1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138

#[doc = "Register `INT_CLR` writer"]
pub type W = crate::W<INT_CLR_SPEC>;
#[doc = "Field `RXFIFO_FULL_INT_CLR` writer - Set this bit to clear the rxfifo_full_int interrupt."]
pub type RXFIFO_FULL_INT_CLR_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `TXFIFO_EMPTY_INT_CLR` writer - Set this bit to clear the txfifo_empty_int interrupt."]
pub type TXFIFO_EMPTY_INT_CLR_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `RXFIFO_OVF_INT_CLR` writer - Set this bit to clear the rxfifo_ovf_int interrupt."]
pub type RXFIFO_OVF_INT_CLR_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `END_DETECT_INT_CLR` writer - Set this bit to clear the end_detect_int interrupt."]
pub type END_DETECT_INT_CLR_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `SLAVE_TRAN_COMP_INT_CLR` writer - Set this bit to clear the slave_tran_comp_int interrupt."]
pub type SLAVE_TRAN_COMP_INT_CLR_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `ARBITRATION_LOST_INT_CLR` writer - Set this bit to clear the arbitration_lost_int interrupt."]
pub type ARBITRATION_LOST_INT_CLR_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `MASTER_TRAN_COMP_INT_CLR` writer - Set this bit to clear the master_tran_comp interrupt."]
pub type MASTER_TRAN_COMP_INT_CLR_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `TRANS_COMPLETE_INT_CLR` writer - Set this bit to clear the trans_complete_int interrupt."]
pub type TRANS_COMPLETE_INT_CLR_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `TIME_OUT_INT_CLR` writer - Set this bit to clear the time_out_int interrupt."]
pub type TIME_OUT_INT_CLR_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `TRANS_START_INT_CLR` writer - Set this bit to clear the trans_start_int interrupt."]
pub type TRANS_START_INT_CLR_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `ACK_ERR_INT_CLR` writer - Set this bit to clear the ack_err_int interrupt."]
pub type ACK_ERR_INT_CLR_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `RX_REC_FULL_INT_CLR` writer - Set this bit to clear the rx_rec_full_int interrupt."]
pub type RX_REC_FULL_INT_CLR_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `TX_SEND_EMPTY_INT_CLR` writer - Set this bit to clear the tx_send_empty_int interrupt."]
pub type TX_SEND_EMPTY_INT_CLR_W<'a, REG> = crate::BitWriter<'a, REG>;
#[cfg(feature = "impl-register-debug")]
impl core::fmt::Debug for crate::generic::Reg<INT_CLR_SPEC> {
    fn fmt(&self, f: &mut core::fmt::Formatter<'_>) -> core::fmt::Result {
        write!(f, "(not readable)")
    }
}
impl W {
    #[doc = "Bit 0 - Set this bit to clear the rxfifo_full_int interrupt."]
    #[inline(always)]
    #[must_use]
    pub fn rxfifo_full_int_clr(&mut self) -> RXFIFO_FULL_INT_CLR_W<INT_CLR_SPEC> {
        RXFIFO_FULL_INT_CLR_W::new(self, 0)
    }
    #[doc = "Bit 1 - Set this bit to clear the txfifo_empty_int interrupt."]
    #[inline(always)]
    #[must_use]
    pub fn txfifo_empty_int_clr(&mut self) -> TXFIFO_EMPTY_INT_CLR_W<INT_CLR_SPEC> {
        TXFIFO_EMPTY_INT_CLR_W::new(self, 1)
    }
    #[doc = "Bit 2 - Set this bit to clear the rxfifo_ovf_int interrupt."]
    #[inline(always)]
    #[must_use]
    pub fn rxfifo_ovf_int_clr(&mut self) -> RXFIFO_OVF_INT_CLR_W<INT_CLR_SPEC> {
        RXFIFO_OVF_INT_CLR_W::new(self, 2)
    }
    #[doc = "Bit 3 - Set this bit to clear the end_detect_int interrupt."]
    #[inline(always)]
    #[must_use]
    pub fn end_detect_int_clr(&mut self) -> END_DETECT_INT_CLR_W<INT_CLR_SPEC> {
        END_DETECT_INT_CLR_W::new(self, 3)
    }
    #[doc = "Bit 4 - Set this bit to clear the slave_tran_comp_int interrupt."]
    #[inline(always)]
    #[must_use]
    pub fn slave_tran_comp_int_clr(&mut self) -> SLAVE_TRAN_COMP_INT_CLR_W<INT_CLR_SPEC> {
        SLAVE_TRAN_COMP_INT_CLR_W::new(self, 4)
    }
    #[doc = "Bit 5 - Set this bit to clear the arbitration_lost_int interrupt."]
    #[inline(always)]
    #[must_use]
    pub fn arbitration_lost_int_clr(&mut self) -> ARBITRATION_LOST_INT_CLR_W<INT_CLR_SPEC> {
        ARBITRATION_LOST_INT_CLR_W::new(self, 5)
    }
    #[doc = "Bit 6 - Set this bit to clear the master_tran_comp interrupt."]
    #[inline(always)]
    #[must_use]
    pub fn master_tran_comp_int_clr(&mut self) -> MASTER_TRAN_COMP_INT_CLR_W<INT_CLR_SPEC> {
        MASTER_TRAN_COMP_INT_CLR_W::new(self, 6)
    }
    #[doc = "Bit 7 - Set this bit to clear the trans_complete_int interrupt."]
    #[inline(always)]
    #[must_use]
    pub fn trans_complete_int_clr(&mut self) -> TRANS_COMPLETE_INT_CLR_W<INT_CLR_SPEC> {
        TRANS_COMPLETE_INT_CLR_W::new(self, 7)
    }
    #[doc = "Bit 8 - Set this bit to clear the time_out_int interrupt."]
    #[inline(always)]
    #[must_use]
    pub fn time_out_int_clr(&mut self) -> TIME_OUT_INT_CLR_W<INT_CLR_SPEC> {
        TIME_OUT_INT_CLR_W::new(self, 8)
    }
    #[doc = "Bit 9 - Set this bit to clear the trans_start_int interrupt."]
    #[inline(always)]
    #[must_use]
    pub fn trans_start_int_clr(&mut self) -> TRANS_START_INT_CLR_W<INT_CLR_SPEC> {
        TRANS_START_INT_CLR_W::new(self, 9)
    }
    #[doc = "Bit 10 - Set this bit to clear the ack_err_int interrupt."]
    #[inline(always)]
    #[must_use]
    pub fn ack_err_int_clr(&mut self) -> ACK_ERR_INT_CLR_W<INT_CLR_SPEC> {
        ACK_ERR_INT_CLR_W::new(self, 10)
    }
    #[doc = "Bit 11 - Set this bit to clear the rx_rec_full_int interrupt."]
    #[inline(always)]
    #[must_use]
    pub fn rx_rec_full_int_clr(&mut self) -> RX_REC_FULL_INT_CLR_W<INT_CLR_SPEC> {
        RX_REC_FULL_INT_CLR_W::new(self, 11)
    }
    #[doc = "Bit 12 - Set this bit to clear the tx_send_empty_int interrupt."]
    #[inline(always)]
    #[must_use]
    pub fn tx_send_empty_int_clr(&mut self) -> TX_SEND_EMPTY_INT_CLR_W<INT_CLR_SPEC> {
        TX_SEND_EMPTY_INT_CLR_W::new(self, 12)
    }
    #[doc = r" Writes raw bits to the register."]
    #[doc = r""]
    #[doc = r" # Safety"]
    #[doc = r""]
    #[doc = r" Passing incorrect value can cause undefined behaviour. See reference manual"]
    #[inline(always)]
    pub unsafe fn bits(&mut self, bits: u32) -> &mut Self {
        self.bits = bits;
        self
    }
}
#[doc = "\n\nYou can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`int_clr::W`](W). See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
pub struct INT_CLR_SPEC;
impl crate::RegisterSpec for INT_CLR_SPEC {
    type Ux = u32;
}
#[doc = "`write(|w| ..)` method takes [`int_clr::W`](W) writer structure"]
impl crate::Writable for INT_CLR_SPEC {
    const ZERO_TO_MODIFY_FIELDS_BITMAP: Self::Ux = 0;
    const ONE_TO_MODIFY_FIELDS_BITMAP: Self::Ux = 0;
}
#[doc = "`reset()` method sets INT_CLR to value 0"]
impl crate::Resettable for INT_CLR_SPEC {
    const RESET_VALUE: Self::Ux = 0;
}