efm32gg_pac/efm32gg230/lesense/
ch0_interact.rs

1#[doc = "Register `CH0_INTERACT` reader"]
2pub struct R(crate::R<CH0_INTERACT_SPEC>);
3impl core::ops::Deref for R {
4    type Target = crate::R<CH0_INTERACT_SPEC>;
5    #[inline(always)]
6    fn deref(&self) -> &Self::Target {
7        &self.0
8    }
9}
10impl From<crate::R<CH0_INTERACT_SPEC>> for R {
11    #[inline(always)]
12    fn from(reader: crate::R<CH0_INTERACT_SPEC>) -> Self {
13        R(reader)
14    }
15}
16#[doc = "Register `CH0_INTERACT` writer"]
17pub struct W(crate::W<CH0_INTERACT_SPEC>);
18impl core::ops::Deref for W {
19    type Target = crate::W<CH0_INTERACT_SPEC>;
20    #[inline(always)]
21    fn deref(&self) -> &Self::Target {
22        &self.0
23    }
24}
25impl core::ops::DerefMut for W {
26    #[inline(always)]
27    fn deref_mut(&mut self) -> &mut Self::Target {
28        &mut self.0
29    }
30}
31impl From<crate::W<CH0_INTERACT_SPEC>> for W {
32    #[inline(always)]
33    fn from(writer: crate::W<CH0_INTERACT_SPEC>) -> Self {
34        W(writer)
35    }
36}
37#[doc = "Field `ACMPTHRES` reader - Set ACMP threshold"]
38pub type ACMPTHRES_R = crate::FieldReader<u16, u16>;
39#[doc = "Field `ACMPTHRES` writer - Set ACMP threshold"]
40pub type ACMPTHRES_W<'a, const O: u8> =
41    crate::FieldWriter<'a, u32, CH0_INTERACT_SPEC, u16, u16, 12, O>;
42#[doc = "Field `SAMPLE` reader - Select sample mode"]
43pub type SAMPLE_R = crate::BitReader<bool>;
44#[doc = "Field `SAMPLE` writer - Select sample mode"]
45pub type SAMPLE_W<'a, const O: u8> = crate::BitWriter<'a, u32, CH0_INTERACT_SPEC, bool, O>;
46#[doc = "Field `SETIF` reader - Enable interrupt generation"]
47pub type SETIF_R = crate::FieldReader<u8, SETIF_A>;
48#[doc = "Enable interrupt generation\n\nValue on reset: 0"]
49#[derive(Clone, Copy, Debug, PartialEq, Eq)]
50#[repr(u8)]
51pub enum SETIF_A {
52    #[doc = "0: No interrupt is generated"]
53    NONE = 0,
54    #[doc = "1: Set interrupt flag if the sensor triggers."]
55    LEVEL = 1,
56    #[doc = "2: Set interrupt flag on positive edge on the sensor state"]
57    POSEDGE = 2,
58    #[doc = "3: Set interrupt flag on negative edge on the sensor state"]
59    NEGEDGE = 3,
60}
61impl From<SETIF_A> for u8 {
62    #[inline(always)]
63    fn from(variant: SETIF_A) -> Self {
64        variant as _
65    }
66}
67impl SETIF_R {
68    #[doc = "Get enumerated values variant"]
69    #[inline(always)]
70    pub fn variant(&self) -> SETIF_A {
71        match self.bits {
72            0 => SETIF_A::NONE,
73            1 => SETIF_A::LEVEL,
74            2 => SETIF_A::POSEDGE,
75            3 => SETIF_A::NEGEDGE,
76            _ => unreachable!(),
77        }
78    }
79    #[doc = "Checks if the value of the field is `NONE`"]
80    #[inline(always)]
81    pub fn is_none(&self) -> bool {
82        *self == SETIF_A::NONE
83    }
84    #[doc = "Checks if the value of the field is `LEVEL`"]
85    #[inline(always)]
86    pub fn is_level(&self) -> bool {
87        *self == SETIF_A::LEVEL
88    }
89    #[doc = "Checks if the value of the field is `POSEDGE`"]
90    #[inline(always)]
91    pub fn is_posedge(&self) -> bool {
92        *self == SETIF_A::POSEDGE
93    }
94    #[doc = "Checks if the value of the field is `NEGEDGE`"]
95    #[inline(always)]
96    pub fn is_negedge(&self) -> bool {
97        *self == SETIF_A::NEGEDGE
98    }
99}
100#[doc = "Field `SETIF` writer - Enable interrupt generation"]
101pub type SETIF_W<'a, const O: u8> =
102    crate::FieldWriterSafe<'a, u32, CH0_INTERACT_SPEC, u8, SETIF_A, 2, O>;
103impl<'a, const O: u8> SETIF_W<'a, O> {
104    #[doc = "No interrupt is generated"]
105    #[inline(always)]
106    pub fn none(self) -> &'a mut W {
107        self.variant(SETIF_A::NONE)
108    }
109    #[doc = "Set interrupt flag if the sensor triggers."]
110    #[inline(always)]
111    pub fn level(self) -> &'a mut W {
112        self.variant(SETIF_A::LEVEL)
113    }
114    #[doc = "Set interrupt flag on positive edge on the sensor state"]
115    #[inline(always)]
116    pub fn posedge(self) -> &'a mut W {
117        self.variant(SETIF_A::POSEDGE)
118    }
119    #[doc = "Set interrupt flag on negative edge on the sensor state"]
120    #[inline(always)]
121    pub fn negedge(self) -> &'a mut W {
122        self.variant(SETIF_A::NEGEDGE)
123    }
124}
125#[doc = "Field `EXMODE` reader - Set GPIO mode"]
126pub type EXMODE_R = crate::FieldReader<u8, EXMODE_A>;
127#[doc = "Set GPIO mode\n\nValue on reset: 0"]
128#[derive(Clone, Copy, Debug, PartialEq, Eq)]
129#[repr(u8)]
130pub enum EXMODE_A {
131    #[doc = "0: Disabled"]
132    DISABLE = 0,
133    #[doc = "1: Push Pull, GPIO is driven high"]
134    HIGH = 1,
135    #[doc = "2: Push Pull, GPIO is driven low"]
136    LOW = 2,
137    #[doc = "3: DAC output"]
138    DACOUT = 3,
139}
140impl From<EXMODE_A> for u8 {
141    #[inline(always)]
142    fn from(variant: EXMODE_A) -> Self {
143        variant as _
144    }
145}
146impl EXMODE_R {
147    #[doc = "Get enumerated values variant"]
148    #[inline(always)]
149    pub fn variant(&self) -> EXMODE_A {
150        match self.bits {
151            0 => EXMODE_A::DISABLE,
152            1 => EXMODE_A::HIGH,
153            2 => EXMODE_A::LOW,
154            3 => EXMODE_A::DACOUT,
155            _ => unreachable!(),
156        }
157    }
158    #[doc = "Checks if the value of the field is `DISABLE`"]
159    #[inline(always)]
160    pub fn is_disable(&self) -> bool {
161        *self == EXMODE_A::DISABLE
162    }
163    #[doc = "Checks if the value of the field is `HIGH`"]
164    #[inline(always)]
165    pub fn is_high(&self) -> bool {
166        *self == EXMODE_A::HIGH
167    }
168    #[doc = "Checks if the value of the field is `LOW`"]
169    #[inline(always)]
170    pub fn is_low(&self) -> bool {
171        *self == EXMODE_A::LOW
172    }
173    #[doc = "Checks if the value of the field is `DACOUT`"]
174    #[inline(always)]
175    pub fn is_dacout(&self) -> bool {
176        *self == EXMODE_A::DACOUT
177    }
178}
179#[doc = "Field `EXMODE` writer - Set GPIO mode"]
180pub type EXMODE_W<'a, const O: u8> =
181    crate::FieldWriterSafe<'a, u32, CH0_INTERACT_SPEC, u8, EXMODE_A, 2, O>;
182impl<'a, const O: u8> EXMODE_W<'a, O> {
183    #[doc = "Disabled"]
184    #[inline(always)]
185    pub fn disable(self) -> &'a mut W {
186        self.variant(EXMODE_A::DISABLE)
187    }
188    #[doc = "Push Pull, GPIO is driven high"]
189    #[inline(always)]
190    pub fn high(self) -> &'a mut W {
191        self.variant(EXMODE_A::HIGH)
192    }
193    #[doc = "Push Pull, GPIO is driven low"]
194    #[inline(always)]
195    pub fn low(self) -> &'a mut W {
196        self.variant(EXMODE_A::LOW)
197    }
198    #[doc = "DAC output"]
199    #[inline(always)]
200    pub fn dacout(self) -> &'a mut W {
201        self.variant(EXMODE_A::DACOUT)
202    }
203}
204#[doc = "Field `EXCLK` reader - Select clock used for excitation timing"]
205pub type EXCLK_R = crate::BitReader<bool>;
206#[doc = "Field `EXCLK` writer - Select clock used for excitation timing"]
207pub type EXCLK_W<'a, const O: u8> = crate::BitWriter<'a, u32, CH0_INTERACT_SPEC, bool, O>;
208#[doc = "Field `SAMPLECLK` reader - Select clock used for timing of sample delay"]
209pub type SAMPLECLK_R = crate::BitReader<bool>;
210#[doc = "Field `SAMPLECLK` writer - Select clock used for timing of sample delay"]
211pub type SAMPLECLK_W<'a, const O: u8> = crate::BitWriter<'a, u32, CH0_INTERACT_SPEC, bool, O>;
212#[doc = "Field `ALTEX` reader - Use alternative excite pin"]
213pub type ALTEX_R = crate::BitReader<bool>;
214#[doc = "Field `ALTEX` writer - Use alternative excite pin"]
215pub type ALTEX_W<'a, const O: u8> = crate::BitWriter<'a, u32, CH0_INTERACT_SPEC, bool, O>;
216impl R {
217    #[doc = "Bits 0:11 - Set ACMP threshold"]
218    #[inline(always)]
219    pub fn acmpthres(&self) -> ACMPTHRES_R {
220        ACMPTHRES_R::new((self.bits & 0x0fff) as u16)
221    }
222    #[doc = "Bit 12 - Select sample mode"]
223    #[inline(always)]
224    pub fn sample(&self) -> SAMPLE_R {
225        SAMPLE_R::new(((self.bits >> 12) & 1) != 0)
226    }
227    #[doc = "Bits 13:14 - Enable interrupt generation"]
228    #[inline(always)]
229    pub fn setif(&self) -> SETIF_R {
230        SETIF_R::new(((self.bits >> 13) & 3) as u8)
231    }
232    #[doc = "Bits 15:16 - Set GPIO mode"]
233    #[inline(always)]
234    pub fn exmode(&self) -> EXMODE_R {
235        EXMODE_R::new(((self.bits >> 15) & 3) as u8)
236    }
237    #[doc = "Bit 17 - Select clock used for excitation timing"]
238    #[inline(always)]
239    pub fn exclk(&self) -> EXCLK_R {
240        EXCLK_R::new(((self.bits >> 17) & 1) != 0)
241    }
242    #[doc = "Bit 18 - Select clock used for timing of sample delay"]
243    #[inline(always)]
244    pub fn sampleclk(&self) -> SAMPLECLK_R {
245        SAMPLECLK_R::new(((self.bits >> 18) & 1) != 0)
246    }
247    #[doc = "Bit 19 - Use alternative excite pin"]
248    #[inline(always)]
249    pub fn altex(&self) -> ALTEX_R {
250        ALTEX_R::new(((self.bits >> 19) & 1) != 0)
251    }
252}
253impl W {
254    #[doc = "Bits 0:11 - Set ACMP threshold"]
255    #[inline(always)]
256    #[must_use]
257    pub fn acmpthres(&mut self) -> ACMPTHRES_W<0> {
258        ACMPTHRES_W::new(self)
259    }
260    #[doc = "Bit 12 - Select sample mode"]
261    #[inline(always)]
262    #[must_use]
263    pub fn sample(&mut self) -> SAMPLE_W<12> {
264        SAMPLE_W::new(self)
265    }
266    #[doc = "Bits 13:14 - Enable interrupt generation"]
267    #[inline(always)]
268    #[must_use]
269    pub fn setif(&mut self) -> SETIF_W<13> {
270        SETIF_W::new(self)
271    }
272    #[doc = "Bits 15:16 - Set GPIO mode"]
273    #[inline(always)]
274    #[must_use]
275    pub fn exmode(&mut self) -> EXMODE_W<15> {
276        EXMODE_W::new(self)
277    }
278    #[doc = "Bit 17 - Select clock used for excitation timing"]
279    #[inline(always)]
280    #[must_use]
281    pub fn exclk(&mut self) -> EXCLK_W<17> {
282        EXCLK_W::new(self)
283    }
284    #[doc = "Bit 18 - Select clock used for timing of sample delay"]
285    #[inline(always)]
286    #[must_use]
287    pub fn sampleclk(&mut self) -> SAMPLECLK_W<18> {
288        SAMPLECLK_W::new(self)
289    }
290    #[doc = "Bit 19 - Use alternative excite pin"]
291    #[inline(always)]
292    #[must_use]
293    pub fn altex(&mut self) -> ALTEX_W<19> {
294        ALTEX_W::new(self)
295    }
296    #[doc = "Writes raw bits to the register."]
297    #[inline(always)]
298    pub unsafe fn bits(&mut self, bits: u32) -> &mut Self {
299        self.0.bits(bits);
300        self
301    }
302}
303#[doc = "Scan configuration\n\nThis register you can [`read`](crate::generic::Reg::read), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [ch0_interact](index.html) module"]
304pub struct CH0_INTERACT_SPEC;
305impl crate::RegisterSpec for CH0_INTERACT_SPEC {
306    type Ux = u32;
307}
308#[doc = "`read()` method returns [ch0_interact::R](R) reader structure"]
309impl crate::Readable for CH0_INTERACT_SPEC {
310    type Reader = R;
311}
312#[doc = "`write(|w| ..)` method takes [ch0_interact::W](W) writer structure"]
313impl crate::Writable for CH0_INTERACT_SPEC {
314    type Writer = W;
315    const ZERO_TO_MODIFY_FIELDS_BITMAP: Self::Ux = 0;
316    const ONE_TO_MODIFY_FIELDS_BITMAP: Self::Ux = 0;
317}
318#[doc = "`reset()` method sets CH0_INTERACT to value 0"]
319impl crate::Resettable for CH0_INTERACT_SPEC {
320    const RESET_VALUE: Self::Ux = 0;
321}
efm32gg_pac/efm32gg230/lesense/ch0_interact.rs

efm32gg_pac/efm32gg230/lesense/
ch0_interact.rs
