1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89

//! # Peripheral Instances
//!
//! This module creates singleton instances for each of the various peripherals,
//! and re-exports them to allow users to access and use them in their
//! applications.
//!
//! Should be noted that that the module also re-exports the [Interrupt] enum
//! from the PAC, allowing users to handle interrupts associated with these
//! peripherals.

use esp32c6 as pac;
// We need to export this for users to use
pub use pac::Interrupt;

// We need to export this in the hal for the drivers to use
pub(crate) use self::peripherals::*;

// Note that certain are marked with `virtual` in the invocation of the
// `peripherals!` macro below. Basically, this indicates there's no physical
// peripheral (no `PSRAM`, `RADIO`, etc. peripheral in the PACs), so we're
// creating "virtual peripherals" for them.
crate::peripherals! {
    ADC1 <= virtual,
    AES <= AES,
    ASSIST_DEBUG <= ASSIST_DEBUG,
    ATOMIC <= ATOMIC,
    BT <= virtual,
    DMA <= DMA,
    DS <= DS,
    ECC <= ECC,
    EFUSE <= EFUSE,
    EXTMEM <= EXTMEM,
    GPIO <= GPIO,
    GPIO_SD <= GPIO_SD,
    HINF <= HINF,
    HMAC <= HMAC,
    HP_APM <= HP_APM,
    HP_SYS <= HP_SYS,
    I2C0 <= I2C0,
    I2S0 <= I2S0,
    IEEE802154 <= virtual,
    INTERRUPT_CORE0 <= INTERRUPT_CORE0,
    INTPRI <= INTPRI,
    IO_MUX <= IO_MUX,
    LEDC <= LEDC,
    LPWR <= LP_CLKRST,
    LP_CORE <= virtual,
    LP_PERI <= LP_PERI,
    LP_ANA <= LP_ANA,
    LP_AON <= LP_AON,
    LP_APM <= LP_APM,
    LP_APM0 <= LP_APM0,
    LP_I2C0 <= LP_I2C0,
    LP_I2C_ANA_MST <= LP_I2C_ANA_MST,
    LP_IO <= LP_IO,
    LP_TEE <= LP_TEE,
    LP_TIMER <= LP_TIMER,
    LP_UART <= LP_UART,
    LP_WDT <= LP_WDT,
    MCPWM0 <= MCPWM0,
    MEM_MONITOR <= MEM_MONITOR,
    OTP_DEBUG <= OTP_DEBUG,
    PARL_IO <= PARL_IO,
    PAU <= PAU,
    PCNT <= PCNT,
    PMU <= PMU,
    RMT <= RMT,
    RNG <= RNG,
    RSA <= RSA,
    SHA <= SHA,
    SLCHOST <= SLCHOST,
    SOC_ETM <= SOC_ETM,
    SPI0 <= SPI0,
    SPI1 <= SPI1,
    SPI2 <= SPI2,
    SYSTEM <= PCR,
    SYSTIMER <= SYSTIMER,
    TEE <= TEE,
    TIMG0 <= TIMG0,
    TIMG1 <= TIMG1,
    TRACE0 <= TRACE,
    TWAI0 <= TWAI0,
    TWAI1 <= TWAI1,
    UART0 <= UART0,
    UART1 <= UART1,
    UHCI0 <= UHCI0,
    USB_DEVICE <= USB_DEVICE,
    WIFI <= virtual,
}