Module esp32::io_mux::gpio2

source ·
Expand description

Structs

Type Definitions

  • FUN_DRV_R
    Field FUN_DRV reader - Select the drive strength of the pad. A higher value corresponds with a higher strength. For GPIO34-39, FUN_DRV is always 0. For detailed drive strength, please see note 8 in Table ”Notes on ESP32 Pin Lists”, in ESP32 Datasheet.
  • FUN_DRV_W
    Field FUN_DRV writer - Select the drive strength of the pad. A higher value corresponds with a higher strength. For GPIO34-39, FUN_DRV is always 0. For detailed drive strength, please see note 8 in Table ”Notes on ESP32 Pin Lists”, in ESP32 Datasheet.
  • FUN_IE_R
    Field FUN_IE reader - Input enable of the pad. 1: input enabled; 0: input disabled.
  • FUN_IE_W
    Field FUN_IE writer - Input enable of the pad. 1: input enabled; 0: input disabled.
  • FUN_WPD_R
    Field FUN_WPD reader - Pull-down enable of the pad. 1: internal pull-down enabled, 0: internal pull-down disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull-down circuitry, therefore, their FUN_WPD is always 0.
  • FUN_WPD_W
    Field FUN_WPD writer - Pull-down enable of the pad. 1: internal pull-down enabled, 0: internal pull-down disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull-down circuitry, therefore, their FUN_WPD is always 0.
  • FUN_WPU_R
    Field FUN_WPU reader - Pull-up enable of the pad. 1: internal pull-up enabled; 0: internal pull-up disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull- down circuitry, therefore, their FUN_WPU is always 0.
  • FUN_WPU_W
    Field FUN_WPU writer - Pull-up enable of the pad. 1: internal pull-up enabled; 0: internal pull-up disabled. GPIO pins 34-39 are input-only. These pins do not feature an output driver or internal pull- up/pull- down circuitry, therefore, their FUN_WPU is always 0.
  • MCU_DRV_R
    Field MCU_DRV reader - Select the drive strength of the pad during sleep mode. A higher value corresponds with a higher strength.
  • MCU_DRV_W
    Field MCU_DRV writer - Select the drive strength of the pad during sleep mode. A higher value corresponds with a higher strength.
  • MCU_IE_R
    Field MCU_IE reader - Input enable of the pad during sleep mode. 1: input enabled; 0: input disabled.
  • MCU_IE_W
    Field MCU_IE writer - Input enable of the pad during sleep mode. 1: input enabled; 0: input disabled.
  • MCU_OE_R
    Field MCU_OE reader - Output enable of the pad in sleep mode. 1: enable output; 0: disable output.
  • MCU_OE_W
    Field MCU_OE writer - Output enable of the pad in sleep mode. 1: enable output; 0: disable output.
  • MCU_SEL_R
    Field MCU_SEL reader - Select the IO_MUX function for this signal. 0 selects Function 0, 1 selects Function 1, etc.
  • MCU_SEL_W
    Field MCU_SEL writer - Select the IO_MUX function for this signal. 0 selects Function 0, 1 selects Function 1, etc.
  • MCU_WPD_R
    Field MCU_WPD reader - Pull-down enable of the pad during sleep mode. 1: internal pull-down enabled; 0: internal pull-down disabled.
  • MCU_WPD_W
    Field MCU_WPD writer - Pull-down enable of the pad during sleep mode. 1: internal pull-down enabled; 0: internal pull-down disabled.
  • MCU_WPU_R
    Field MCU_WPU reader - Pull-up enable of the pad during sleep mode. 1: internal pull-up enabled; 0: internal pull-up disabled.
  • MCU_WPU_W
    Field MCU_WPU writer - Pull-up enable of the pad during sleep mode. 1: internal pull-up enabled; 0: internal pull-up disabled.
  • SLP_SEL_R
    Field SLP_SEL reader - Sleep mode selection of this pad. Set to 1 to put the pad in sleep mode.
  • SLP_SEL_W
    Field SLP_SEL writer - Sleep mode selection of this pad. Set to 1 to put the pad in sleep mode.