Struct efr32x12p::cmu::hfxosteadystatectrl::W
[−]
[src]
pub struct W { /* fields omitted */ }
Value to write to the register
Methods
impl W
[src]
fn reset_value() -> W
[src]
Reset value of the register
unsafe fn bits(&mut self, bits: u32) -> &mut Self
[src]
Writes raw bits to the register
fn ibtrimxocore(&mut self) -> _IBTRIMXOCOREW
[src]
Bits 0:6 - Sets the steady state oscillator core bias current. Current (uA) = IBTRIMXOCORE x 40uA. Bits 6 and 5 may only be high in the crystal oscillator startup phase.
fn regish(&mut self) -> _REGISHW
[src]
Bits 7:10 - Sets the steady state regulator output current level (shunt regulator). Ish = 120uA + REGISH x 120uA
fn ctune(&mut self) -> _CTUNEW
[src]
Bits 11:19 - Sets oscillator tuning capacitance. Capacitance on HFXTAL_N and HFXTAL_P (pF) = Ctune = Cpar + CTUNE<8:0> x 40fF. Max Ctune 25pF (CLmax ~12.5pF). CL(DNLmax)=50fF ~ 0.6ppm (12.5ppm/pF)
fn regselilow(&mut self) -> _REGSELILOWW
[src]
Bits 24:25 - Controls regulator minimum shunt current detection relative to nominal
fn peakdeten(&mut self) -> _PEAKDETENW
[src]
Bit 26 - Enables oscillator peak detectors
fn regishupper(&mut self) -> _REGISHUPPERW
[src]
Bits 28:31 - Set regulator output current level (shunt regulator). Ish = 120uA + REGISHUPPER x 120uA