Type Definition esp32::rmt::rmt_int_raw_reg::R

type R = R<u32, RMT_INT_RAW_REG>;

Reader of register RMT_INT_RAW_REG

Methods

impl R

pub fn rmt_ch7_tx_thr_event_int_raw(&self) -> RMT_CH7_TX_THR_EVENT_INT_RAW_R

Bit 31 - The interrupt raw bit for channel7 turns to high level when transmitter in channle 7 have send datas more than reg_rmt_tx_lim_ch7 after detecting this interrupt software can updata the old datas with new datas.

pub fn rmt_ch6_tx_thr_event_int_raw(&self) -> RMT_CH6_TX_THR_EVENT_INT_RAW_R

Bit 30 - The interrupt raw bit for channel 6 turns to high level when transmitter in channle6 have send datas more than reg_rmt_tx_lim_ch6 after detecting this interrupt software can updata the old datas with new datas.

pub fn rmt_ch5_tx_thr_event_int_raw(&self) -> RMT_CH5_TX_THR_EVENT_INT_RAW_R

Bit 29 - The interrupt raw bit for channel 5 turns to high level when transmitter in channle5 have send datas more than reg_rmt_tx_lim_ch5 after detecting this interrupt software can updata the old datas with new datas.

pub fn rmt_ch4_tx_thr_event_int_raw(&self) -> RMT_CH4_TX_THR_EVENT_INT_RAW_R

Bit 28 - The interrupt raw bit for channel 4 turns to high level when transmitter in channle4 have send datas more than reg_rmt_tx_lim_ch4 after detecting this interrupt software can updata the old datas with new datas.

pub fn rmt_ch3_tx_thr_event_int_raw(&self) -> RMT_CH3_TX_THR_EVENT_INT_RAW_R

Bit 27 - The interrupt raw bit for channel 3 turns to high level when transmitter in channle3 have send datas more than reg_rmt_tx_lim_ch3 after detecting this interrupt software can updata the old datas with new datas.

pub fn rmt_ch2_tx_thr_event_int_raw(&self) -> RMT_CH2_TX_THR_EVENT_INT_RAW_R

Bit 26 - The interrupt raw bit for channel 2 turns to high level when transmitter in channle2 have send datas more than reg_rmt_tx_lim_ch2 after detecting this interrupt software can updata the old datas with new datas.

pub fn rmt_ch1_tx_thr_event_int_raw(&self) -> RMT_CH1_TX_THR_EVENT_INT_RAW_R

Bit 25 - The interrupt raw bit for channel 1 turns to high level when transmitter in channle1 have send datas more than reg_rmt_tx_lim_ch1 after detecting this interrupt software can updata the old datas with new datas.

pub fn rmt_ch0_tx_thr_event_int_raw(&self) -> RMT_CH0_TX_THR_EVENT_INT_RAW_R

Bit 24 - The interrupt raw bit for channel 0 turns to high level when transmitter in channle0 have send datas more than reg_rmt_tx_lim_ch0 after detecting this interrupt software can updata the old datas with new datas.

pub fn rmt_ch7_err_int_raw(&self) -> RMT_CH7_ERR_INT_RAW_R

Bit 23 - The interrupt raw bit for channel 7 turns to high level when channle 7 detects some errors.

pub fn rmt_ch7_rx_end_int_raw(&self) -> RMT_CH7_RX_END_INT_RAW_R

Bit 22 - The interrupt raw bit for channel 7 turns to high level when the receive process is done.

pub fn rmt_ch7_tx_end_int_raw(&self) -> RMT_CH7_TX_END_INT_RAW_R

Bit 21 - The interrupt raw bit for channel 7 turns to high level when the transmit process is done.

pub fn rmt_ch6_err_int_raw(&self) -> RMT_CH6_ERR_INT_RAW_R

Bit 20 - The interrupt raw bit for channel 6 turns to high level when channle 6 detects some errors.

pub fn rmt_ch6_rx_end_int_raw(&self) -> RMT_CH6_RX_END_INT_RAW_R

Bit 19 - The interrupt raw bit for channel 6 turns to high level when the receive process is done.

pub fn rmt_ch6_tx_end_int_raw(&self) -> RMT_CH6_TX_END_INT_RAW_R

Bit 18 - The interrupt raw bit for channel 6 turns to high level when the transmit process is done.

pub fn rmt_ch5_err_int_raw(&self) -> RMT_CH5_ERR_INT_RAW_R

Bit 17 - The interrupt raw bit for channel 5 turns to high level when channle 5 detects some errors.

pub fn rmt_ch5_rx_end_int_raw(&self) -> RMT_CH5_RX_END_INT_RAW_R

Bit 16 - The interrupt raw bit for channel 5 turns to high level when the receive process is done.

pub fn rmt_ch5_tx_end_int_raw(&self) -> RMT_CH5_TX_END_INT_RAW_R

Bit 15 - The interrupt raw bit for channel 5 turns to high level when the transmit process is done.

pub fn rmt_ch4_err_int_raw(&self) -> RMT_CH4_ERR_INT_RAW_R

Bit 14 - The interrupt raw bit for channel 4 turns to high level when channle 4 detects some errors.

pub fn rmt_ch4_rx_end_int_raw(&self) -> RMT_CH4_RX_END_INT_RAW_R

Bit 13 - The interrupt raw bit for channel 4 turns to high level when the receive process is done.

pub fn rmt_ch4_tx_end_int_raw(&self) -> RMT_CH4_TX_END_INT_RAW_R

Bit 12 - The interrupt raw bit for channel 4 turns to high level when the transmit process is done.

pub fn rmt_ch3_err_int_raw(&self) -> RMT_CH3_ERR_INT_RAW_R

Bit 11 - The interrupt raw bit for channel 3 turns to high level when channle 3 detects some errors.

pub fn rmt_ch3_rx_end_int_raw(&self) -> RMT_CH3_RX_END_INT_RAW_R

Bit 10 - The interrupt raw bit for channel 3 turns to high level when the receive process is done.

pub fn rmt_ch3_tx_end_int_raw(&self) -> RMT_CH3_TX_END_INT_RAW_R

Bit 9 - The interrupt raw bit for channel 3 turns to high level when the transmit process is done.

pub fn rmt_ch2_err_int_raw(&self) -> RMT_CH2_ERR_INT_RAW_R

Bit 8 - The interrupt raw bit for channel 2 turns to high level when channle 2 detects some errors.

pub fn rmt_ch2_rx_end_int_raw(&self) -> RMT_CH2_RX_END_INT_RAW_R

Bit 7 - The interrupt raw bit for channel 2 turns to high level when the receive process is done.

pub fn rmt_ch2_tx_end_int_raw(&self) -> RMT_CH2_TX_END_INT_RAW_R

Bit 6 - The interrupt raw bit for channel 2 turns to high level when the transmit process is done.

pub fn rmt_ch1_err_int_raw(&self) -> RMT_CH1_ERR_INT_RAW_R

Bit 5 - The interrupt raw bit for channel 1 turns to high level when channle 1 detects some errors.

pub fn rmt_ch1_rx_end_int_raw(&self) -> RMT_CH1_RX_END_INT_RAW_R

Bit 4 - The interrupt raw bit for channel 1 turns to high level when the receive process is done.

pub fn rmt_ch1_tx_end_int_raw(&self) -> RMT_CH1_TX_END_INT_RAW_R

Bit 3 - The interrupt raw bit for channel 1 turns to high level when the transmit process is done.

pub fn rmt_ch0_err_int_raw(&self) -> RMT_CH0_ERR_INT_RAW_R

Bit 2 - The interrupt raw bit for channel 0 turns to high level when channle 0 detects some errors.

pub fn rmt_ch0_rx_end_int_raw(&self) -> RMT_CH0_RX_END_INT_RAW_R

Bit 1 - The interrupt raw bit for channel 0 turns to high level when the receive process is done.

pub fn rmt_ch0_tx_end_int_raw(&self) -> RMT_CH0_TX_END_INT_RAW_R

Bit 0 - The interrupt raw bit for channel 0 turns to high level when the transmit process is done.