Module int_raw Copy item path Source Expand description
INT_RAW_SPEC You can readint_raw::RAPI . AT_CMD_CHAR_DET_R Field AT_CMD_CHAR_DET reader - This interrupt raw bit turns to high level when receiver detects the configured at_cmd chars. BRK_DET_R Field BRK_DET reader - This interrupt raw bit turns to high level when receiver detects the 0 after the stop bit. CTS_CHG_R Field CTS_CHG reader - This interrupt raw bit turns to high level when receiver detects the edge change of ctsn signal. DSR_CHG_R Field DSR_CHG reader - This interrupt raw bit turns to high level when receiver detects the edge change of dsrn signal. FRM_ERR_R Field FRM_ERR reader - This interrupt raw bit turns to high level when receiver detects data’s frame error . GLITCH_DET_R Field GLITCH_DET reader - This interrupt raw bit turns to high level when receiver detects the start bit. PARITY_ERR_R Field PARITY_ERR reader - This interrupt raw bit turns to high level when receiver detects the parity error of data. R Register INT_RAW reader RS485_CLASH_R Field RS485_CLASH reader - This interrupt raw bit turns to high level when rs485 detects the clash between transmitter and receiver. RS485_FRM_ERR_R Field RS485_FRM_ERR reader - This interrupt raw bit turns to high level when rs485 detects the data frame error. RS485_PARITY_ERR_R Field RS485_PARITY_ERR reader - This interrupt raw bit turns to high level when rs485 detects the parity error. RXFIFO_FULL_R Field RXFIFO_FULL reader - This interrupt raw bit turns to high level when receiver receives more data than (rx_flow_thrhd_h3 rx_flow_thrhd). RXFIFO_OVF_R Field RXFIFO_OVF reader - This interrupt raw bit turns to high level when receiver receives more data than the fifo can store. RXFIFO_TOUT_R Field RXFIFO_TOUT reader - This interrupt raw bit turns to high level when receiver takes more time than rx_tout_thrhd to receive a byte. SW_XOFF_R Field SW_XOFF reader - This interrupt raw bit turns to high level when receiver receives xon char with uart_sw_flow_con_en is set to 1. SW_XON_R Field SW_XON reader - This interrupt raw bit turns to high level when receiver receives xoff char with uart_sw_flow_con_en is set to 1. TXFIFO_EMPTY_R Field TXFIFO_EMPTY reader - This interrupt raw bit turns to high level when the amount of data in transmitter’s fifo is less than ((tx_mem_cnttxfifo_cnt) . TX_BRK_DONE_R Field TX_BRK_DONE reader - This interrupt raw bit turns to high level when transmitter completes sendding 0 after all the datas in transmitter’s fifo are send. TX_BRK_IDLE_DONE_R Field TX_BRK_IDLE_DONE reader - This interrupt raw bit turns to high level when transmitter has kept the shortest duration after the last data has been send. TX_DONE_R Field TX_DONE reader - This interrupt raw bit turns to high level when transmitter has send all the data in fifo.