esp_hal/interrupt/

mod.rs

//! # Interrupt support
//!
//! ## Overview
//! This module routes one or more peripheral interrupt sources to any one
//! of the CPU’s peripheral interrupts.
//!
//! ## Configuration
//! Usually peripheral drivers offer a mechanism to register your interrupt
//! handler. e.g. the systimer offers `set_interrupt_handler` to register a
//! handler for a specific alarm. Other drivers might take an interrupt handler
//! as an optional parameter to their constructor.
//!
//! This is the preferred way to register handlers.
//!
//! There are additional ways to register interrupt handlers which are generally
//! only meant to be used in very special situations (mostly internal to the HAL
//! or the supporting libraries). Those are outside the scope of this
//! documentation.
//!
//! It is even possible, but not recommended, to bind an interrupt directly to a
//! CPU interrupt. This can offer lower latency, at the cost of more complexity
//! in the interrupt handler. See the `direct_vectoring.rs` example
//!
//! We reserve a number of CPU interrupts, which cannot be used; see
//! [`RESERVED_INTERRUPTS`].
//!
//! ## Example
//!
//! ### Using the peripheral driver to register an interrupt handler
//!
//! ```rust, no_run
#![doc = crate::before_snippet!()]
//! let mut sw_int =
//!     SoftwareInterruptControl::new(peripherals.SW_INTERRUPT);
//! critical_section::with(|cs| {
//!     sw_int
//!         .software_interrupt0
//!         .set_interrupt_handler(swint0_handler);
//!     SWINT0
//!         .borrow_ref_mut(cs)
//!         .replace(sw_int.software_interrupt0);
//! });
//!
//! critical_section::with(|cs| {
//!     SWINT0.borrow_ref(cs).as_ref().unwrap().raise();
//! });
//! #
//! # loop {}
//! # }
//!
//! # use core::cell::RefCell;
//! #
//! # use critical_section::Mutex;
//! # use esp_hal::interrupt::software::{SoftwareInterrupt, SoftwareInterruptControl};
//! # use esp_hal::interrupt::Priority;
//! # use esp_hal::interrupt::InterruptHandler;
//! #
//! static SWINT0: Mutex<RefCell<Option<SoftwareInterrupt<0>>>> =
//!     Mutex::new(RefCell::new(None));
//!
//! #[handler(priority = Priority::Priority1)]
//! fn swint0_handler() {
//!     // esp_println::println!("SW interrupt0");
//!     critical_section::with(|cs| {
//!         SWINT0.borrow_ref(cs).as_ref().unwrap().reset();
//!     });
//! }
//! ```

use core::ops::BitAnd;

#[cfg(riscv)]
pub use self::riscv::*;
#[cfg(xtensa)]
pub use self::xtensa::*;

#[cfg(riscv)]
mod riscv;
#[cfg(xtensa)]
mod xtensa;

pub mod software;

/// An interrupt handler
#[cfg_attr(
    multi_core,
    doc = "**Note**: Interrupts are handled on the core they were setup on, if a driver is initialized on core 0, and moved to core 1, core 0 will still handle the interrupt."
)]
#[derive(Copy, Clone, Debug, PartialEq, Eq)]
pub struct InterruptHandler {
    f: extern "C" fn(),
    prio: Priority,
}

impl InterruptHandler {
    /// Creates a new [InterruptHandler] which will call the given function at
    /// the given priority.
    pub const fn new(f: extern "C" fn(), prio: Priority) -> Self {
        Self { f, prio }
    }

    /// The function to be called
    #[inline]
    pub fn handler(&self) -> extern "C" fn() {
        self.f
    }

    /// Priority to be used when registering the interrupt
    #[inline]
    pub fn priority(&self) -> Priority {
        self.prio
    }
}

#[cfg(large_intr_status)]
const STATUS_WORDS: usize = 3;

#[cfg(very_large_intr_status)]
const STATUS_WORDS: usize = 4;

#[cfg(not(any(large_intr_status, very_large_intr_status)))]
const STATUS_WORDS: usize = 2;

/// Representation of peripheral-interrupt status bits.
#[derive(Clone, Copy, Default, Debug)]
pub struct InterruptStatus {
    status: [u32; STATUS_WORDS],
}

impl InterruptStatus {
    const fn empty() -> Self {
        InterruptStatus {
            status: [0u32; STATUS_WORDS],
        }
    }

    #[cfg(large_intr_status)]
    const fn from(w0: u32, w1: u32, w2: u32) -> Self {
        Self {
            status: [w0, w1, w2],
        }
    }

    #[cfg(very_large_intr_status)]
    const fn from(w0: u32, w1: u32, w2: u32, w3: u32) -> Self {
        Self {
            status: [w0, w1, w2, w3],
        }
    }

    #[cfg(not(any(large_intr_status, very_large_intr_status)))]
    const fn from(w0: u32, w1: u32) -> Self {
        Self { status: [w0, w1] }
    }

    /// Is the given interrupt bit set
    pub fn is_set(&self, interrupt: u16) -> bool {
        (self.status[interrupt as usize / 32] & (1 << (interrupt as u32 % 32))) != 0
    }

    /// Set the given interrupt status bit
    pub fn set(&mut self, interrupt: u16) {
        self.status[interrupt as usize / 32] |= 1 << (interrupt as u32 % 32);
    }

    /// Return an iterator over the set interrupt status bits
    pub fn iterator(&self) -> InterruptStatusIterator {
        InterruptStatusIterator {
            status: *self,
            idx: 0,
        }
    }
}

impl BitAnd for InterruptStatus {
    type Output = InterruptStatus;

    fn bitand(self, rhs: Self) -> Self::Output {
        #[cfg(large_intr_status)]
        return Self::Output {
            status: [
                self.status[0] & rhs.status[0],
                self.status[1] & rhs.status[1],
                self.status[2] & rhs.status[2],
            ],
        };

        #[cfg(very_large_intr_status)]
        return Self::Output {
            status: [
                self.status[0] & rhs.status[0],
                self.status[1] & rhs.status[1],
                self.status[2] & rhs.status[2],
                self.status[3] & rhs.status[3],
            ],
        };

        #[cfg(not(any(large_intr_status, very_large_intr_status)))]
        return Self::Output {
            status: [
                self.status[0] & rhs.status[0],
                self.status[1] & rhs.status[1],
            ],
        };
    }
}

/// Iterator over set interrupt status bits
pub struct InterruptStatusIterator {
    status: InterruptStatus,
    idx: usize,
}

impl Iterator for InterruptStatusIterator {
    type Item = u8;

    fn next(&mut self) -> Option<Self::Item> {
        for i in self.idx..STATUS_WORDS {
            if self.status.status[i] != 0 {
                let bit = self.status.status[i].trailing_zeros();
                self.idx = i;
                self.status.status[i] &= !1 << bit;
                return Some((bit + 32 * i as u32) as u8);
            }
        }
        self.idx = usize::MAX;
        None
    }
}