Field FUN_DRV
reader - Select the drive strength of the pad. A higher value corresponds with a higher strength. For GPIO34-39, FUN_DRV is always 0. For detailed drive strength, please see note 8 in Table ”Notes on ESP32 Pin Lists”, in ESP32 Datasheet.
Field FUN_DRV
writer - Select the drive strength of the pad. A higher value corresponds with a higher strength. For GPIO34-39, FUN_DRV is always 0. For detailed drive strength, please see note 8 in Table ”Notes on ESP32 Pin Lists”, in ESP32 Datasheet.
Field FUN_IE
reader - Input enable of the pad. 1: input enabled; 0: input disabled.
Field FUN_IE
writer - Input enable of the pad. 1: input enabled; 0: input disabled.
Field FUN_WPD
reader - Pull-down enable of the pad. 1: internal pull-down enabled, 0: internal pull-down disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull-down circuitry, therefore, their FUN_WPD is always 0.
Field FUN_WPD
writer - Pull-down enable of the pad. 1: internal pull-down enabled, 0: internal pull-down disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull-down circuitry, therefore, their FUN_WPD is always 0.
Field FUN_WPU
reader - Pull-up enable of the pad. 1: internal pull-up enabled; 0: internal pull-up disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull- down circuitry, therefore, their FUN_WPU is always 0.
Field FUN_WPU
writer - Pull-up enable of the pad. 1: internal pull-up enabled; 0: internal pull-up disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull- down circuitry, therefore, their FUN_WPU is always 0.
Field MCU_DRV
reader - Select the drive strength of the pad during sleep mode. A higher value corresponds with a higher strength.
Field MCU_DRV
writer - Select the drive strength of the pad during sleep mode. A higher value corresponds with a higher strength.
Field MCU_IE
reader - Input enable of the pad during sleep mode. 1: input enabled; 0: input disabled.
Field MCU_IE
writer - Input enable of the pad during sleep mode. 1: input enabled; 0: input disabled.
Field MCU_OE
reader - Output enable of the pad in sleep mode. 1: enable output; 0: disable output.
Field MCU_OE
writer - Output enable of the pad in sleep mode. 1: enable output; 0: disable output.
Field MCU_SEL
reader - Select the IO_MUX function for this signal. 0 selects Function 0, 1 selects Function 1, etc.
Field MCU_SEL
writer - Select the IO_MUX function for this signal. 0 selects Function 0, 1 selects Function 1, etc.
Field MCU_WPD
reader - Pull-down enable of the pad during sleep mode. 1: internal pull-down enabled; 0: internal pull-down disabled.
Field MCU_WPD
writer - Pull-down enable of the pad during sleep mode. 1: internal pull-down enabled; 0: internal pull-down disabled.
Field MCU_WPU
reader - Pull-up enable of the pad during sleep mode. 1: internal pull-up enabled; 0: internal pull-up disabled.
Field MCU_WPU
writer - Pull-up enable of the pad during sleep mode. 1: internal pull-up enabled; 0: internal pull-up disabled.
Field SLP_SEL
reader - Sleep mode selection of this pad. Set to 1 to put the pad in sleep mode.
Field SLP_SEL
writer - Sleep mode selection of this pad. Set to 1 to put the pad in sleep mode.