[−][src]Struct edgebadge::gpio::Pb18

pub struct Pb18<MODE> { /* fields omitted */ }

Represents the IO pin with the matching name.

Methods

`impl<MODE> Pb18<MODE>`[src]

`pub fn into_floating_input(self, port: &mut Port) -> Pb18<Input<Floating>>`[src]

Configures the pin to operate as a floating input

`pub fn into_pull_down_input(self, port: &mut Port) -> Pb18<Input<PullDown>>`[src]

Configures the pin to operate as a pulled down input pin

`pub fn into_pull_up_input(self, port: &mut Port) -> Pb18<Input<PullUp>>`[src]

Configures the pin to operate as a pulled up input pin

`pub fn into_open_drain_output(self, port: &mut Port) -> Pb18<Output<OpenDrain>>`[src]

Configures the pin to operate as an open drain output

`pub fn into_push_pull_output(self, port: &mut Port) -> Pb18<Output<PushPull>>`[src]

Configures the pin to operate as a push-pull output

`impl Pb18<Output<OpenDrain>>`[src]

`pub fn internal_pull_up(&mut self, port: &mut Port, on: bool)`[src]

Control state of the internal pull up

`impl<MODE> Pb18<Output<MODE>>`[src]

`pub fn toggle(&mut self)`[src]

Toggle the logic level of the pin; if it is currently high, set it low and vice versa.

`impl<MODE> Pb18<MODE>`[src]

`pub fn into_function_a(self, port: &mut Port) -> Pb18<PfA>`[src]

Configures the pin to operate with a peripheral

`impl<MODE> Pb18<MODE>`[src]

`pub fn into_function_b(self, port: &mut Port) -> Pb18<PfB>`[src]

Configures the pin to operate with a peripheral

`impl<MODE> Pb18<MODE>`[src]

`pub fn into_function_c(self, port: &mut Port) -> Pb18<PfC>`[src]

Configures the pin to operate with a peripheral

`impl<MODE> Pb18<MODE>`[src]

`pub fn into_function_d(self, port: &mut Port) -> Pb18<PfD>`[src]

Configures the pin to operate with a peripheral

`impl<MODE> Pb18<MODE>`[src]

`pub fn into_function_e(self, port: &mut Port) -> Pb18<PfE>`[src]

Configures the pin to operate with a peripheral

`impl<MODE> Pb18<MODE>`[src]

`pub fn into_function_f(self, port: &mut Port) -> Pb18<PfF>`[src]

Configures the pin to operate with a peripheral

`impl<MODE> Pb18<MODE>`[src]

`pub fn into_function_g(self, port: &mut Port) -> Pb18<PfG>`[src]

Configures the pin to operate with a peripheral

`impl<MODE> Pb18<MODE>`[src]

`pub fn into_function_h(self, port: &mut Port) -> Pb18<PfH>`[src]

Configures the pin to operate with a peripheral

`impl<MODE> Pb18<MODE>`[src]

`pub fn into_function_i(self, port: &mut Port) -> Pb18<PfI>`[src]

Configures the pin to operate with a peripheral

`impl<MODE> Pb18<MODE>`[src]

`pub fn into_function_j(self, port: &mut Port) -> Pb18<PfJ>`[src]

Configures the pin to operate with a peripheral

`impl<MODE> Pb18<MODE>`[src]

`pub fn into_function_k(self, port: &mut Port) -> Pb18<PfK>`[src]

Configures the pin to operate with a peripheral

`impl<MODE> Pb18<MODE>`[src]

`pub fn into_function_l(self, port: &mut Port) -> Pb18<PfL>`[src]

Configures the pin to operate with a peripheral

`impl<MODE> Pb18<MODE>`[src]

`pub fn into_function_m(self, port: &mut Port) -> Pb18<PfM>`[src]

Configures the pin to operate with a peripheral

`impl<MODE> Pb18<MODE>`[src]

`pub fn into_function_n(self, port: &mut Port) -> Pb18<PfN>`[src]

Configures the pin to operate with a peripheral

Trait Implementations

`impl<MODE> IntoFunction<Pb18<PfA>> for Pb18<MODE>`[src]

`fn into_function(self, port: &mut Port) -> Pb18<PfA>`[src]

`impl<MODE> IntoFunction<Pb18<PfB>> for Pb18<MODE>`[src]

`fn into_function(self, port: &mut Port) -> Pb18<PfB>`[src]

`impl<MODE> IntoFunction<Pb18<PfC>> for Pb18<MODE>`[src]

`fn into_function(self, port: &mut Port) -> Pb18<PfC>`[src]

`impl<MODE> IntoFunction<Pb18<PfD>> for Pb18<MODE>`[src]

`fn into_function(self, port: &mut Port) -> Pb18<PfD>`[src]

`impl<MODE> IntoFunction<Pb18<PfE>> for Pb18<MODE>`[src]

`fn into_function(self, port: &mut Port) -> Pb18<PfE>`[src]

`impl<MODE> IntoFunction<Pb18<PfF>> for Pb18<MODE>`[src]

`fn into_function(self, port: &mut Port) -> Pb18<PfF>`[src]

`impl<MODE> IntoFunction<Pb18<PfG>> for Pb18<MODE>`[src]

`fn into_function(self, port: &mut Port) -> Pb18<PfG>`[src]

`impl<MODE> IntoFunction<Pb18<PfH>> for Pb18<MODE>`[src]

`fn into_function(self, port: &mut Port) -> Pb18<PfH>`[src]

`impl<MODE> IntoFunction<Pb18<PfI>> for Pb18<MODE>`[src]

`fn into_function(self, port: &mut Port) -> Pb18<PfI>`[src]

`impl<MODE> IntoFunction<Pb18<PfJ>> for Pb18<MODE>`[src]

`fn into_function(self, port: &mut Port) -> Pb18<PfJ>`[src]

`impl<MODE> IntoFunction<Pb18<PfK>> for Pb18<MODE>`[src]

`fn into_function(self, port: &mut Port) -> Pb18<PfK>`[src]

`impl<MODE> IntoFunction<Pb18<PfL>> for Pb18<MODE>`[src]

`fn into_function(self, port: &mut Port) -> Pb18<PfL>`[src]

`impl<MODE> IntoFunction<Pb18<PfM>> for Pb18<MODE>`[src]

`fn into_function(self, port: &mut Port) -> Pb18<PfM>`[src]

`impl<MODE> IntoFunction<Pb18<PfN>> for Pb18<MODE>`[src]

`fn into_function(self, port: &mut Port) -> Pb18<PfN>`[src]

`impl<MODE> OutputPin for Pb18<Output<MODE>>`[src]

`type Error = ()`

Error type

`fn set_high(&mut self) -> Result<(), <Pb18<Output<MODE>> as OutputPin>::Error>`[src]

`fn set_low(&mut self) -> Result<(), <Pb18<Output<MODE>> as OutputPin>::Error>`[src]

Auto Trait Implementations

`impl<MODE> Send for Pb18<MODE> where MODE: Send,`

`impl<MODE> Sync for Pb18<MODE> where MODE: Sync,`

`impl<MODE> Unpin for Pb18<MODE> where MODE: Unpin,`

Blanket Implementations

`impl<T> Any for T where T: 'static + ?Sized,` [src]

`fn type_id(&self) -> TypeId`[src]

`impl<T> Borrow<T> for T where T: ?Sized,` [src]

`fn borrow(&self) -> &T`[src]

`impl<T> BorrowMut<T> for T where T: ?Sized,` [src]

`fn borrow_mut(&mut self) -> &mut T`[src]

`impl<T> From<T> for T`[src]

`fn from(t: T) -> T`[src]

`impl<T, U> Into<U> for T where U: From<T>,` [src]

`fn into(self) -> U`[src]

`impl<T> OutputPin for T where T: OutputPin,` [src]

`type Error = ()`

Error type

`fn set_low(&mut self) -> Result<(), <T as OutputPin>::Error>`[src]

`fn set_high(&mut self) -> Result<(), <T as OutputPin>::Error>`[src]

`impl<T> Same<T> for T`

`type Output = T`

Should always be Self

`impl<T, U> TryFrom<U> for T where U: Into<T>,` [src]

`type Error = Infallible`

The type returned in the event of a conversion error.

`fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>`[src]

`impl<T, U> TryInto<U> for T where U: TryFrom<T>,` [src]

`type Error = <U as TryFrom<T>>::Error`

The type returned in the event of a conversion error.

`fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>`[src]