Module esp32::i2c0::fifo_conf

Structs

• FIFO_CONF_SPEC
  This register you can read, write_with_zero, reset, write, modify. See API.
• R
  Register FIFO_CONF reader
• W
  Register FIFO_CONF writer

Type Definitions

• FIFO_ADDR_CFG_EN_R
  Field FIFO_ADDR_CFG_EN reader - When this bit is set to 1 then the byte after address represent the offset address of I2C Slave’s ram.
• FIFO_ADDR_CFG_EN_W
  Field FIFO_ADDR_CFG_EN writer - When this bit is set to 1 then the byte after address represent the offset address of I2C Slave’s ram.
• NONFIFO_EN_R
  Field NONFIFO_EN reader - Set this bit to enble apb nonfifo access.
• NONFIFO_EN_W
  Field NONFIFO_EN writer - Set this bit to enble apb nonfifo access.
• NONFIFO_RX_THRES_R
  Field NONFIFO_RX_THRES reader - when I2C receives more than nonfifo_rx_thres data it will produce rx_send_full_int_raw interrupt and update the current offset address of the receiving data.
• NONFIFO_RX_THRES_W
  Field NONFIFO_RX_THRES writer - when I2C receives more than nonfifo_rx_thres data it will produce rx_send_full_int_raw interrupt and update the current offset address of the receiving data.
• NONFIFO_TX_THRES_R
  Field NONFIFO_TX_THRES reader - when I2C sends more than nonfifo_tx_thres data it will produce tx_send_empty_int_raw interrupt and update the current offset address of the sending data.
• NONFIFO_TX_THRES_W
  Field NONFIFO_TX_THRES writer - when I2C sends more than nonfifo_tx_thres data it will produce tx_send_empty_int_raw interrupt and update the current offset address of the sending data.
• RXFIFO_FULL_THRHD_R
  Field RXFIFO_FULL_THRHD reader -
• RXFIFO_FULL_THRHD_W
  Field RXFIFO_FULL_THRHD writer -
• RX_FIFO_RST_R
  Field RX_FIFO_RST reader - Set this bit to reset rx fifo when using apb fifo access.
• RX_FIFO_RST_W
  Field RX_FIFO_RST writer - Set this bit to reset rx fifo when using apb fifo access.
• TXFIFO_EMPTY_THRHD_R
  Field TXFIFO_EMPTY_THRHD reader - Config txfifo empty threhd value when using apb fifo access
• TXFIFO_EMPTY_THRHD_W
  Field TXFIFO_EMPTY_THRHD writer - Config txfifo empty threhd value when using apb fifo access
• TX_FIFO_RST_R
  Field TX_FIFO_RST reader - Set this bit to reset tx fifo when using apb fifo access.
• TX_FIFO_RST_W
  Field TX_FIFO_RST writer - Set this bit to reset tx fifo when using apb fifo access.