efm32gg_pac/efm32gg995/lesense/
ctrl.rs

1#[doc = "Register `CTRL` reader"]
2pub struct R(crate::R<CTRL_SPEC>);
3impl core::ops::Deref for R {
4    type Target = crate::R<CTRL_SPEC>;
5    #[inline(always)]
6    fn deref(&self) -> &Self::Target {
7        &self.0
8    }
9}
10impl From<crate::R<CTRL_SPEC>> for R {
11    #[inline(always)]
12    fn from(reader: crate::R<CTRL_SPEC>) -> Self {
13        R(reader)
14    }
15}
16#[doc = "Register `CTRL` writer"]
17pub struct W(crate::W<CTRL_SPEC>);
18impl core::ops::Deref for W {
19    type Target = crate::W<CTRL_SPEC>;
20    #[inline(always)]
21    fn deref(&self) -> &Self::Target {
22        &self.0
23    }
24}
25impl core::ops::DerefMut for W {
26    #[inline(always)]
27    fn deref_mut(&mut self) -> &mut Self::Target {
28        &mut self.0
29    }
30}
31impl From<crate::W<CTRL_SPEC>> for W {
32    #[inline(always)]
33    fn from(writer: crate::W<CTRL_SPEC>) -> Self {
34        W(writer)
35    }
36}
37#[doc = "Field `SCANMODE` reader - Configure scan mode"]
38pub type SCANMODE_R = crate::FieldReader<u8, SCANMODE_A>;
39#[doc = "Configure scan mode\n\nValue on reset: 0"]
40#[derive(Clone, Copy, Debug, PartialEq, Eq)]
41#[repr(u8)]
42pub enum SCANMODE_A {
43    #[doc = "0: A new scan is started each time the period counter overflows"]
44    PERIODIC = 0,
45    #[doc = "1: A single scan is performed when START in CMD is set"]
46    ONESHOT = 1,
47    #[doc = "2: Pulse on PRS channel"]
48    PRS = 2,
49}
50impl From<SCANMODE_A> for u8 {
51    #[inline(always)]
52    fn from(variant: SCANMODE_A) -> Self {
53        variant as _
54    }
55}
56impl SCANMODE_R {
57    #[doc = "Get enumerated values variant"]
58    #[inline(always)]
59    pub fn variant(&self) -> Option<SCANMODE_A> {
60        match self.bits {
61            0 => Some(SCANMODE_A::PERIODIC),
62            1 => Some(SCANMODE_A::ONESHOT),
63            2 => Some(SCANMODE_A::PRS),
64            _ => None,
65        }
66    }
67    #[doc = "Checks if the value of the field is `PERIODIC`"]
68    #[inline(always)]
69    pub fn is_periodic(&self) -> bool {
70        *self == SCANMODE_A::PERIODIC
71    }
72    #[doc = "Checks if the value of the field is `ONESHOT`"]
73    #[inline(always)]
74    pub fn is_oneshot(&self) -> bool {
75        *self == SCANMODE_A::ONESHOT
76    }
77    #[doc = "Checks if the value of the field is `PRS`"]
78    #[inline(always)]
79    pub fn is_prs(&self) -> bool {
80        *self == SCANMODE_A::PRS
81    }
82}
83#[doc = "Field `SCANMODE` writer - Configure scan mode"]
84pub type SCANMODE_W<'a, const O: u8> = crate::FieldWriter<'a, u32, CTRL_SPEC, u8, SCANMODE_A, 2, O>;
85impl<'a, const O: u8> SCANMODE_W<'a, O> {
86    #[doc = "A new scan is started each time the period counter overflows"]
87    #[inline(always)]
88    pub fn periodic(self) -> &'a mut W {
89        self.variant(SCANMODE_A::PERIODIC)
90    }
91    #[doc = "A single scan is performed when START in CMD is set"]
92    #[inline(always)]
93    pub fn oneshot(self) -> &'a mut W {
94        self.variant(SCANMODE_A::ONESHOT)
95    }
96    #[doc = "Pulse on PRS channel"]
97    #[inline(always)]
98    pub fn prs(self) -> &'a mut W {
99        self.variant(SCANMODE_A::PRS)
100    }
101}
102#[doc = "Field `PRSSEL` reader - Scan start PRS select"]
103pub type PRSSEL_R = crate::FieldReader<u8, PRSSEL_A>;
104#[doc = "Scan start PRS select\n\nValue on reset: 0"]
105#[derive(Clone, Copy, Debug, PartialEq, Eq)]
106#[repr(u8)]
107pub enum PRSSEL_A {
108    #[doc = "0: PRS Channel 0 selected as input"]
109    PRSCH0 = 0,
110    #[doc = "1: PRS Channel 1 selected as input"]
111    PRSCH1 = 1,
112    #[doc = "2: PRS Channel 2 selected as input"]
113    PRSCH2 = 2,
114    #[doc = "3: PRS Channel 3 selected as input"]
115    PRSCH3 = 3,
116    #[doc = "4: PRS Channel 4 selected as input"]
117    PRSCH4 = 4,
118    #[doc = "5: PRS Channel 5 selected as input"]
119    PRSCH5 = 5,
120    #[doc = "6: PRS Channel 6 selected as input"]
121    PRSCH6 = 6,
122    #[doc = "7: PRS Channel 7 selected as input"]
123    PRSCH7 = 7,
124    #[doc = "8: PRS Channel 8 selected as input"]
125    PRSCH8 = 8,
126    #[doc = "9: PRS Channel 9 selected as input"]
127    PRSCH9 = 9,
128    #[doc = "10: PRS Channel 10 selected as input"]
129    PRSCH10 = 10,
130    #[doc = "11: PRS Channel 11 selected as input"]
131    PRSCH11 = 11,
132}
133impl From<PRSSEL_A> for u8 {
134    #[inline(always)]
135    fn from(variant: PRSSEL_A) -> Self {
136        variant as _
137    }
138}
139impl PRSSEL_R {
140    #[doc = "Get enumerated values variant"]
141    #[inline(always)]
142    pub fn variant(&self) -> Option<PRSSEL_A> {
143        match self.bits {
144            0 => Some(PRSSEL_A::PRSCH0),
145            1 => Some(PRSSEL_A::PRSCH1),
146            2 => Some(PRSSEL_A::PRSCH2),
147            3 => Some(PRSSEL_A::PRSCH3),
148            4 => Some(PRSSEL_A::PRSCH4),
149            5 => Some(PRSSEL_A::PRSCH5),
150            6 => Some(PRSSEL_A::PRSCH6),
151            7 => Some(PRSSEL_A::PRSCH7),
152            8 => Some(PRSSEL_A::PRSCH8),
153            9 => Some(PRSSEL_A::PRSCH9),
154            10 => Some(PRSSEL_A::PRSCH10),
155            11 => Some(PRSSEL_A::PRSCH11),
156            _ => None,
157        }
158    }
159    #[doc = "Checks if the value of the field is `PRSCH0`"]
160    #[inline(always)]
161    pub fn is_prsch0(&self) -> bool {
162        *self == PRSSEL_A::PRSCH0
163    }
164    #[doc = "Checks if the value of the field is `PRSCH1`"]
165    #[inline(always)]
166    pub fn is_prsch1(&self) -> bool {
167        *self == PRSSEL_A::PRSCH1
168    }
169    #[doc = "Checks if the value of the field is `PRSCH2`"]
170    #[inline(always)]
171    pub fn is_prsch2(&self) -> bool {
172        *self == PRSSEL_A::PRSCH2
173    }
174    #[doc = "Checks if the value of the field is `PRSCH3`"]
175    #[inline(always)]
176    pub fn is_prsch3(&self) -> bool {
177        *self == PRSSEL_A::PRSCH3
178    }
179    #[doc = "Checks if the value of the field is `PRSCH4`"]
180    #[inline(always)]
181    pub fn is_prsch4(&self) -> bool {
182        *self == PRSSEL_A::PRSCH4
183    }
184    #[doc = "Checks if the value of the field is `PRSCH5`"]
185    #[inline(always)]
186    pub fn is_prsch5(&self) -> bool {
187        *self == PRSSEL_A::PRSCH5
188    }
189    #[doc = "Checks if the value of the field is `PRSCH6`"]
190    #[inline(always)]
191    pub fn is_prsch6(&self) -> bool {
192        *self == PRSSEL_A::PRSCH6
193    }
194    #[doc = "Checks if the value of the field is `PRSCH7`"]
195    #[inline(always)]
196    pub fn is_prsch7(&self) -> bool {
197        *self == PRSSEL_A::PRSCH7
198    }
199    #[doc = "Checks if the value of the field is `PRSCH8`"]
200    #[inline(always)]
201    pub fn is_prsch8(&self) -> bool {
202        *self == PRSSEL_A::PRSCH8
203    }
204    #[doc = "Checks if the value of the field is `PRSCH9`"]
205    #[inline(always)]
206    pub fn is_prsch9(&self) -> bool {
207        *self == PRSSEL_A::PRSCH9
208    }
209    #[doc = "Checks if the value of the field is `PRSCH10`"]
210    #[inline(always)]
211    pub fn is_prsch10(&self) -> bool {
212        *self == PRSSEL_A::PRSCH10
213    }
214    #[doc = "Checks if the value of the field is `PRSCH11`"]
215    #[inline(always)]
216    pub fn is_prsch11(&self) -> bool {
217        *self == PRSSEL_A::PRSCH11
218    }
219}
220#[doc = "Field `PRSSEL` writer - Scan start PRS select"]
221pub type PRSSEL_W<'a, const O: u8> = crate::FieldWriter<'a, u32, CTRL_SPEC, u8, PRSSEL_A, 4, O>;
222impl<'a, const O: u8> PRSSEL_W<'a, O> {
223    #[doc = "PRS Channel 0 selected as input"]
224    #[inline(always)]
225    pub fn prsch0(self) -> &'a mut W {
226        self.variant(PRSSEL_A::PRSCH0)
227    }
228    #[doc = "PRS Channel 1 selected as input"]
229    #[inline(always)]
230    pub fn prsch1(self) -> &'a mut W {
231        self.variant(PRSSEL_A::PRSCH1)
232    }
233    #[doc = "PRS Channel 2 selected as input"]
234    #[inline(always)]
235    pub fn prsch2(self) -> &'a mut W {
236        self.variant(PRSSEL_A::PRSCH2)
237    }
238    #[doc = "PRS Channel 3 selected as input"]
239    #[inline(always)]
240    pub fn prsch3(self) -> &'a mut W {
241        self.variant(PRSSEL_A::PRSCH3)
242    }
243    #[doc = "PRS Channel 4 selected as input"]
244    #[inline(always)]
245    pub fn prsch4(self) -> &'a mut W {
246        self.variant(PRSSEL_A::PRSCH4)
247    }
248    #[doc = "PRS Channel 5 selected as input"]
249    #[inline(always)]
250    pub fn prsch5(self) -> &'a mut W {
251        self.variant(PRSSEL_A::PRSCH5)
252    }
253    #[doc = "PRS Channel 6 selected as input"]
254    #[inline(always)]
255    pub fn prsch6(self) -> &'a mut W {
256        self.variant(PRSSEL_A::PRSCH6)
257    }
258    #[doc = "PRS Channel 7 selected as input"]
259    #[inline(always)]
260    pub fn prsch7(self) -> &'a mut W {
261        self.variant(PRSSEL_A::PRSCH7)
262    }
263    #[doc = "PRS Channel 8 selected as input"]
264    #[inline(always)]
265    pub fn prsch8(self) -> &'a mut W {
266        self.variant(PRSSEL_A::PRSCH8)
267    }
268    #[doc = "PRS Channel 9 selected as input"]
269    #[inline(always)]
270    pub fn prsch9(self) -> &'a mut W {
271        self.variant(PRSSEL_A::PRSCH9)
272    }
273    #[doc = "PRS Channel 10 selected as input"]
274    #[inline(always)]
275    pub fn prsch10(self) -> &'a mut W {
276        self.variant(PRSSEL_A::PRSCH10)
277    }
278    #[doc = "PRS Channel 11 selected as input"]
279    #[inline(always)]
280    pub fn prsch11(self) -> &'a mut W {
281        self.variant(PRSSEL_A::PRSCH11)
282    }
283}
284#[doc = "Field `SCANCONF` reader - Select scan configuration"]
285pub type SCANCONF_R = crate::FieldReader<u8, SCANCONF_A>;
286#[doc = "Select scan configuration\n\nValue on reset: 0"]
287#[derive(Clone, Copy, Debug, PartialEq, Eq)]
288#[repr(u8)]
289pub enum SCANCONF_A {
290    #[doc = "0: The channel configuration register registers used are directly mapped to the channel number."]
291    DIRMAP = 0,
292    #[doc = "1: The channel configuration register registers used are CHX+8_CONF for channels 0-7 and CHX-8_CONF for channels 8-15."]
293    INVMAP = 1,
294    #[doc = "2: The channel configuration register registers used toggles between CHX_CONF and CHX+8_CONF when channel x triggers"]
295    TOGGLE = 2,
296    #[doc = "3: The decoder state defines the CONF registers to be used."]
297    DECDEF = 3,
298}
299impl From<SCANCONF_A> for u8 {
300    #[inline(always)]
301    fn from(variant: SCANCONF_A) -> Self {
302        variant as _
303    }
304}
305impl SCANCONF_R {
306    #[doc = "Get enumerated values variant"]
307    #[inline(always)]
308    pub fn variant(&self) -> SCANCONF_A {
309        match self.bits {
310            0 => SCANCONF_A::DIRMAP,
311            1 => SCANCONF_A::INVMAP,
312            2 => SCANCONF_A::TOGGLE,
313            3 => SCANCONF_A::DECDEF,
314            _ => unreachable!(),
315        }
316    }
317    #[doc = "Checks if the value of the field is `DIRMAP`"]
318    #[inline(always)]
319    pub fn is_dirmap(&self) -> bool {
320        *self == SCANCONF_A::DIRMAP
321    }
322    #[doc = "Checks if the value of the field is `INVMAP`"]
323    #[inline(always)]
324    pub fn is_invmap(&self) -> bool {
325        *self == SCANCONF_A::INVMAP
326    }
327    #[doc = "Checks if the value of the field is `TOGGLE`"]
328    #[inline(always)]
329    pub fn is_toggle(&self) -> bool {
330        *self == SCANCONF_A::TOGGLE
331    }
332    #[doc = "Checks if the value of the field is `DECDEF`"]
333    #[inline(always)]
334    pub fn is_decdef(&self) -> bool {
335        *self == SCANCONF_A::DECDEF
336    }
337}
338#[doc = "Field `SCANCONF` writer - Select scan configuration"]
339pub type SCANCONF_W<'a, const O: u8> =
340    crate::FieldWriterSafe<'a, u32, CTRL_SPEC, u8, SCANCONF_A, 2, O>;
341impl<'a, const O: u8> SCANCONF_W<'a, O> {
342    #[doc = "The channel configuration register registers used are directly mapped to the channel number."]
343    #[inline(always)]
344    pub fn dirmap(self) -> &'a mut W {
345        self.variant(SCANCONF_A::DIRMAP)
346    }
347    #[doc = "The channel configuration register registers used are CHX+8_CONF for channels 0-7 and CHX-8_CONF for channels 8-15."]
348    #[inline(always)]
349    pub fn invmap(self) -> &'a mut W {
350        self.variant(SCANCONF_A::INVMAP)
351    }
352    #[doc = "The channel configuration register registers used toggles between CHX_CONF and CHX+8_CONF when channel x triggers"]
353    #[inline(always)]
354    pub fn toggle(self) -> &'a mut W {
355        self.variant(SCANCONF_A::TOGGLE)
356    }
357    #[doc = "The decoder state defines the CONF registers to be used."]
358    #[inline(always)]
359    pub fn decdef(self) -> &'a mut W {
360        self.variant(SCANCONF_A::DECDEF)
361    }
362}
363#[doc = "Field `ACMP0INV` reader - Invert analog comparator 0 output"]
364pub type ACMP0INV_R = crate::BitReader<bool>;
365#[doc = "Field `ACMP0INV` writer - Invert analog comparator 0 output"]
366pub type ACMP0INV_W<'a, const O: u8> = crate::BitWriter<'a, u32, CTRL_SPEC, bool, O>;
367#[doc = "Field `ACMP1INV` reader - Invert analog comparator 1 output"]
368pub type ACMP1INV_R = crate::BitReader<bool>;
369#[doc = "Field `ACMP1INV` writer - Invert analog comparator 1 output"]
370pub type ACMP1INV_W<'a, const O: u8> = crate::BitWriter<'a, u32, CTRL_SPEC, bool, O>;
371#[doc = "Field `ALTEXMAP` reader - Alternative excitation map"]
372pub type ALTEXMAP_R = crate::BitReader<bool>;
373#[doc = "Field `ALTEXMAP` writer - Alternative excitation map"]
374pub type ALTEXMAP_W<'a, const O: u8> = crate::BitWriter<'a, u32, CTRL_SPEC, bool, O>;
375#[doc = "Field `DUALSAMPLE` reader - Enable dual sample mode"]
376pub type DUALSAMPLE_R = crate::BitReader<bool>;
377#[doc = "Field `DUALSAMPLE` writer - Enable dual sample mode"]
378pub type DUALSAMPLE_W<'a, const O: u8> = crate::BitWriter<'a, u32, CTRL_SPEC, bool, O>;
379#[doc = "Field `BUFOW` reader - Result buffer overwrite"]
380pub type BUFOW_R = crate::BitReader<bool>;
381#[doc = "Field `BUFOW` writer - Result buffer overwrite"]
382pub type BUFOW_W<'a, const O: u8> = crate::BitWriter<'a, u32, CTRL_SPEC, bool, O>;
383#[doc = "Field `STRSCANRES` reader - Enable storing of SCANRES"]
384pub type STRSCANRES_R = crate::BitReader<bool>;
385#[doc = "Field `STRSCANRES` writer - Enable storing of SCANRES"]
386pub type STRSCANRES_W<'a, const O: u8> = crate::BitWriter<'a, u32, CTRL_SPEC, bool, O>;
387#[doc = "Field `BUFIDL` reader - Result buffer interrupt and DMA trigger level"]
388pub type BUFIDL_R = crate::BitReader<bool>;
389#[doc = "Field `BUFIDL` writer - Result buffer interrupt and DMA trigger level"]
390pub type BUFIDL_W<'a, const O: u8> = crate::BitWriter<'a, u32, CTRL_SPEC, bool, O>;
391#[doc = "Field `DMAWU` reader - DMA wake-up from EM2"]
392pub type DMAWU_R = crate::FieldReader<u8, DMAWU_A>;
393#[doc = "DMA wake-up from EM2\n\nValue on reset: 0"]
394#[derive(Clone, Copy, Debug, PartialEq, Eq)]
395#[repr(u8)]
396pub enum DMAWU_A {
397    #[doc = "0: No DMA wake-up from EM2"]
398    DISABLE = 0,
399    #[doc = "1: DMA wake-up from EM2 when data is valid in the result buffer"]
400    BUFDATAV = 1,
401    #[doc = "2: DMA wake-up from EM2 when the result buffer is full/half-full depending on BUFIDL configuration"]
402    BUFLEVEL = 2,
403}
404impl From<DMAWU_A> for u8 {
405    #[inline(always)]
406    fn from(variant: DMAWU_A) -> Self {
407        variant as _
408    }
409}
410impl DMAWU_R {
411    #[doc = "Get enumerated values variant"]
412    #[inline(always)]
413    pub fn variant(&self) -> Option<DMAWU_A> {
414        match self.bits {
415            0 => Some(DMAWU_A::DISABLE),
416            1 => Some(DMAWU_A::BUFDATAV),
417            2 => Some(DMAWU_A::BUFLEVEL),
418            _ => None,
419        }
420    }
421    #[doc = "Checks if the value of the field is `DISABLE`"]
422    #[inline(always)]
423    pub fn is_disable(&self) -> bool {
424        *self == DMAWU_A::DISABLE
425    }
426    #[doc = "Checks if the value of the field is `BUFDATAV`"]
427    #[inline(always)]
428    pub fn is_bufdatav(&self) -> bool {
429        *self == DMAWU_A::BUFDATAV
430    }
431    #[doc = "Checks if the value of the field is `BUFLEVEL`"]
432    #[inline(always)]
433    pub fn is_buflevel(&self) -> bool {
434        *self == DMAWU_A::BUFLEVEL
435    }
436}
437#[doc = "Field `DMAWU` writer - DMA wake-up from EM2"]
438pub type DMAWU_W<'a, const O: u8> = crate::FieldWriter<'a, u32, CTRL_SPEC, u8, DMAWU_A, 2, O>;
439impl<'a, const O: u8> DMAWU_W<'a, O> {
440    #[doc = "No DMA wake-up from EM2"]
441    #[inline(always)]
442    pub fn disable(self) -> &'a mut W {
443        self.variant(DMAWU_A::DISABLE)
444    }
445    #[doc = "DMA wake-up from EM2 when data is valid in the result buffer"]
446    #[inline(always)]
447    pub fn bufdatav(self) -> &'a mut W {
448        self.variant(DMAWU_A::BUFDATAV)
449    }
450    #[doc = "DMA wake-up from EM2 when the result buffer is full/half-full depending on BUFIDL configuration"]
451    #[inline(always)]
452    pub fn buflevel(self) -> &'a mut W {
453        self.variant(DMAWU_A::BUFLEVEL)
454    }
455}
456#[doc = "Field `DEBUGRUN` reader - Debug Mode Run Enable"]
457pub type DEBUGRUN_R = crate::BitReader<bool>;
458#[doc = "Field `DEBUGRUN` writer - Debug Mode Run Enable"]
459pub type DEBUGRUN_W<'a, const O: u8> = crate::BitWriter<'a, u32, CTRL_SPEC, bool, O>;
460impl R {
461    #[doc = "Bits 0:1 - Configure scan mode"]
462    #[inline(always)]
463    pub fn scanmode(&self) -> SCANMODE_R {
464        SCANMODE_R::new((self.bits & 3) as u8)
465    }
466    #[doc = "Bits 2:5 - Scan start PRS select"]
467    #[inline(always)]
468    pub fn prssel(&self) -> PRSSEL_R {
469        PRSSEL_R::new(((self.bits >> 2) & 0x0f) as u8)
470    }
471    #[doc = "Bits 6:7 - Select scan configuration"]
472    #[inline(always)]
473    pub fn scanconf(&self) -> SCANCONF_R {
474        SCANCONF_R::new(((self.bits >> 6) & 3) as u8)
475    }
476    #[doc = "Bit 9 - Invert analog comparator 0 output"]
477    #[inline(always)]
478    pub fn acmp0inv(&self) -> ACMP0INV_R {
479        ACMP0INV_R::new(((self.bits >> 9) & 1) != 0)
480    }
481    #[doc = "Bit 10 - Invert analog comparator 1 output"]
482    #[inline(always)]
483    pub fn acmp1inv(&self) -> ACMP1INV_R {
484        ACMP1INV_R::new(((self.bits >> 10) & 1) != 0)
485    }
486    #[doc = "Bit 11 - Alternative excitation map"]
487    #[inline(always)]
488    pub fn altexmap(&self) -> ALTEXMAP_R {
489        ALTEXMAP_R::new(((self.bits >> 11) & 1) != 0)
490    }
491    #[doc = "Bit 13 - Enable dual sample mode"]
492    #[inline(always)]
493    pub fn dualsample(&self) -> DUALSAMPLE_R {
494        DUALSAMPLE_R::new(((self.bits >> 13) & 1) != 0)
495    }
496    #[doc = "Bit 16 - Result buffer overwrite"]
497    #[inline(always)]
498    pub fn bufow(&self) -> BUFOW_R {
499        BUFOW_R::new(((self.bits >> 16) & 1) != 0)
500    }
501    #[doc = "Bit 17 - Enable storing of SCANRES"]
502    #[inline(always)]
503    pub fn strscanres(&self) -> STRSCANRES_R {
504        STRSCANRES_R::new(((self.bits >> 17) & 1) != 0)
505    }
506    #[doc = "Bit 18 - Result buffer interrupt and DMA trigger level"]
507    #[inline(always)]
508    pub fn bufidl(&self) -> BUFIDL_R {
509        BUFIDL_R::new(((self.bits >> 18) & 1) != 0)
510    }
511    #[doc = "Bits 20:21 - DMA wake-up from EM2"]
512    #[inline(always)]
513    pub fn dmawu(&self) -> DMAWU_R {
514        DMAWU_R::new(((self.bits >> 20) & 3) as u8)
515    }
516    #[doc = "Bit 22 - Debug Mode Run Enable"]
517    #[inline(always)]
518    pub fn debugrun(&self) -> DEBUGRUN_R {
519        DEBUGRUN_R::new(((self.bits >> 22) & 1) != 0)
520    }
521}
522impl W {
523    #[doc = "Bits 0:1 - Configure scan mode"]
524    #[inline(always)]
525    #[must_use]
526    pub fn scanmode(&mut self) -> SCANMODE_W<0> {
527        SCANMODE_W::new(self)
528    }
529    #[doc = "Bits 2:5 - Scan start PRS select"]
530    #[inline(always)]
531    #[must_use]
532    pub fn prssel(&mut self) -> PRSSEL_W<2> {
533        PRSSEL_W::new(self)
534    }
535    #[doc = "Bits 6:7 - Select scan configuration"]
536    #[inline(always)]
537    #[must_use]
538    pub fn scanconf(&mut self) -> SCANCONF_W<6> {
539        SCANCONF_W::new(self)
540    }
541    #[doc = "Bit 9 - Invert analog comparator 0 output"]
542    #[inline(always)]
543    #[must_use]
544    pub fn acmp0inv(&mut self) -> ACMP0INV_W<9> {
545        ACMP0INV_W::new(self)
546    }
547    #[doc = "Bit 10 - Invert analog comparator 1 output"]
548    #[inline(always)]
549    #[must_use]
550    pub fn acmp1inv(&mut self) -> ACMP1INV_W<10> {
551        ACMP1INV_W::new(self)
552    }
553    #[doc = "Bit 11 - Alternative excitation map"]
554    #[inline(always)]
555    #[must_use]
556    pub fn altexmap(&mut self) -> ALTEXMAP_W<11> {
557        ALTEXMAP_W::new(self)
558    }
559    #[doc = "Bit 13 - Enable dual sample mode"]
560    #[inline(always)]
561    #[must_use]
562    pub fn dualsample(&mut self) -> DUALSAMPLE_W<13> {
563        DUALSAMPLE_W::new(self)
564    }
565    #[doc = "Bit 16 - Result buffer overwrite"]
566    #[inline(always)]
567    #[must_use]
568    pub fn bufow(&mut self) -> BUFOW_W<16> {
569        BUFOW_W::new(self)
570    }
571    #[doc = "Bit 17 - Enable storing of SCANRES"]
572    #[inline(always)]
573    #[must_use]
574    pub fn strscanres(&mut self) -> STRSCANRES_W<17> {
575        STRSCANRES_W::new(self)
576    }
577    #[doc = "Bit 18 - Result buffer interrupt and DMA trigger level"]
578    #[inline(always)]
579    #[must_use]
580    pub fn bufidl(&mut self) -> BUFIDL_W<18> {
581        BUFIDL_W::new(self)
582    }
583    #[doc = "Bits 20:21 - DMA wake-up from EM2"]
584    #[inline(always)]
585    #[must_use]
586    pub fn dmawu(&mut self) -> DMAWU_W<20> {
587        DMAWU_W::new(self)
588    }
589    #[doc = "Bit 22 - Debug Mode Run Enable"]
590    #[inline(always)]
591    #[must_use]
592    pub fn debugrun(&mut self) -> DEBUGRUN_W<22> {
593        DEBUGRUN_W::new(self)
594    }
595    #[doc = "Writes raw bits to the register."]
596    #[inline(always)]
597    pub unsafe fn bits(&mut self, bits: u32) -> &mut Self {
598        self.0.bits(bits);
599        self
600    }
601}
602#[doc = "Control Register\n\nThis register you can [`read`](crate::generic::Reg::read), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [ctrl](index.html) module"]
603pub struct CTRL_SPEC;
604impl crate::RegisterSpec for CTRL_SPEC {
605    type Ux = u32;
606}
607#[doc = "`read()` method returns [ctrl::R](R) reader structure"]
608impl crate::Readable for CTRL_SPEC {
609    type Reader = R;
610}
611#[doc = "`write(|w| ..)` method takes [ctrl::W](W) writer structure"]
612impl crate::Writable for CTRL_SPEC {
613    type Writer = W;
614    const ZERO_TO_MODIFY_FIELDS_BITMAP: Self::Ux = 0;
615    const ONE_TO_MODIFY_FIELDS_BITMAP: Self::Ux = 0;
616}
617#[doc = "`reset()` method sets CTRL to value 0"]
618impl crate::Resettable for CTRL_SPEC {
619    const RESET_VALUE: Self::Ux = 0;
620}
efm32gg_pac/efm32gg995/lesense/ctrl.rs

efm32gg_pac/efm32gg995/lesense/
ctrl.rs
