[−][src]Type Definition esp32::ledc::ledc_lsch4_conf1_reg::R
type R = R<u32, LEDC_LSCH4_CONF1_REG>;
Reader of register LEDC_LSCH4_CONF1_REG
Methods
impl R
[src]
pub fn ledc_duty_start_lsch4(&self) -> LEDC_DUTY_START_LSCH4_R
[src]
Bit 31 - When reg_duty_num_hsch4 reg_duty_cycle_hsch4 and reg_duty_scale_hsch4 has been configured. these register won't take effect until set reg_duty_start_hsch4. this bit is automatically cleared by hardware.
pub fn ledc_duty_inc_lsch4(&self) -> LEDC_DUTY_INC_LSCH4_R
[src]
Bit 30 - This register is used to increase the duty of output signal or decrease the duty of output signal for low speed channel4.
pub fn ledc_duty_num_lsch4(&self) -> LEDC_DUTY_NUM_LSCH4_R
[src]
Bits 20:29 - This register is used to control the num of increased or decreased times for low speed channel4.
pub fn ledc_duty_cycle_lsch4(&self) -> LEDC_DUTY_CYCLE_LSCH4_R
[src]
Bits 10:19 - This register is used to increase or decrease the duty every reg_duty_cycle_lsch4 cycles for low speed channel4.
pub fn ledc_duty_scale_lsch4(&self) -> LEDC_DUTY_SCALE_LSCH4_R
[src]
Bits 0:9 - This register controls the increase or decrease step scale for low speed channel4.