Type Definition esp32::ledc::ledc_hsch4_conf1_reg::R

type R = R<u32, LEDC_HSCH4_CONF1_REG>;

Reader of register LEDC_HSCH4_CONF1_REG

Methods

impl R

pub fn ledc_duty_start_hsch4(&self) -> LEDC_DUTY_START_HSCH4_R

Bit 31 - When reg_duty_num_hsch1 reg_duty_cycle_hsch1 and reg_duty_scale_hsch1 has been configured. these register won't take effect until set reg_duty_start_hsch1. this bit is automatically cleared by hardware.

pub fn ledc_duty_inc_hsch4(&self) -> LEDC_DUTY_INC_HSCH4_R

Bit 30 - This register is used to increase the duty of output signal or decrease the duty of output signal for high speed channel4.

pub fn ledc_duty_num_hsch4(&self) -> LEDC_DUTY_NUM_HSCH4_R

Bits 20:29 - This register is used to control the num of increased or decreased times for high speed channel1.

pub fn ledc_duty_cycle_hsch4(&self) -> LEDC_DUTY_CYCLE_HSCH4_R

Bits 10:19 - This register is used to increase or decrease the duty every reg_duty_cycle_hsch4 cycles for high speed channel4.

pub fn ledc_duty_scale_hsch4(&self) -> LEDC_DUTY_SCALE_HSCH4_R

Bits 0:9 - This register controls the increase or decrease step scale for high speed channel4.