`pcpu_nmi_int::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@pcpu_nmi_int`] module"]
pub type PCPU_NMI_INT = crate::Reg<pcpu_nmi_int::PCPU_NMI_INT_SPEC>;
#[doc = "GPIO PRO_CPU(not shielded) interrupt status register"]
pub mod pcpu_nmi_int;
#[doc = "CPUSDIO_INT (r) register accessor: GPIO CPUSDIO interrupt status register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cpusdio_int::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cpusdio_int`] module"]
pub type CPUSDIO_INT = crate::Reg<cpusdio_int::CPUSDIO_INT_SPEC>;
#[doc = "GPIO CPUSDIO interrupt status register"]
pub mod cpusdio_int;
#[doc = "PIN (rw) register accessor: GPIO pin configuration register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`pin::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`pin::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@pin`] module"]
pub type PIN = crate::Reg<pin::PIN_SPEC>;
#[doc = "GPIO pin configuration register"]
pub mod pin;
#[doc = "STATUS_NEXT (r) register accessor: GPIO interrupt source register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`status_next::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@status_next`] module"]
pub type STATUS_NEXT = crate::Reg<status_next::STATUS_NEXT_SPEC>;
#[doc = "GPIO interrupt source register"]
pub mod status_next;
#[doc = "FUNC_IN_SEL_CFG (rw) register accessor: GPIO input function configuration register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`func_in_sel_cfg::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`func_in_sel_cfg::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@func_in_sel_cfg`] module"]
pub type FUNC_IN_SEL_CFG = crate::Reg<func_in_sel_cfg::FUNC_IN_SEL_CFG_SPEC>;
#[doc = "GPIO input function configuration register"]
pub mod func_in_sel_cfg;
#[doc = "FUNC_OUT_SEL_CFG (rw) register accessor: GPIO output function select register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`func_out_sel_cfg::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`func_out_sel_cfg::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@func_out_sel_cfg`] module"]
pub type FUNC_OUT_SEL_CFG = crate::Reg<func_out_sel_cfg::FUNC_OUT_SEL_CFG_SPEC>;
#[doc = "GPIO output function select register"]
pub mod func_out_sel_cfg;
#[doc = "CLOCK_GATE (rw) register accessor: GPIO clock gate register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`clock_gate::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`clock_gate::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@clock_gate`] module"]
pub type CLOCK_GATE = crate::Reg<clock_gate::CLOCK_GATE_SPEC>;
#[doc = "GPIO clock gate register"]
pub mod clock_gate;
#[doc = "REG_DATE (rw) register accessor: GPIO version register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`reg_date::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`reg_date::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@reg_date`] module"]
pub type REG_DATE = crate::Reg<reg_date::REG_DATE_SPEC>;
#[doc = "GPIO version register"]
pub mod reg_date;