Module comd
Source Expand description
- COMD_SPEC
- You can
read this register and get comd::R. You can reset, write, write_with_zero this register using comd::W. You can also modify this register. See API.
- OPCODE
- Opcode part of command %s.
- ACK_CHECK_EN_R
- Field
ACK_CHECK_EN reader - Acknowledge check enable for command %s. - ACK_CHECK_EN_W
- Field
ACK_CHECK_EN writer - Acknowledge check enable for command %s. - ACK_EXP_R
- Field
ACK_EXP reader - Acknowledge expected for command %s. - ACK_EXP_W
- Field
ACK_EXP writer - Acknowledge expected for command %s. - ACK_VALUE_R
- Field
ACK_VALUE reader - Acknowledge value for command %s. - ACK_VALUE_W
- Field
ACK_VALUE writer - Acknowledge value for command %s. - BYTE_NUM_R
- Field
BYTE_NUM reader - Number of bytes to be sent or received for command %s. - BYTE_NUM_W
- Field
BYTE_NUM writer - Number of bytes to be sent or received for command %s. - COMMAND_DONE_R
- Field
COMMAND_DONE reader - When command0 is done in I2C Master mode this bit changes to high level. - COMMAND_DONE_W
- Field
COMMAND_DONE writer - When command0 is done in I2C Master mode this bit changes to high level. - OPCODE_R
- Field
OPCODE reader - Opcode part of command %s. - OPCODE_W
- Field
OPCODE writer - Opcode part of command %s. - R
- Register
COMD%s reader - W
- Register
COMD%s writer