efm32pg1b200_pac/adc0/
cal.rs

1#[doc = "Register `CAL` reader"]
2pub struct R(crate::R<CAL_SPEC>);
3impl core::ops::Deref for R {
4    type Target = crate::R<CAL_SPEC>;
5    #[inline(always)]
6    fn deref(&self) -> &Self::Target {
7        &self.0
8    }
9}
10impl From<crate::R<CAL_SPEC>> for R {
11    #[inline(always)]
12    fn from(reader: crate::R<CAL_SPEC>) -> Self {
13        R(reader)
14    }
15}
16#[doc = "Register `CAL` writer"]
17pub struct W(crate::W<CAL_SPEC>);
18impl core::ops::Deref for W {
19    type Target = crate::W<CAL_SPEC>;
20    #[inline(always)]
21    fn deref(&self) -> &Self::Target {
22        &self.0
23    }
24}
25impl core::ops::DerefMut for W {
26    #[inline(always)]
27    fn deref_mut(&mut self) -> &mut Self::Target {
28        &mut self.0
29    }
30}
31impl From<crate::W<CAL_SPEC>> for W {
32    #[inline(always)]
33    fn from(writer: crate::W<CAL_SPEC>) -> Self {
34        W(writer)
35    }
36}
37#[doc = "Field `SINGLEOFFSET` reader - Single Mode Offset Calibration Value for Differential or Positive Single-ended Mode"]
38pub type SINGLEOFFSET_R = crate::FieldReader<u8, u8>;
39#[doc = "Field `SINGLEOFFSET` writer - Single Mode Offset Calibration Value for Differential or Positive Single-ended Mode"]
40pub type SINGLEOFFSET_W<'a> = crate::FieldWriter<'a, u32, CAL_SPEC, u8, u8, 4, 0>;
41#[doc = "Field `SINGLEOFFSETINV` reader - Single Mode Offset Calibration Value for Negative Single-ended Mode"]
42pub type SINGLEOFFSETINV_R = crate::FieldReader<u8, u8>;
43#[doc = "Field `SINGLEOFFSETINV` writer - Single Mode Offset Calibration Value for Negative Single-ended Mode"]
44pub type SINGLEOFFSETINV_W<'a> = crate::FieldWriter<'a, u32, CAL_SPEC, u8, u8, 4, 4>;
45#[doc = "Field `SINGLEGAIN` reader - Single Mode Gain Calibration Value"]
46pub type SINGLEGAIN_R = crate::FieldReader<u8, u8>;
47#[doc = "Field `SINGLEGAIN` writer - Single Mode Gain Calibration Value"]
48pub type SINGLEGAIN_W<'a> = crate::FieldWriter<'a, u32, CAL_SPEC, u8, u8, 7, 8>;
49#[doc = "Field `OFFSETINVMODE` reader - Negative Single-ended Offset Calibration is Enabled"]
50pub type OFFSETINVMODE_R = crate::BitReader<bool>;
51#[doc = "Field `OFFSETINVMODE` writer - Negative Single-ended Offset Calibration is Enabled"]
52pub type OFFSETINVMODE_W<'a> = crate::BitWriter<'a, u32, CAL_SPEC, bool, 15>;
53#[doc = "Field `SCANOFFSET` reader - Scan Mode Offset Calibration Value for Differential or Positive Single-ended Mode"]
54pub type SCANOFFSET_R = crate::FieldReader<u8, u8>;
55#[doc = "Field `SCANOFFSET` writer - Scan Mode Offset Calibration Value for Differential or Positive Single-ended Mode"]
56pub type SCANOFFSET_W<'a> = crate::FieldWriter<'a, u32, CAL_SPEC, u8, u8, 4, 16>;
57#[doc = "Field `SCANOFFSETINV` reader - Scan Mode Offset Calibration Value for Negative Single-ended Mode"]
58pub type SCANOFFSETINV_R = crate::FieldReader<u8, u8>;
59#[doc = "Field `SCANOFFSETINV` writer - Scan Mode Offset Calibration Value for Negative Single-ended Mode"]
60pub type SCANOFFSETINV_W<'a> = crate::FieldWriter<'a, u32, CAL_SPEC, u8, u8, 4, 20>;
61#[doc = "Field `SCANGAIN` reader - Scan Mode Gain Calibration Value"]
62pub type SCANGAIN_R = crate::FieldReader<u8, u8>;
63#[doc = "Field `SCANGAIN` writer - Scan Mode Gain Calibration Value"]
64pub type SCANGAIN_W<'a> = crate::FieldWriter<'a, u32, CAL_SPEC, u8, u8, 7, 24>;
65#[doc = "Field `CALEN` reader - Calibration Mode is Enabled"]
66pub type CALEN_R = crate::BitReader<bool>;
67#[doc = "Field `CALEN` writer - Calibration Mode is Enabled"]
68pub type CALEN_W<'a> = crate::BitWriter<'a, u32, CAL_SPEC, bool, 31>;
69impl R {
70    #[doc = "Bits 0:3 - Single Mode Offset Calibration Value for Differential or Positive Single-ended Mode"]
71    #[inline(always)]
72    pub fn singleoffset(&self) -> SINGLEOFFSET_R {
73        SINGLEOFFSET_R::new((self.bits & 0x0f) as u8)
74    }
75    #[doc = "Bits 4:7 - Single Mode Offset Calibration Value for Negative Single-ended Mode"]
76    #[inline(always)]
77    pub fn singleoffsetinv(&self) -> SINGLEOFFSETINV_R {
78        SINGLEOFFSETINV_R::new(((self.bits >> 4) & 0x0f) as u8)
79    }
80    #[doc = "Bits 8:14 - Single Mode Gain Calibration Value"]
81    #[inline(always)]
82    pub fn singlegain(&self) -> SINGLEGAIN_R {
83        SINGLEGAIN_R::new(((self.bits >> 8) & 0x7f) as u8)
84    }
85    #[doc = "Bit 15 - Negative Single-ended Offset Calibration is Enabled"]
86    #[inline(always)]
87    pub fn offsetinvmode(&self) -> OFFSETINVMODE_R {
88        OFFSETINVMODE_R::new(((self.bits >> 15) & 1) != 0)
89    }
90    #[doc = "Bits 16:19 - Scan Mode Offset Calibration Value for Differential or Positive Single-ended Mode"]
91    #[inline(always)]
92    pub fn scanoffset(&self) -> SCANOFFSET_R {
93        SCANOFFSET_R::new(((self.bits >> 16) & 0x0f) as u8)
94    }
95    #[doc = "Bits 20:23 - Scan Mode Offset Calibration Value for Negative Single-ended Mode"]
96    #[inline(always)]
97    pub fn scanoffsetinv(&self) -> SCANOFFSETINV_R {
98        SCANOFFSETINV_R::new(((self.bits >> 20) & 0x0f) as u8)
99    }
100    #[doc = "Bits 24:30 - Scan Mode Gain Calibration Value"]
101    #[inline(always)]
102    pub fn scangain(&self) -> SCANGAIN_R {
103        SCANGAIN_R::new(((self.bits >> 24) & 0x7f) as u8)
104    }
105    #[doc = "Bit 31 - Calibration Mode is Enabled"]
106    #[inline(always)]
107    pub fn calen(&self) -> CALEN_R {
108        CALEN_R::new(((self.bits >> 31) & 1) != 0)
109    }
110}
111impl W {
112    #[doc = "Bits 0:3 - Single Mode Offset Calibration Value for Differential or Positive Single-ended Mode"]
113    #[inline(always)]
114    pub fn singleoffset(&mut self) -> SINGLEOFFSET_W {
115        SINGLEOFFSET_W::new(self)
116    }
117    #[doc = "Bits 4:7 - Single Mode Offset Calibration Value for Negative Single-ended Mode"]
118    #[inline(always)]
119    pub fn singleoffsetinv(&mut self) -> SINGLEOFFSETINV_W {
120        SINGLEOFFSETINV_W::new(self)
121    }
122    #[doc = "Bits 8:14 - Single Mode Gain Calibration Value"]
123    #[inline(always)]
124    pub fn singlegain(&mut self) -> SINGLEGAIN_W {
125        SINGLEGAIN_W::new(self)
126    }
127    #[doc = "Bit 15 - Negative Single-ended Offset Calibration is Enabled"]
128    #[inline(always)]
129    pub fn offsetinvmode(&mut self) -> OFFSETINVMODE_W {
130        OFFSETINVMODE_W::new(self)
131    }
132    #[doc = "Bits 16:19 - Scan Mode Offset Calibration Value for Differential or Positive Single-ended Mode"]
133    #[inline(always)]
134    pub fn scanoffset(&mut self) -> SCANOFFSET_W {
135        SCANOFFSET_W::new(self)
136    }
137    #[doc = "Bits 20:23 - Scan Mode Offset Calibration Value for Negative Single-ended Mode"]
138    #[inline(always)]
139    pub fn scanoffsetinv(&mut self) -> SCANOFFSETINV_W {
140        SCANOFFSETINV_W::new(self)
141    }
142    #[doc = "Bits 24:30 - Scan Mode Gain Calibration Value"]
143    #[inline(always)]
144    pub fn scangain(&mut self) -> SCANGAIN_W {
145        SCANGAIN_W::new(self)
146    }
147    #[doc = "Bit 31 - Calibration Mode is Enabled"]
148    #[inline(always)]
149    pub fn calen(&mut self) -> CALEN_W {
150        CALEN_W::new(self)
151    }
152    #[doc = "Writes raw bits to the register."]
153    #[inline(always)]
154    pub unsafe fn bits(&mut self, bits: u32) -> &mut Self {
155        self.0.bits(bits);
156        self
157    }
158}
159#[doc = "Calibration Register\n\nThis register you can [`read`](crate::generic::Reg::read), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [cal](index.html) module"]
160pub struct CAL_SPEC;
161impl crate::RegisterSpec for CAL_SPEC {
162    type Ux = u32;
163}
164#[doc = "`read()` method returns [cal::R](R) reader structure"]
165impl crate::Readable for CAL_SPEC {
166    type Reader = R;
167}
168#[doc = "`write(|w| ..)` method takes [cal::W](W) writer structure"]
169impl crate::Writable for CAL_SPEC {
170    type Writer = W;
171}
172#[doc = "`reset()` method sets CAL to value 0x4078_4078"]
173impl crate::Resettable for CAL_SPEC {
174    #[inline(always)]
175    fn reset_value() -> Self::Ux {
176        0x4078_4078
177    }
178}
efm32pg1b200_pac/adc0/cal.rs

efm32pg1b200_pac/adc0/
cal.rs
