Module esp32_hal::pac::ledc::lsch_conf1

Expand description

Structs

LSCH_CONF1_SPEC

This register you can read, write_with_zero, reset, write, modify. See API.

R

Register LSCH%s_CONF1 reader

W

Register LSCH%s_CONF1 writer

Type Definitions

DUTY_CYCLE_R

Field DUTY_CYCLE reader - This register is used to increase or decrease the duty every reg_duty_cycle_lsch0 cycles for low speed channel0.

DUTY_CYCLE_W

Field DUTY_CYCLE writer - This register is used to increase or decrease the duty every reg_duty_cycle_lsch0 cycles for low speed channel0.

DUTY_INC_R

Field DUTY_INC reader - This register is used to increase the duty of output signal or decrease the duty of output signal for low speed channel6.

DUTY_INC_W

Field DUTY_INC writer - This register is used to increase the duty of output signal or decrease the duty of output signal for low speed channel6.

DUTY_NUM_R

Field DUTY_NUM reader - This register is used to control the num of increased or decreased times for low speed channel6.

DUTY_NUM_W

Field DUTY_NUM writer - This register is used to control the num of increased or decreased times for low speed channel6.

DUTY_SCALE_R

Field DUTY_SCALE reader - This register controls the increase or decrease step scale for low speed channel0.

DUTY_SCALE_W

Field DUTY_SCALE writer - This register controls the increase or decrease step scale for low speed channel0.

DUTY_START_R

Field DUTY_START reader - When reg_duty_num_hsch1 reg_duty_cycle_hsch1 and reg_duty_scale_hsch1 has been configured. these register won’t take effect until set reg_duty_start_hsch1. this bit is automatically cleared by hardware.

DUTY_START_W

Field DUTY_START writer - When reg_duty_num_hsch1 reg_duty_cycle_hsch1 and reg_duty_scale_hsch1 has been configured. these register won’t take effect until set reg_duty_start_hsch1. this bit is automatically cleared by hardware.