1#[doc = "Register `SENSOR_PADS` reader"]
2pub type R = crate::R<SENSOR_PADS_SPEC>;
3#[doc = "Register `SENSOR_PADS` writer"]
4pub type W = crate::W<SENSOR_PADS_SPEC>;
5#[doc = "Field `SENSE4_FUN_IE` reader - the input enable of the pad"]
6pub type SENSE4_FUN_IE_R = crate::BitReader;
7#[doc = "Field `SENSE4_FUN_IE` writer - the input enable of the pad"]
8pub type SENSE4_FUN_IE_W<'a, REG> = crate::BitWriter<'a, REG>;
9#[doc = "Field `SENSE4_SLP_IE` reader - the input enable of the pad in sleep status"]
10pub type SENSE4_SLP_IE_R = crate::BitReader;
11#[doc = "Field `SENSE4_SLP_IE` writer - the input enable of the pad in sleep status"]
12pub type SENSE4_SLP_IE_W<'a, REG> = crate::BitWriter<'a, REG>;
13#[doc = "Field `SENSE4_SLP_SEL` reader - the sleep status selection signal of the pad"]
14pub type SENSE4_SLP_SEL_R = crate::BitReader;
15#[doc = "Field `SENSE4_SLP_SEL` writer - the sleep status selection signal of the pad"]
16pub type SENSE4_SLP_SEL_W<'a, REG> = crate::BitWriter<'a, REG>;
17#[doc = "Field `SENSE4_FUN_SEL` reader - the functional selection signal of the pad"]
18pub type SENSE4_FUN_SEL_R = crate::FieldReader;
19#[doc = "Field `SENSE4_FUN_SEL` writer - the functional selection signal of the pad"]
20pub type SENSE4_FUN_SEL_W<'a, REG> = crate::FieldWriter<'a, REG, 2>;
21#[doc = "Field `SENSE3_FUN_IE` reader - the input enable of the pad"]
22pub type SENSE3_FUN_IE_R = crate::BitReader;
23#[doc = "Field `SENSE3_FUN_IE` writer - the input enable of the pad"]
24pub type SENSE3_FUN_IE_W<'a, REG> = crate::BitWriter<'a, REG>;
25#[doc = "Field `SENSE3_SLP_IE` reader - the input enable of the pad in sleep status"]
26pub type SENSE3_SLP_IE_R = crate::BitReader;
27#[doc = "Field `SENSE3_SLP_IE` writer - the input enable of the pad in sleep status"]
28pub type SENSE3_SLP_IE_W<'a, REG> = crate::BitWriter<'a, REG>;
29#[doc = "Field `SENSE3_SLP_SEL` reader - the sleep status selection signal of the pad"]
30pub type SENSE3_SLP_SEL_R = crate::BitReader;
31#[doc = "Field `SENSE3_SLP_SEL` writer - the sleep status selection signal of the pad"]
32pub type SENSE3_SLP_SEL_W<'a, REG> = crate::BitWriter<'a, REG>;
33#[doc = "Field `SENSE3_FUN_SEL` reader - the functional selection signal of the pad"]
34pub type SENSE3_FUN_SEL_R = crate::FieldReader;
35#[doc = "Field `SENSE3_FUN_SEL` writer - the functional selection signal of the pad"]
36pub type SENSE3_FUN_SEL_W<'a, REG> = crate::FieldWriter<'a, REG, 2>;
37#[doc = "Field `SENSE2_FUN_IE` reader - the input enable of the pad"]
38pub type SENSE2_FUN_IE_R = crate::BitReader;
39#[doc = "Field `SENSE2_FUN_IE` writer - the input enable of the pad"]
40pub type SENSE2_FUN_IE_W<'a, REG> = crate::BitWriter<'a, REG>;
41#[doc = "Field `SENSE2_SLP_IE` reader - the input enable of the pad in sleep status"]
42pub type SENSE2_SLP_IE_R = crate::BitReader;
43#[doc = "Field `SENSE2_SLP_IE` writer - the input enable of the pad in sleep status"]
44pub type SENSE2_SLP_IE_W<'a, REG> = crate::BitWriter<'a, REG>;
45#[doc = "Field `SENSE2_SLP_SEL` reader - the sleep status selection signal of the pad"]
46pub type SENSE2_SLP_SEL_R = crate::BitReader;
47#[doc = "Field `SENSE2_SLP_SEL` writer - the sleep status selection signal of the pad"]
48pub type SENSE2_SLP_SEL_W<'a, REG> = crate::BitWriter<'a, REG>;
49#[doc = "Field `SENSE2_FUN_SEL` reader - the functional selection signal of the pad"]
50pub type SENSE2_FUN_SEL_R = crate::FieldReader;
51#[doc = "Field `SENSE2_FUN_SEL` writer - the functional selection signal of the pad"]
52pub type SENSE2_FUN_SEL_W<'a, REG> = crate::FieldWriter<'a, REG, 2>;
53#[doc = "Field `SENSE1_FUN_IE` reader - the input enable of the pad"]
54pub type SENSE1_FUN_IE_R = crate::BitReader;
55#[doc = "Field `SENSE1_FUN_IE` writer - the input enable of the pad"]
56pub type SENSE1_FUN_IE_W<'a, REG> = crate::BitWriter<'a, REG>;
57#[doc = "Field `SENSE1_SLP_IE` reader - the input enable of the pad in sleep status"]
58pub type SENSE1_SLP_IE_R = crate::BitReader;
59#[doc = "Field `SENSE1_SLP_IE` writer - the input enable of the pad in sleep status"]
60pub type SENSE1_SLP_IE_W<'a, REG> = crate::BitWriter<'a, REG>;
61#[doc = "Field `SENSE1_SLP_SEL` reader - the sleep status selection signal of the pad"]
62pub type SENSE1_SLP_SEL_R = crate::BitReader;
63#[doc = "Field `SENSE1_SLP_SEL` writer - the sleep status selection signal of the pad"]
64pub type SENSE1_SLP_SEL_W<'a, REG> = crate::BitWriter<'a, REG>;
65#[doc = "Field `SENSE1_FUN_SEL` reader - the functional selection signal of the pad"]
66pub type SENSE1_FUN_SEL_R = crate::FieldReader;
67#[doc = "Field `SENSE1_FUN_SEL` writer - the functional selection signal of the pad"]
68pub type SENSE1_FUN_SEL_W<'a, REG> = crate::FieldWriter<'a, REG, 2>;
69#[doc = "Field `SENSE4_MUX_SEL` reader - Ò1Ó select the digital function Ó0Óslection the rtc function"]
70pub type SENSE4_MUX_SEL_R = crate::BitReader;
71#[doc = "Field `SENSE4_MUX_SEL` writer - Ò1Ó select the digital function Ó0Óslection the rtc function"]
72pub type SENSE4_MUX_SEL_W<'a, REG> = crate::BitWriter<'a, REG>;
73#[doc = "Field `SENSE3_MUX_SEL` reader - Ò1Ó select the digital function Ó0Óslection the rtc function"]
74pub type SENSE3_MUX_SEL_R = crate::BitReader;
75#[doc = "Field `SENSE3_MUX_SEL` writer - Ò1Ó select the digital function Ó0Óslection the rtc function"]
76pub type SENSE3_MUX_SEL_W<'a, REG> = crate::BitWriter<'a, REG>;
77#[doc = "Field `SENSE2_MUX_SEL` reader - Ò1Ó select the digital function Ó0Óslection the rtc function"]
78pub type SENSE2_MUX_SEL_R = crate::BitReader;
79#[doc = "Field `SENSE2_MUX_SEL` writer - Ò1Ó select the digital function Ó0Óslection the rtc function"]
80pub type SENSE2_MUX_SEL_W<'a, REG> = crate::BitWriter<'a, REG>;
81#[doc = "Field `SENSE1_MUX_SEL` reader - Ò1Ó select the digital function Ó0Óslection the rtc function"]
82pub type SENSE1_MUX_SEL_R = crate::BitReader;
83#[doc = "Field `SENSE1_MUX_SEL` writer - Ò1Ó select the digital function Ó0Óslection the rtc function"]
84pub type SENSE1_MUX_SEL_W<'a, REG> = crate::BitWriter<'a, REG>;
85#[doc = "Field `SENSE4_HOLD` reader - hold the current value of the output when setting the hold to Ò1Ó"]
86pub type SENSE4_HOLD_R = crate::BitReader;
87#[doc = "Field `SENSE4_HOLD` writer - hold the current value of the output when setting the hold to Ò1Ó"]
88pub type SENSE4_HOLD_W<'a, REG> = crate::BitWriter<'a, REG>;
89#[doc = "Field `SENSE3_HOLD` reader - hold the current value of the output when setting the hold to Ò1Ó"]
90pub type SENSE3_HOLD_R = crate::BitReader;
91#[doc = "Field `SENSE3_HOLD` writer - hold the current value of the output when setting the hold to Ò1Ó"]
92pub type SENSE3_HOLD_W<'a, REG> = crate::BitWriter<'a, REG>;
93#[doc = "Field `SENSE2_HOLD` reader - hold the current value of the output when setting the hold to Ò1Ó"]
94pub type SENSE2_HOLD_R = crate::BitReader;
95#[doc = "Field `SENSE2_HOLD` writer - hold the current value of the output when setting the hold to Ò1Ó"]
96pub type SENSE2_HOLD_W<'a, REG> = crate::BitWriter<'a, REG>;
97#[doc = "Field `SENSE1_HOLD` reader - hold the current value of the output when setting the hold to Ò1Ó"]
98pub type SENSE1_HOLD_R = crate::BitReader;
99#[doc = "Field `SENSE1_HOLD` writer - hold the current value of the output when setting the hold to Ò1Ó"]
100pub type SENSE1_HOLD_W<'a, REG> = crate::BitWriter<'a, REG>;
101impl R {
102 #[doc = "Bit 4 - the input enable of the pad"]
103 #[inline(always)]
104 pub fn sense4_fun_ie(&self) -> SENSE4_FUN_IE_R {
105 SENSE4_FUN_IE_R::new(((self.bits >> 4) & 1) != 0)
106 }
107 #[doc = "Bit 5 - the input enable of the pad in sleep status"]
108 #[inline(always)]
109 pub fn sense4_slp_ie(&self) -> SENSE4_SLP_IE_R {
110 SENSE4_SLP_IE_R::new(((self.bits >> 5) & 1) != 0)
111 }
112 #[doc = "Bit 6 - the sleep status selection signal of the pad"]
113 #[inline(always)]
114 pub fn sense4_slp_sel(&self) -> SENSE4_SLP_SEL_R {
115 SENSE4_SLP_SEL_R::new(((self.bits >> 6) & 1) != 0)
116 }
117 #[doc = "Bits 7:8 - the functional selection signal of the pad"]
118 #[inline(always)]
119 pub fn sense4_fun_sel(&self) -> SENSE4_FUN_SEL_R {
120 SENSE4_FUN_SEL_R::new(((self.bits >> 7) & 3) as u8)
121 }
122 #[doc = "Bit 9 - the input enable of the pad"]
123 #[inline(always)]
124 pub fn sense3_fun_ie(&self) -> SENSE3_FUN_IE_R {
125 SENSE3_FUN_IE_R::new(((self.bits >> 9) & 1) != 0)
126 }
127 #[doc = "Bit 10 - the input enable of the pad in sleep status"]
128 #[inline(always)]
129 pub fn sense3_slp_ie(&self) -> SENSE3_SLP_IE_R {
130 SENSE3_SLP_IE_R::new(((self.bits >> 10) & 1) != 0)
131 }
132 #[doc = "Bit 11 - the sleep status selection signal of the pad"]
133 #[inline(always)]
134 pub fn sense3_slp_sel(&self) -> SENSE3_SLP_SEL_R {
135 SENSE3_SLP_SEL_R::new(((self.bits >> 11) & 1) != 0)
136 }
137 #[doc = "Bits 12:13 - the functional selection signal of the pad"]
138 #[inline(always)]
139 pub fn sense3_fun_sel(&self) -> SENSE3_FUN_SEL_R {
140 SENSE3_FUN_SEL_R::new(((self.bits >> 12) & 3) as u8)
141 }
142 #[doc = "Bit 14 - the input enable of the pad"]
143 #[inline(always)]
144 pub fn sense2_fun_ie(&self) -> SENSE2_FUN_IE_R {
145 SENSE2_FUN_IE_R::new(((self.bits >> 14) & 1) != 0)
146 }
147 #[doc = "Bit 15 - the input enable of the pad in sleep status"]
148 #[inline(always)]
149 pub fn sense2_slp_ie(&self) -> SENSE2_SLP_IE_R {
150 SENSE2_SLP_IE_R::new(((self.bits >> 15) & 1) != 0)
151 }
152 #[doc = "Bit 16 - the sleep status selection signal of the pad"]
153 #[inline(always)]
154 pub fn sense2_slp_sel(&self) -> SENSE2_SLP_SEL_R {
155 SENSE2_SLP_SEL_R::new(((self.bits >> 16) & 1) != 0)
156 }
157 #[doc = "Bits 17:18 - the functional selection signal of the pad"]
158 #[inline(always)]
159 pub fn sense2_fun_sel(&self) -> SENSE2_FUN_SEL_R {
160 SENSE2_FUN_SEL_R::new(((self.bits >> 17) & 3) as u8)
161 }
162 #[doc = "Bit 19 - the input enable of the pad"]
163 #[inline(always)]
164 pub fn sense1_fun_ie(&self) -> SENSE1_FUN_IE_R {
165 SENSE1_FUN_IE_R::new(((self.bits >> 19) & 1) != 0)
166 }
167 #[doc = "Bit 20 - the input enable of the pad in sleep status"]
168 #[inline(always)]
169 pub fn sense1_slp_ie(&self) -> SENSE1_SLP_IE_R {
170 SENSE1_SLP_IE_R::new(((self.bits >> 20) & 1) != 0)
171 }
172 #[doc = "Bit 21 - the sleep status selection signal of the pad"]
173 #[inline(always)]
174 pub fn sense1_slp_sel(&self) -> SENSE1_SLP_SEL_R {
175 SENSE1_SLP_SEL_R::new(((self.bits >> 21) & 1) != 0)
176 }
177 #[doc = "Bits 22:23 - the functional selection signal of the pad"]
178 #[inline(always)]
179 pub fn sense1_fun_sel(&self) -> SENSE1_FUN_SEL_R {
180 SENSE1_FUN_SEL_R::new(((self.bits >> 22) & 3) as u8)
181 }
182 #[doc = "Bit 24 - Ò1Ó select the digital function Ó0Óslection the rtc function"]
183 #[inline(always)]
184 pub fn sense4_mux_sel(&self) -> SENSE4_MUX_SEL_R {
185 SENSE4_MUX_SEL_R::new(((self.bits >> 24) & 1) != 0)
186 }
187 #[doc = "Bit 25 - Ò1Ó select the digital function Ó0Óslection the rtc function"]
188 #[inline(always)]
189 pub fn sense3_mux_sel(&self) -> SENSE3_MUX_SEL_R {
190 SENSE3_MUX_SEL_R::new(((self.bits >> 25) & 1) != 0)
191 }
192 #[doc = "Bit 26 - Ò1Ó select the digital function Ó0Óslection the rtc function"]
193 #[inline(always)]
194 pub fn sense2_mux_sel(&self) -> SENSE2_MUX_SEL_R {
195 SENSE2_MUX_SEL_R::new(((self.bits >> 26) & 1) != 0)
196 }
197 #[doc = "Bit 27 - Ò1Ó select the digital function Ó0Óslection the rtc function"]
198 #[inline(always)]
199 pub fn sense1_mux_sel(&self) -> SENSE1_MUX_SEL_R {
200 SENSE1_MUX_SEL_R::new(((self.bits >> 27) & 1) != 0)
201 }
202 #[doc = "Bit 28 - hold the current value of the output when setting the hold to Ò1Ó"]
203 #[inline(always)]
204 pub fn sense4_hold(&self) -> SENSE4_HOLD_R {
205 SENSE4_HOLD_R::new(((self.bits >> 28) & 1) != 0)
206 }
207 #[doc = "Bit 29 - hold the current value of the output when setting the hold to Ò1Ó"]
208 #[inline(always)]
209 pub fn sense3_hold(&self) -> SENSE3_HOLD_R {
210 SENSE3_HOLD_R::new(((self.bits >> 29) & 1) != 0)
211 }
212 #[doc = "Bit 30 - hold the current value of the output when setting the hold to Ò1Ó"]
213 #[inline(always)]
214 pub fn sense2_hold(&self) -> SENSE2_HOLD_R {
215 SENSE2_HOLD_R::new(((self.bits >> 30) & 1) != 0)
216 }
217 #[doc = "Bit 31 - hold the current value of the output when setting the hold to Ò1Ó"]
218 #[inline(always)]
219 pub fn sense1_hold(&self) -> SENSE1_HOLD_R {
220 SENSE1_HOLD_R::new(((self.bits >> 31) & 1) != 0)
221 }
222}
223#[cfg(feature = "impl-register-debug")]
224impl core::fmt::Debug for R {
225 fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
226 f.debug_struct("SENSOR_PADS")
227 .field("sense4_fun_ie", &self.sense4_fun_ie())
228 .field("sense4_slp_ie", &self.sense4_slp_ie())
229 .field("sense4_slp_sel", &self.sense4_slp_sel())
230 .field("sense4_fun_sel", &self.sense4_fun_sel())
231 .field("sense3_fun_ie", &self.sense3_fun_ie())
232 .field("sense3_slp_ie", &self.sense3_slp_ie())
233 .field("sense3_slp_sel", &self.sense3_slp_sel())
234 .field("sense3_fun_sel", &self.sense3_fun_sel())
235 .field("sense2_fun_ie", &self.sense2_fun_ie())
236 .field("sense2_slp_ie", &self.sense2_slp_ie())
237 .field("sense2_slp_sel", &self.sense2_slp_sel())
238 .field("sense2_fun_sel", &self.sense2_fun_sel())
239 .field("sense1_fun_ie", &self.sense1_fun_ie())
240 .field("sense1_slp_ie", &self.sense1_slp_ie())
241 .field("sense1_slp_sel", &self.sense1_slp_sel())
242 .field("sense1_fun_sel", &self.sense1_fun_sel())
243 .field("sense4_mux_sel", &self.sense4_mux_sel())
244 .field("sense3_mux_sel", &self.sense3_mux_sel())
245 .field("sense2_mux_sel", &self.sense2_mux_sel())
246 .field("sense1_mux_sel", &self.sense1_mux_sel())
247 .field("sense4_hold", &self.sense4_hold())
248 .field("sense3_hold", &self.sense3_hold())
249 .field("sense2_hold", &self.sense2_hold())
250 .field("sense1_hold", &self.sense1_hold())
251 .finish()
252 }
253}
254impl W {
255 #[doc = "Bit 4 - the input enable of the pad"]
256 #[inline(always)]
257 pub fn sense4_fun_ie(&mut self) -> SENSE4_FUN_IE_W<SENSOR_PADS_SPEC> {
258 SENSE4_FUN_IE_W::new(self, 4)
259 }
260 #[doc = "Bit 5 - the input enable of the pad in sleep status"]
261 #[inline(always)]
262 pub fn sense4_slp_ie(&mut self) -> SENSE4_SLP_IE_W<SENSOR_PADS_SPEC> {
263 SENSE4_SLP_IE_W::new(self, 5)
264 }
265 #[doc = "Bit 6 - the sleep status selection signal of the pad"]
266 #[inline(always)]
267 pub fn sense4_slp_sel(&mut self) -> SENSE4_SLP_SEL_W<SENSOR_PADS_SPEC> {
268 SENSE4_SLP_SEL_W::new(self, 6)
269 }
270 #[doc = "Bits 7:8 - the functional selection signal of the pad"]
271 #[inline(always)]
272 pub fn sense4_fun_sel(&mut self) -> SENSE4_FUN_SEL_W<SENSOR_PADS_SPEC> {
273 SENSE4_FUN_SEL_W::new(self, 7)
274 }
275 #[doc = "Bit 9 - the input enable of the pad"]
276 #[inline(always)]
277 pub fn sense3_fun_ie(&mut self) -> SENSE3_FUN_IE_W<SENSOR_PADS_SPEC> {
278 SENSE3_FUN_IE_W::new(self, 9)
279 }
280 #[doc = "Bit 10 - the input enable of the pad in sleep status"]
281 #[inline(always)]
282 pub fn sense3_slp_ie(&mut self) -> SENSE3_SLP_IE_W<SENSOR_PADS_SPEC> {
283 SENSE3_SLP_IE_W::new(self, 10)
284 }
285 #[doc = "Bit 11 - the sleep status selection signal of the pad"]
286 #[inline(always)]
287 pub fn sense3_slp_sel(&mut self) -> SENSE3_SLP_SEL_W<SENSOR_PADS_SPEC> {
288 SENSE3_SLP_SEL_W::new(self, 11)
289 }
290 #[doc = "Bits 12:13 - the functional selection signal of the pad"]
291 #[inline(always)]
292 pub fn sense3_fun_sel(&mut self) -> SENSE3_FUN_SEL_W<SENSOR_PADS_SPEC> {
293 SENSE3_FUN_SEL_W::new(self, 12)
294 }
295 #[doc = "Bit 14 - the input enable of the pad"]
296 #[inline(always)]
297 pub fn sense2_fun_ie(&mut self) -> SENSE2_FUN_IE_W<SENSOR_PADS_SPEC> {
298 SENSE2_FUN_IE_W::new(self, 14)
299 }
300 #[doc = "Bit 15 - the input enable of the pad in sleep status"]
301 #[inline(always)]
302 pub fn sense2_slp_ie(&mut self) -> SENSE2_SLP_IE_W<SENSOR_PADS_SPEC> {
303 SENSE2_SLP_IE_W::new(self, 15)
304 }
305 #[doc = "Bit 16 - the sleep status selection signal of the pad"]
306 #[inline(always)]
307 pub fn sense2_slp_sel(&mut self) -> SENSE2_SLP_SEL_W<SENSOR_PADS_SPEC> {
308 SENSE2_SLP_SEL_W::new(self, 16)
309 }
310 #[doc = "Bits 17:18 - the functional selection signal of the pad"]
311 #[inline(always)]
312 pub fn sense2_fun_sel(&mut self) -> SENSE2_FUN_SEL_W<SENSOR_PADS_SPEC> {
313 SENSE2_FUN_SEL_W::new(self, 17)
314 }
315 #[doc = "Bit 19 - the input enable of the pad"]
316 #[inline(always)]
317 pub fn sense1_fun_ie(&mut self) -> SENSE1_FUN_IE_W<SENSOR_PADS_SPEC> {
318 SENSE1_FUN_IE_W::new(self, 19)
319 }
320 #[doc = "Bit 20 - the input enable of the pad in sleep status"]
321 #[inline(always)]
322 pub fn sense1_slp_ie(&mut self) -> SENSE1_SLP_IE_W<SENSOR_PADS_SPEC> {
323 SENSE1_SLP_IE_W::new(self, 20)
324 }
325 #[doc = "Bit 21 - the sleep status selection signal of the pad"]
326 #[inline(always)]
327 pub fn sense1_slp_sel(&mut self) -> SENSE1_SLP_SEL_W<SENSOR_PADS_SPEC> {
328 SENSE1_SLP_SEL_W::new(self, 21)
329 }
330 #[doc = "Bits 22:23 - the functional selection signal of the pad"]
331 #[inline(always)]
332 pub fn sense1_fun_sel(&mut self) -> SENSE1_FUN_SEL_W<SENSOR_PADS_SPEC> {
333 SENSE1_FUN_SEL_W::new(self, 22)
334 }
335 #[doc = "Bit 24 - Ò1Ó select the digital function Ó0Óslection the rtc function"]
336 #[inline(always)]
337 pub fn sense4_mux_sel(&mut self) -> SENSE4_MUX_SEL_W<SENSOR_PADS_SPEC> {
338 SENSE4_MUX_SEL_W::new(self, 24)
339 }
340 #[doc = "Bit 25 - Ò1Ó select the digital function Ó0Óslection the rtc function"]
341 #[inline(always)]
342 pub fn sense3_mux_sel(&mut self) -> SENSE3_MUX_SEL_W<SENSOR_PADS_SPEC> {
343 SENSE3_MUX_SEL_W::new(self, 25)
344 }
345 #[doc = "Bit 26 - Ò1Ó select the digital function Ó0Óslection the rtc function"]
346 #[inline(always)]
347 pub fn sense2_mux_sel(&mut self) -> SENSE2_MUX_SEL_W<SENSOR_PADS_SPEC> {
348 SENSE2_MUX_SEL_W::new(self, 26)
349 }
350 #[doc = "Bit 27 - Ò1Ó select the digital function Ó0Óslection the rtc function"]
351 #[inline(always)]
352 pub fn sense1_mux_sel(&mut self) -> SENSE1_MUX_SEL_W<SENSOR_PADS_SPEC> {
353 SENSE1_MUX_SEL_W::new(self, 27)
354 }
355 #[doc = "Bit 28 - hold the current value of the output when setting the hold to Ò1Ó"]
356 #[inline(always)]
357 pub fn sense4_hold(&mut self) -> SENSE4_HOLD_W<SENSOR_PADS_SPEC> {
358 SENSE4_HOLD_W::new(self, 28)
359 }
360 #[doc = "Bit 29 - hold the current value of the output when setting the hold to Ò1Ó"]
361 #[inline(always)]
362 pub fn sense3_hold(&mut self) -> SENSE3_HOLD_W<SENSOR_PADS_SPEC> {
363 SENSE3_HOLD_W::new(self, 29)
364 }
365 #[doc = "Bit 30 - hold the current value of the output when setting the hold to Ò1Ó"]
366 #[inline(always)]
367 pub fn sense2_hold(&mut self) -> SENSE2_HOLD_W<SENSOR_PADS_SPEC> {
368 SENSE2_HOLD_W::new(self, 30)
369 }
370 #[doc = "Bit 31 - hold the current value of the output when setting the hold to Ò1Ó"]
371 #[inline(always)]
372 pub fn sense1_hold(&mut self) -> SENSE1_HOLD_W<SENSOR_PADS_SPEC> {
373 SENSE1_HOLD_W::new(self, 31)
374 }
375}
376#[doc = "\n\nYou can [`read`](crate::Reg::read) this register and get [`sensor_pads::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`sensor_pads::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
377pub struct SENSOR_PADS_SPEC;
378impl crate::RegisterSpec for SENSOR_PADS_SPEC {
379 type Ux = u32;
380}
381#[doc = "`read()` method returns [`sensor_pads::R`](R) reader structure"]
382impl crate::Readable for SENSOR_PADS_SPEC {}
383#[doc = "`write(|w| ..)` method takes [`sensor_pads::W`](W) writer structure"]
384impl crate::Writable for SENSOR_PADS_SPEC {
385 type Safety = crate::Unsafe;
386 const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
387 const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
388}
389#[doc = "`reset()` method sets SENSOR_PADS to value 0"]
390impl crate::Resettable for SENSOR_PADS_SPEC {
391 const RESET_VALUE: u32 = 0;
392}