efm32gg_pac/efm32gg995/usb/
gusbcfg.rs

1#[doc = "Register `GUSBCFG` reader"]
2pub struct R(crate::R<GUSBCFG_SPEC>);
3impl core::ops::Deref for R {
4    type Target = crate::R<GUSBCFG_SPEC>;
5    #[inline(always)]
6    fn deref(&self) -> &Self::Target {
7        &self.0
8    }
9}
10impl From<crate::R<GUSBCFG_SPEC>> for R {
11    #[inline(always)]
12    fn from(reader: crate::R<GUSBCFG_SPEC>) -> Self {
13        R(reader)
14    }
15}
16#[doc = "Register `GUSBCFG` writer"]
17pub struct W(crate::W<GUSBCFG_SPEC>);
18impl core::ops::Deref for W {
19    type Target = crate::W<GUSBCFG_SPEC>;
20    #[inline(always)]
21    fn deref(&self) -> &Self::Target {
22        &self.0
23    }
24}
25impl core::ops::DerefMut for W {
26    #[inline(always)]
27    fn deref_mut(&mut self) -> &mut Self::Target {
28        &mut self.0
29    }
30}
31impl From<crate::W<GUSBCFG_SPEC>> for W {
32    #[inline(always)]
33    fn from(writer: crate::W<GUSBCFG_SPEC>) -> Self {
34        W(writer)
35    }
36}
37#[doc = "Field `TOUTCAL` reader - Timeout Calibration host and device"]
38pub type TOUTCAL_R = crate::FieldReader<u8, u8>;
39#[doc = "Field `TOUTCAL` writer - Timeout Calibration host and device"]
40pub type TOUTCAL_W<'a, const O: u8> = crate::FieldWriter<'a, u32, GUSBCFG_SPEC, u8, u8, 3, O>;
41#[doc = "Field `FSINTF` reader - Full-Speed Serial Interface Select host and device"]
42pub type FSINTF_R = crate::BitReader<bool>;
43#[doc = "Field `FSINTF` writer - Full-Speed Serial Interface Select host and device"]
44pub type FSINTF_W<'a, const O: u8> = crate::BitWriter<'a, u32, GUSBCFG_SPEC, bool, O>;
45#[doc = "Field `SRPCAP` reader - SRP-Capable host and device"]
46pub type SRPCAP_R = crate::BitReader<bool>;
47#[doc = "Field `SRPCAP` writer - SRP-Capable host and device"]
48pub type SRPCAP_W<'a, const O: u8> = crate::BitWriter<'a, u32, GUSBCFG_SPEC, bool, O>;
49#[doc = "Field `HNPCAP` reader - HNP-Capable host and device"]
50pub type HNPCAP_R = crate::BitReader<bool>;
51#[doc = "Field `HNPCAP` writer - HNP-Capable host and device"]
52pub type HNPCAP_W<'a, const O: u8> = crate::BitWriter<'a, u32, GUSBCFG_SPEC, bool, O>;
53#[doc = "Field `USBTRDTIM` reader - USB Turnaround Time device only"]
54pub type USBTRDTIM_R = crate::FieldReader<u8, u8>;
55#[doc = "Field `USBTRDTIM` writer - USB Turnaround Time device only"]
56pub type USBTRDTIM_W<'a, const O: u8> = crate::FieldWriter<'a, u32, GUSBCFG_SPEC, u8, u8, 4, O>;
57#[doc = "Field `TERMSELDLPULSE` reader - TermSel DLine Pulsing Selection device only"]
58pub type TERMSELDLPULSE_R = crate::BitReader<bool>;
59#[doc = "Field `TERMSELDLPULSE` writer - TermSel DLine Pulsing Selection device only"]
60pub type TERMSELDLPULSE_W<'a, const O: u8> = crate::BitWriter<'a, u32, GUSBCFG_SPEC, bool, O>;
61#[doc = "Field `TXENDDELAY` reader - Tx End Delay device only"]
62pub type TXENDDELAY_R = crate::BitReader<bool>;
63#[doc = "Field `TXENDDELAY` writer - Tx End Delay device only"]
64pub type TXENDDELAY_W<'a, const O: u8> = crate::BitWriter<'a, u32, GUSBCFG_SPEC, bool, O>;
65#[doc = "Field `FORCEHSTMODE` reader - Force Host Mode host and device"]
66pub type FORCEHSTMODE_R = crate::BitReader<bool>;
67#[doc = "Field `FORCEHSTMODE` writer - Force Host Mode host and device"]
68pub type FORCEHSTMODE_W<'a, const O: u8> = crate::BitWriter<'a, u32, GUSBCFG_SPEC, bool, O>;
69#[doc = "Field `FORCEDEVMODE` reader - Force Device Mode host and device"]
70pub type FORCEDEVMODE_R = crate::BitReader<bool>;
71#[doc = "Field `FORCEDEVMODE` writer - Force Device Mode host and device"]
72pub type FORCEDEVMODE_W<'a, const O: u8> = crate::BitWriter<'a, u32, GUSBCFG_SPEC, bool, O>;
73#[doc = "Field `CORRUPTTXPKT` writer - Corrupt Tx packet host and device"]
74pub type CORRUPTTXPKT_W<'a, const O: u8> = crate::BitWriter<'a, u32, GUSBCFG_SPEC, bool, O>;
75impl R {
76    #[doc = "Bits 0:2 - Timeout Calibration host and device"]
77    #[inline(always)]
78    pub fn toutcal(&self) -> TOUTCAL_R {
79        TOUTCAL_R::new((self.bits & 7) as u8)
80    }
81    #[doc = "Bit 5 - Full-Speed Serial Interface Select host and device"]
82    #[inline(always)]
83    pub fn fsintf(&self) -> FSINTF_R {
84        FSINTF_R::new(((self.bits >> 5) & 1) != 0)
85    }
86    #[doc = "Bit 8 - SRP-Capable host and device"]
87    #[inline(always)]
88    pub fn srpcap(&self) -> SRPCAP_R {
89        SRPCAP_R::new(((self.bits >> 8) & 1) != 0)
90    }
91    #[doc = "Bit 9 - HNP-Capable host and device"]
92    #[inline(always)]
93    pub fn hnpcap(&self) -> HNPCAP_R {
94        HNPCAP_R::new(((self.bits >> 9) & 1) != 0)
95    }
96    #[doc = "Bits 10:13 - USB Turnaround Time device only"]
97    #[inline(always)]
98    pub fn usbtrdtim(&self) -> USBTRDTIM_R {
99        USBTRDTIM_R::new(((self.bits >> 10) & 0x0f) as u8)
100    }
101    #[doc = "Bit 22 - TermSel DLine Pulsing Selection device only"]
102    #[inline(always)]
103    pub fn termseldlpulse(&self) -> TERMSELDLPULSE_R {
104        TERMSELDLPULSE_R::new(((self.bits >> 22) & 1) != 0)
105    }
106    #[doc = "Bit 28 - Tx End Delay device only"]
107    #[inline(always)]
108    pub fn txenddelay(&self) -> TXENDDELAY_R {
109        TXENDDELAY_R::new(((self.bits >> 28) & 1) != 0)
110    }
111    #[doc = "Bit 29 - Force Host Mode host and device"]
112    #[inline(always)]
113    pub fn forcehstmode(&self) -> FORCEHSTMODE_R {
114        FORCEHSTMODE_R::new(((self.bits >> 29) & 1) != 0)
115    }
116    #[doc = "Bit 30 - Force Device Mode host and device"]
117    #[inline(always)]
118    pub fn forcedevmode(&self) -> FORCEDEVMODE_R {
119        FORCEDEVMODE_R::new(((self.bits >> 30) & 1) != 0)
120    }
121}
122impl W {
123    #[doc = "Bits 0:2 - Timeout Calibration host and device"]
124    #[inline(always)]
125    #[must_use]
126    pub fn toutcal(&mut self) -> TOUTCAL_W<0> {
127        TOUTCAL_W::new(self)
128    }
129    #[doc = "Bit 5 - Full-Speed Serial Interface Select host and device"]
130    #[inline(always)]
131    #[must_use]
132    pub fn fsintf(&mut self) -> FSINTF_W<5> {
133        FSINTF_W::new(self)
134    }
135    #[doc = "Bit 8 - SRP-Capable host and device"]
136    #[inline(always)]
137    #[must_use]
138    pub fn srpcap(&mut self) -> SRPCAP_W<8> {
139        SRPCAP_W::new(self)
140    }
141    #[doc = "Bit 9 - HNP-Capable host and device"]
142    #[inline(always)]
143    #[must_use]
144    pub fn hnpcap(&mut self) -> HNPCAP_W<9> {
145        HNPCAP_W::new(self)
146    }
147    #[doc = "Bits 10:13 - USB Turnaround Time device only"]
148    #[inline(always)]
149    #[must_use]
150    pub fn usbtrdtim(&mut self) -> USBTRDTIM_W<10> {
151        USBTRDTIM_W::new(self)
152    }
153    #[doc = "Bit 22 - TermSel DLine Pulsing Selection device only"]
154    #[inline(always)]
155    #[must_use]
156    pub fn termseldlpulse(&mut self) -> TERMSELDLPULSE_W<22> {
157        TERMSELDLPULSE_W::new(self)
158    }
159    #[doc = "Bit 28 - Tx End Delay device only"]
160    #[inline(always)]
161    #[must_use]
162    pub fn txenddelay(&mut self) -> TXENDDELAY_W<28> {
163        TXENDDELAY_W::new(self)
164    }
165    #[doc = "Bit 29 - Force Host Mode host and device"]
166    #[inline(always)]
167    #[must_use]
168    pub fn forcehstmode(&mut self) -> FORCEHSTMODE_W<29> {
169        FORCEHSTMODE_W::new(self)
170    }
171    #[doc = "Bit 30 - Force Device Mode host and device"]
172    #[inline(always)]
173    #[must_use]
174    pub fn forcedevmode(&mut self) -> FORCEDEVMODE_W<30> {
175        FORCEDEVMODE_W::new(self)
176    }
177    #[doc = "Bit 31 - Corrupt Tx packet host and device"]
178    #[inline(always)]
179    #[must_use]
180    pub fn corrupttxpkt(&mut self) -> CORRUPTTXPKT_W<31> {
181        CORRUPTTXPKT_W::new(self)
182    }
183    #[doc = "Writes raw bits to the register."]
184    #[inline(always)]
185    pub unsafe fn bits(&mut self, bits: u32) -> &mut Self {
186        self.0.bits(bits);
187        self
188    }
189}
190#[doc = "USB Configuration Register\n\nThis register you can [`read`](crate::generic::Reg::read), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [gusbcfg](index.html) module"]
191pub struct GUSBCFG_SPEC;
192impl crate::RegisterSpec for GUSBCFG_SPEC {
193    type Ux = u32;
194}
195#[doc = "`read()` method returns [gusbcfg::R](R) reader structure"]
196impl crate::Readable for GUSBCFG_SPEC {
197    type Reader = R;
198}
199#[doc = "`write(|w| ..)` method takes [gusbcfg::W](W) writer structure"]
200impl crate::Writable for GUSBCFG_SPEC {
201    type Writer = W;
202    const ZERO_TO_MODIFY_FIELDS_BITMAP: Self::Ux = 0;
203    const ONE_TO_MODIFY_FIELDS_BITMAP: Self::Ux = 0;
204}
205#[doc = "`reset()` method sets GUSBCFG to value 0x1440"]
206impl crate::Resettable for GUSBCFG_SPEC {
207    const RESET_VALUE: Self::Ux = 0x1440;
208}
efm32gg_pac/efm32gg995/usb/gusbcfg.rs

efm32gg_pac/efm32gg995/usb/
gusbcfg.rs
