efm32pg22_pac/efm32pg22c200/lfrco_s/
ien.rs

1#[doc = "Register `IEN` reader"]
2pub struct R(crate::R<IEN_SPEC>);
3impl core::ops::Deref for R {
4    type Target = crate::R<IEN_SPEC>;
5    #[inline(always)]
6    fn deref(&self) -> &Self::Target {
7        &self.0
8    }
9}
10impl From<crate::R<IEN_SPEC>> for R {
11    #[inline(always)]
12    fn from(reader: crate::R<IEN_SPEC>) -> Self {
13        R(reader)
14    }
15}
16#[doc = "Register `IEN` writer"]
17pub struct W(crate::W<IEN_SPEC>);
18impl core::ops::Deref for W {
19    type Target = crate::W<IEN_SPEC>;
20    #[inline(always)]
21    fn deref(&self) -> &Self::Target {
22        &self.0
23    }
24}
25impl core::ops::DerefMut for W {
26    #[inline(always)]
27    fn deref_mut(&mut self) -> &mut Self::Target {
28        &mut self.0
29    }
30}
31impl From<crate::W<IEN_SPEC>> for W {
32    #[inline(always)]
33    fn from(writer: crate::W<IEN_SPEC>) -> Self {
34        W(writer)
35    }
36}
37#[doc = "Field `RDY` reader - Ready Enable"]
38pub type RDY_R = crate::BitReader<bool>;
39#[doc = "Field `RDY` writer - Ready Enable"]
40pub type RDY_W<'a, const O: u8> = crate::BitWriter<'a, u32, IEN_SPEC, bool, O>;
41#[doc = "Field `POSEDGE` reader - Rising Edge Enable"]
42pub type POSEDGE_R = crate::BitReader<bool>;
43#[doc = "Field `POSEDGE` writer - Rising Edge Enable"]
44pub type POSEDGE_W<'a, const O: u8> = crate::BitWriter<'a, u32, IEN_SPEC, bool, O>;
45#[doc = "Field `NEGEDGE` reader - Falling Edge Enable"]
46pub type NEGEDGE_R = crate::BitReader<bool>;
47#[doc = "Field `NEGEDGE` writer - Falling Edge Enable"]
48pub type NEGEDGE_W<'a, const O: u8> = crate::BitWriter<'a, u32, IEN_SPEC, bool, O>;
49#[doc = "Field `TCDONE` reader - Temperature Check Done Enable"]
50pub type TCDONE_R = crate::BitReader<bool>;
51#[doc = "Field `TCDONE` writer - Temperature Check Done Enable"]
52pub type TCDONE_W<'a, const O: u8> = crate::BitWriter<'a, u32, IEN_SPEC, bool, O>;
53#[doc = "Field `CALDONE` reader - Calibration Done Enable"]
54pub type CALDONE_R = crate::BitReader<bool>;
55#[doc = "Field `CALDONE` writer - Calibration Done Enable"]
56pub type CALDONE_W<'a, const O: u8> = crate::BitWriter<'a, u32, IEN_SPEC, bool, O>;
57#[doc = "Field `TEMPCHANGE` reader - Temperature Change Enable"]
58pub type TEMPCHANGE_R = crate::BitReader<bool>;
59#[doc = "Field `TEMPCHANGE` writer - Temperature Change Enable"]
60pub type TEMPCHANGE_W<'a, const O: u8> = crate::BitWriter<'a, u32, IEN_SPEC, bool, O>;
61#[doc = "Field `SCHEDERR` reader - Scheduling Error Enable"]
62pub type SCHEDERR_R = crate::BitReader<bool>;
63#[doc = "Field `SCHEDERR` writer - Scheduling Error Enable"]
64pub type SCHEDERR_W<'a, const O: u8> = crate::BitWriter<'a, u32, IEN_SPEC, bool, O>;
65#[doc = "Field `TCOOR` reader - Temperature Check Out Of Range Enable"]
66pub type TCOOR_R = crate::BitReader<bool>;
67#[doc = "Field `TCOOR` writer - Temperature Check Out Of Range Enable"]
68pub type TCOOR_W<'a, const O: u8> = crate::BitWriter<'a, u32, IEN_SPEC, bool, O>;
69#[doc = "Field `CALOOR` reader - Calibration Out Of Range Enable"]
70pub type CALOOR_R = crate::BitReader<bool>;
71#[doc = "Field `CALOOR` writer - Calibration Out Of Range Enable"]
72pub type CALOOR_W<'a, const O: u8> = crate::BitWriter<'a, u32, IEN_SPEC, bool, O>;
73impl R {
74    #[doc = "Bit 0 - Ready Enable"]
75    #[inline(always)]
76    pub fn rdy(&self) -> RDY_R {
77        RDY_R::new((self.bits & 1) != 0)
78    }
79    #[doc = "Bit 1 - Rising Edge Enable"]
80    #[inline(always)]
81    pub fn posedge(&self) -> POSEDGE_R {
82        POSEDGE_R::new(((self.bits >> 1) & 1) != 0)
83    }
84    #[doc = "Bit 2 - Falling Edge Enable"]
85    #[inline(always)]
86    pub fn negedge(&self) -> NEGEDGE_R {
87        NEGEDGE_R::new(((self.bits >> 2) & 1) != 0)
88    }
89    #[doc = "Bit 8 - Temperature Check Done Enable"]
90    #[inline(always)]
91    pub fn tcdone(&self) -> TCDONE_R {
92        TCDONE_R::new(((self.bits >> 8) & 1) != 0)
93    }
94    #[doc = "Bit 9 - Calibration Done Enable"]
95    #[inline(always)]
96    pub fn caldone(&self) -> CALDONE_R {
97        CALDONE_R::new(((self.bits >> 9) & 1) != 0)
98    }
99    #[doc = "Bit 10 - Temperature Change Enable"]
100    #[inline(always)]
101    pub fn tempchange(&self) -> TEMPCHANGE_R {
102        TEMPCHANGE_R::new(((self.bits >> 10) & 1) != 0)
103    }
104    #[doc = "Bit 16 - Scheduling Error Enable"]
105    #[inline(always)]
106    pub fn schederr(&self) -> SCHEDERR_R {
107        SCHEDERR_R::new(((self.bits >> 16) & 1) != 0)
108    }
109    #[doc = "Bit 17 - Temperature Check Out Of Range Enable"]
110    #[inline(always)]
111    pub fn tcoor(&self) -> TCOOR_R {
112        TCOOR_R::new(((self.bits >> 17) & 1) != 0)
113    }
114    #[doc = "Bit 18 - Calibration Out Of Range Enable"]
115    #[inline(always)]
116    pub fn caloor(&self) -> CALOOR_R {
117        CALOOR_R::new(((self.bits >> 18) & 1) != 0)
118    }
119}
120impl W {
121    #[doc = "Bit 0 - Ready Enable"]
122    #[inline(always)]
123    #[must_use]
124    pub fn rdy(&mut self) -> RDY_W<0> {
125        RDY_W::new(self)
126    }
127    #[doc = "Bit 1 - Rising Edge Enable"]
128    #[inline(always)]
129    #[must_use]
130    pub fn posedge(&mut self) -> POSEDGE_W<1> {
131        POSEDGE_W::new(self)
132    }
133    #[doc = "Bit 2 - Falling Edge Enable"]
134    #[inline(always)]
135    #[must_use]
136    pub fn negedge(&mut self) -> NEGEDGE_W<2> {
137        NEGEDGE_W::new(self)
138    }
139    #[doc = "Bit 8 - Temperature Check Done Enable"]
140    #[inline(always)]
141    #[must_use]
142    pub fn tcdone(&mut self) -> TCDONE_W<8> {
143        TCDONE_W::new(self)
144    }
145    #[doc = "Bit 9 - Calibration Done Enable"]
146    #[inline(always)]
147    #[must_use]
148    pub fn caldone(&mut self) -> CALDONE_W<9> {
149        CALDONE_W::new(self)
150    }
151    #[doc = "Bit 10 - Temperature Change Enable"]
152    #[inline(always)]
153    #[must_use]
154    pub fn tempchange(&mut self) -> TEMPCHANGE_W<10> {
155        TEMPCHANGE_W::new(self)
156    }
157    #[doc = "Bit 16 - Scheduling Error Enable"]
158    #[inline(always)]
159    #[must_use]
160    pub fn schederr(&mut self) -> SCHEDERR_W<16> {
161        SCHEDERR_W::new(self)
162    }
163    #[doc = "Bit 17 - Temperature Check Out Of Range Enable"]
164    #[inline(always)]
165    #[must_use]
166    pub fn tcoor(&mut self) -> TCOOR_W<17> {
167        TCOOR_W::new(self)
168    }
169    #[doc = "Bit 18 - Calibration Out Of Range Enable"]
170    #[inline(always)]
171    #[must_use]
172    pub fn caloor(&mut self) -> CALOOR_W<18> {
173        CALOOR_W::new(self)
174    }
175    #[doc = "Writes raw bits to the register."]
176    #[inline(always)]
177    pub unsafe fn bits(&mut self, bits: u32) -> &mut Self {
178        self.0.bits(bits);
179        self
180    }
181}
182#[doc = "Interrupt enable register\n\nThis register you can [`read`](crate::generic::Reg::read), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [ien](index.html) module"]
183pub struct IEN_SPEC;
184impl crate::RegisterSpec for IEN_SPEC {
185    type Ux = u32;
186}
187#[doc = "`read()` method returns [ien::R](R) reader structure"]
188impl crate::Readable for IEN_SPEC {
189    type Reader = R;
190}
191#[doc = "`write(|w| ..)` method takes [ien::W](W) writer structure"]
192impl crate::Writable for IEN_SPEC {
193    type Writer = W;
194    const ZERO_TO_MODIFY_FIELDS_BITMAP: Self::Ux = 0;
195    const ONE_TO_MODIFY_FIELDS_BITMAP: Self::Ux = 0;
196}
197#[doc = "`reset()` method sets IEN to value 0"]
198impl crate::Resettable for IEN_SPEC {
199    const RESET_VALUE: Self::Ux = 0;
200}
efm32pg22_pac/efm32pg22c200/lfrco_s/ien.rs

efm32pg22_pac/efm32pg22c200/lfrco_s/
ien.rs
