efm32tg11b_pac/efm32tg11b540/uart0/
txdoublex.rs

1#[doc = "Register `TXDOUBLEX` reader"]
2pub struct R(crate::R<TXDOUBLEX_SPEC>);
3impl core::ops::Deref for R {
4    type Target = crate::R<TXDOUBLEX_SPEC>;
5    #[inline(always)]
6    fn deref(&self) -> &Self::Target {
7        &self.0
8    }
9}
10impl From<crate::R<TXDOUBLEX_SPEC>> for R {
11    #[inline(always)]
12    fn from(reader: crate::R<TXDOUBLEX_SPEC>) -> Self {
13        R(reader)
14    }
15}
16#[doc = "Register `TXDOUBLEX` writer"]
17pub struct W(crate::W<TXDOUBLEX_SPEC>);
18impl core::ops::Deref for W {
19    type Target = crate::W<TXDOUBLEX_SPEC>;
20    #[inline(always)]
21    fn deref(&self) -> &Self::Target {
22        &self.0
23    }
24}
25impl core::ops::DerefMut for W {
26    #[inline(always)]
27    fn deref_mut(&mut self) -> &mut Self::Target {
28        &mut self.0
29    }
30}
31impl From<crate::W<TXDOUBLEX_SPEC>> for W {
32    #[inline(always)]
33    fn from(writer: crate::W<TXDOUBLEX_SPEC>) -> Self {
34        W(writer)
35    }
36}
37#[doc = "Field `TXDATA0` reader - TX Data"]
38pub type TXDATA0_R = crate::FieldReader<u16, u16>;
39#[doc = "Field `TXDATA0` writer - TX Data"]
40pub type TXDATA0_W<'a, const O: u8> = crate::FieldWriter<'a, u32, TXDOUBLEX_SPEC, u16, u16, 9, O>;
41#[doc = "Field `UBRXAT0` reader - Unblock RX After Transmission"]
42pub type UBRXAT0_R = crate::BitReader<bool>;
43#[doc = "Field `UBRXAT0` writer - Unblock RX After Transmission"]
44pub type UBRXAT0_W<'a, const O: u8> = crate::BitWriter<'a, u32, TXDOUBLEX_SPEC, bool, O>;
45#[doc = "Field `TXTRIAT0` reader - Set TXTRI After Transmission"]
46pub type TXTRIAT0_R = crate::BitReader<bool>;
47#[doc = "Field `TXTRIAT0` writer - Set TXTRI After Transmission"]
48pub type TXTRIAT0_W<'a, const O: u8> = crate::BitWriter<'a, u32, TXDOUBLEX_SPEC, bool, O>;
49#[doc = "Field `TXBREAK0` reader - Transmit Data as Break"]
50pub type TXBREAK0_R = crate::BitReader<bool>;
51#[doc = "Field `TXBREAK0` writer - Transmit Data as Break"]
52pub type TXBREAK0_W<'a, const O: u8> = crate::BitWriter<'a, u32, TXDOUBLEX_SPEC, bool, O>;
53#[doc = "Field `TXDISAT0` reader - Clear TXEN After Transmission"]
54pub type TXDISAT0_R = crate::BitReader<bool>;
55#[doc = "Field `TXDISAT0` writer - Clear TXEN After Transmission"]
56pub type TXDISAT0_W<'a, const O: u8> = crate::BitWriter<'a, u32, TXDOUBLEX_SPEC, bool, O>;
57#[doc = "Field `RXENAT0` reader - Enable RX After Transmission"]
58pub type RXENAT0_R = crate::BitReader<bool>;
59#[doc = "Field `RXENAT0` writer - Enable RX After Transmission"]
60pub type RXENAT0_W<'a, const O: u8> = crate::BitWriter<'a, u32, TXDOUBLEX_SPEC, bool, O>;
61#[doc = "Field `TXDATA1` reader - TX Data"]
62pub type TXDATA1_R = crate::FieldReader<u16, u16>;
63#[doc = "Field `TXDATA1` writer - TX Data"]
64pub type TXDATA1_W<'a, const O: u8> = crate::FieldWriter<'a, u32, TXDOUBLEX_SPEC, u16, u16, 9, O>;
65#[doc = "Field `UBRXAT1` reader - Unblock RX After Transmission"]
66pub type UBRXAT1_R = crate::BitReader<bool>;
67#[doc = "Field `UBRXAT1` writer - Unblock RX After Transmission"]
68pub type UBRXAT1_W<'a, const O: u8> = crate::BitWriter<'a, u32, TXDOUBLEX_SPEC, bool, O>;
69#[doc = "Field `TXTRIAT1` reader - Set TXTRI After Transmission"]
70pub type TXTRIAT1_R = crate::BitReader<bool>;
71#[doc = "Field `TXTRIAT1` writer - Set TXTRI After Transmission"]
72pub type TXTRIAT1_W<'a, const O: u8> = crate::BitWriter<'a, u32, TXDOUBLEX_SPEC, bool, O>;
73#[doc = "Field `TXBREAK1` reader - Transmit Data as Break"]
74pub type TXBREAK1_R = crate::BitReader<bool>;
75#[doc = "Field `TXBREAK1` writer - Transmit Data as Break"]
76pub type TXBREAK1_W<'a, const O: u8> = crate::BitWriter<'a, u32, TXDOUBLEX_SPEC, bool, O>;
77#[doc = "Field `TXDISAT1` reader - Clear TXEN After Transmission"]
78pub type TXDISAT1_R = crate::BitReader<bool>;
79#[doc = "Field `TXDISAT1` writer - Clear TXEN After Transmission"]
80pub type TXDISAT1_W<'a, const O: u8> = crate::BitWriter<'a, u32, TXDOUBLEX_SPEC, bool, O>;
81#[doc = "Field `RXENAT1` reader - Enable RX After Transmission"]
82pub type RXENAT1_R = crate::BitReader<bool>;
83#[doc = "Field `RXENAT1` writer - Enable RX After Transmission"]
84pub type RXENAT1_W<'a, const O: u8> = crate::BitWriter<'a, u32, TXDOUBLEX_SPEC, bool, O>;
85impl R {
86    #[doc = "Bits 0:8 - TX Data"]
87    #[inline(always)]
88    pub fn txdata0(&self) -> TXDATA0_R {
89        TXDATA0_R::new((self.bits & 0x01ff) as u16)
90    }
91    #[doc = "Bit 11 - Unblock RX After Transmission"]
92    #[inline(always)]
93    pub fn ubrxat0(&self) -> UBRXAT0_R {
94        UBRXAT0_R::new(((self.bits >> 11) & 1) != 0)
95    }
96    #[doc = "Bit 12 - Set TXTRI After Transmission"]
97    #[inline(always)]
98    pub fn txtriat0(&self) -> TXTRIAT0_R {
99        TXTRIAT0_R::new(((self.bits >> 12) & 1) != 0)
100    }
101    #[doc = "Bit 13 - Transmit Data as Break"]
102    #[inline(always)]
103    pub fn txbreak0(&self) -> TXBREAK0_R {
104        TXBREAK0_R::new(((self.bits >> 13) & 1) != 0)
105    }
106    #[doc = "Bit 14 - Clear TXEN After Transmission"]
107    #[inline(always)]
108    pub fn txdisat0(&self) -> TXDISAT0_R {
109        TXDISAT0_R::new(((self.bits >> 14) & 1) != 0)
110    }
111    #[doc = "Bit 15 - Enable RX After Transmission"]
112    #[inline(always)]
113    pub fn rxenat0(&self) -> RXENAT0_R {
114        RXENAT0_R::new(((self.bits >> 15) & 1) != 0)
115    }
116    #[doc = "Bits 16:24 - TX Data"]
117    #[inline(always)]
118    pub fn txdata1(&self) -> TXDATA1_R {
119        TXDATA1_R::new(((self.bits >> 16) & 0x01ff) as u16)
120    }
121    #[doc = "Bit 27 - Unblock RX After Transmission"]
122    #[inline(always)]
123    pub fn ubrxat1(&self) -> UBRXAT1_R {
124        UBRXAT1_R::new(((self.bits >> 27) & 1) != 0)
125    }
126    #[doc = "Bit 28 - Set TXTRI After Transmission"]
127    #[inline(always)]
128    pub fn txtriat1(&self) -> TXTRIAT1_R {
129        TXTRIAT1_R::new(((self.bits >> 28) & 1) != 0)
130    }
131    #[doc = "Bit 29 - Transmit Data as Break"]
132    #[inline(always)]
133    pub fn txbreak1(&self) -> TXBREAK1_R {
134        TXBREAK1_R::new(((self.bits >> 29) & 1) != 0)
135    }
136    #[doc = "Bit 30 - Clear TXEN After Transmission"]
137    #[inline(always)]
138    pub fn txdisat1(&self) -> TXDISAT1_R {
139        TXDISAT1_R::new(((self.bits >> 30) & 1) != 0)
140    }
141    #[doc = "Bit 31 - Enable RX After Transmission"]
142    #[inline(always)]
143    pub fn rxenat1(&self) -> RXENAT1_R {
144        RXENAT1_R::new(((self.bits >> 31) & 1) != 0)
145    }
146}
147impl W {
148    #[doc = "Bits 0:8 - TX Data"]
149    #[inline(always)]
150    #[must_use]
151    pub fn txdata0(&mut self) -> TXDATA0_W<0> {
152        TXDATA0_W::new(self)
153    }
154    #[doc = "Bit 11 - Unblock RX After Transmission"]
155    #[inline(always)]
156    #[must_use]
157    pub fn ubrxat0(&mut self) -> UBRXAT0_W<11> {
158        UBRXAT0_W::new(self)
159    }
160    #[doc = "Bit 12 - Set TXTRI After Transmission"]
161    #[inline(always)]
162    #[must_use]
163    pub fn txtriat0(&mut self) -> TXTRIAT0_W<12> {
164        TXTRIAT0_W::new(self)
165    }
166    #[doc = "Bit 13 - Transmit Data as Break"]
167    #[inline(always)]
168    #[must_use]
169    pub fn txbreak0(&mut self) -> TXBREAK0_W<13> {
170        TXBREAK0_W::new(self)
171    }
172    #[doc = "Bit 14 - Clear TXEN After Transmission"]
173    #[inline(always)]
174    #[must_use]
175    pub fn txdisat0(&mut self) -> TXDISAT0_W<14> {
176        TXDISAT0_W::new(self)
177    }
178    #[doc = "Bit 15 - Enable RX After Transmission"]
179    #[inline(always)]
180    #[must_use]
181    pub fn rxenat0(&mut self) -> RXENAT0_W<15> {
182        RXENAT0_W::new(self)
183    }
184    #[doc = "Bits 16:24 - TX Data"]
185    #[inline(always)]
186    #[must_use]
187    pub fn txdata1(&mut self) -> TXDATA1_W<16> {
188        TXDATA1_W::new(self)
189    }
190    #[doc = "Bit 27 - Unblock RX After Transmission"]
191    #[inline(always)]
192    #[must_use]
193    pub fn ubrxat1(&mut self) -> UBRXAT1_W<27> {
194        UBRXAT1_W::new(self)
195    }
196    #[doc = "Bit 28 - Set TXTRI After Transmission"]
197    #[inline(always)]
198    #[must_use]
199    pub fn txtriat1(&mut self) -> TXTRIAT1_W<28> {
200        TXTRIAT1_W::new(self)
201    }
202    #[doc = "Bit 29 - Transmit Data as Break"]
203    #[inline(always)]
204    #[must_use]
205    pub fn txbreak1(&mut self) -> TXBREAK1_W<29> {
206        TXBREAK1_W::new(self)
207    }
208    #[doc = "Bit 30 - Clear TXEN After Transmission"]
209    #[inline(always)]
210    #[must_use]
211    pub fn txdisat1(&mut self) -> TXDISAT1_W<30> {
212        TXDISAT1_W::new(self)
213    }
214    #[doc = "Bit 31 - Enable RX After Transmission"]
215    #[inline(always)]
216    #[must_use]
217    pub fn rxenat1(&mut self) -> RXENAT1_W<31> {
218        RXENAT1_W::new(self)
219    }
220    #[doc = "Writes raw bits to the register."]
221    #[inline(always)]
222    pub unsafe fn bits(&mut self, bits: u32) -> &mut Self {
223        self.0.bits(bits);
224        self
225    }
226}
227#[doc = "TX Buffer Double Data Extended Register\n\nThis register you can [`read`](crate::generic::Reg::read), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [txdoublex](index.html) module"]
228pub struct TXDOUBLEX_SPEC;
229impl crate::RegisterSpec for TXDOUBLEX_SPEC {
230    type Ux = u32;
231}
232#[doc = "`read()` method returns [txdoublex::R](R) reader structure"]
233impl crate::Readable for TXDOUBLEX_SPEC {
234    type Reader = R;
235}
236#[doc = "`write(|w| ..)` method takes [txdoublex::W](W) writer structure"]
237impl crate::Writable for TXDOUBLEX_SPEC {
238    type Writer = W;
239    const ZERO_TO_MODIFY_FIELDS_BITMAP: Self::Ux = 0;
240    const ONE_TO_MODIFY_FIELDS_BITMAP: Self::Ux = 0;
241}
242#[doc = "`reset()` method sets TXDOUBLEX to value 0"]
243impl crate::Resettable for TXDOUBLEX_SPEC {
244    const RESET_VALUE: Self::Ux = 0;
245}
efm32tg11b_pac/efm32tg11b540/uart0/txdoublex.rs

efm32tg11b_pac/efm32tg11b540/uart0/
txdoublex.rs
