dev_prune/

output.rs

// Copyright 2026 VKrishna04
// SPDX-License-Identifier: Apache-2.0

// Pretty-print helpers for terminal output.
//
// Provides colored, formatted output for CLI commands and terminal spinners.

use colored::Colorize;
use indicatif::{ProgressBar, ProgressStyle};
use std::path::Path;
use std::time::Duration;
use unicode_width::{UnicodeWidthChar, UnicodeWidthStr};

/// Truncate `s` to at most `cells` terminal columns, marking the cut with an ellipsis.
///
/// Returns a string exactly `cells` columns wide whenever it truncates. A wide
/// character straddling the boundary is dropped rather than split, which can leave the
/// result one column short — the trailing space closes that gap, so callers can rely on
/// the width being exact.
pub fn truncate_display(s: &str, cells: usize) -> String {
    if UnicodeWidthStr::width(s) <= cells {
        return s.to_string();
    }
    if cells == 0 {
        return String::new();
    }
    // One column is reserved for the ellipsis itself.
    let budget = cells - 1;
    let mut out = String::new();
    let mut used = 0usize;
    for c in s.chars() {
        let w = UnicodeWidthChar::width(c).unwrap_or(0);
        if used + w > budget {
            break;
        }
        out.push(c);
        used += w;
    }
    out.push('…');
    used += 1;
    out.extend(std::iter::repeat_n(' ', cells.saturating_sub(used)));
    out
}

/// Left-align `s` in a column exactly `cells` terminal columns wide.
///
/// This is `{:<width$}` corrected for the fact that Rust pads to a count of `char`s and
/// a terminal draws in columns. A CJK or emoji character occupies two of them, so a
/// path whose name is eight Chinese characters measures 8 and draws 16 — and under
/// `{:<35}` every column to its right shifts by eight. Anything wider than the column
/// is truncated rather than allowed to push its neighbours off the edge.
pub fn pad_display(s: &str, cells: usize) -> String {
    let width = UnicodeWidthStr::width(s);
    if width > cells {
        return truncate_display(s, cells);
    }
    let mut out = s.to_string();
    out.extend(std::iter::repeat_n(' ', cells - width));
    out
}

/// Helper to strip Windows UNC `\\?\` prefix, macOS `/private/` prefix, and collapse double slashes.
pub fn clean_path<P: AsRef<Path>>(path: P) -> String {
    let s = path.as_ref().display().to_string();
    // `\\?\UNC\server\share` is the verbatim spelling of `\\server\share` — dropping
    // the whole prefix must put the `\\` back, or the result names a relative path
    // `UNC\server\share` that nothing can open.
    let s = if let Some(stripped) = s.strip_prefix(r"\\?\UNC\") {
        format!(r"\\{stripped}")
    } else if let Some(stripped) = s.strip_prefix(r"\\?\") {
        stripped.to_string()
    } else {
        s
    };
    let s = if let Some(stripped) = s.strip_prefix("/private/var/") {
        format!("/var/{stripped}")
    } else if let Some(stripped) = s.strip_prefix("/private/tmp/") {
        format!("/tmp/{stripped}")
    } else {
        s
    };
    // Collapse doubled separators left by path joins — but never a leading `//`:
    // `//server/share` names a network share, and `/server/share` does not. A single
    // `replace` also leaves `///` half-collapsed, so loop until settled.
    let (head, tail) = match s.strip_prefix("//") {
        Some(rest) => ("//", rest),
        None => ("", s.as_str()),
    };
    let mut tail = tail.to_string();
    while tail.contains("//") {
        tail = tail.replace("//", "/");
    }
    format!("{head}{tail}")
}

/// Reduce a package manager's failure output to the part that says what went wrong.
///
/// A failing `npm ci` prints its entire usage screen — around a hundred and twenty lines
/// of flags — and dev-prune used to relay every one of them into the middle of a prune
/// report. The three lines that identified the problem were somewhere in there, and the
/// report they were in became unreadable.
///
/// So: if any line looks like a diagnostic, show only those; otherwise show the first
/// few lines, which is where a tool that is not npm usually puts its complaint. The
/// count of what was dropped is always printed, and the line naming a full log file is
/// always kept — the whole point of condensing is that the full text stays reachable.
pub fn condense_tool_output(raw: &str, max_lines: usize) -> String {
    let lines: Vec<&str> = raw
        .lines()
        .map(str::trim_end)
        .filter(|l| !l.trim().is_empty())
        .collect();
    if lines.len() <= max_lines {
        return lines.join("\n");
    }

    let is_diagnostic = |l: &&str| {
        let low = l.to_lowercase();
        low.contains("error")
            || low.contains("err!")
            || low.contains("fatal")
            || low.contains("failed")
            || low.contains("cannot")
            || low.contains("unable to")
            || low.contains("not found")
            || low.contains("warn")
    };
    // The log-file pointer is the escape hatch, so it survives even when it is neither a
    // diagnostic nor near the top.
    let is_log_pointer = |l: &&str| l.to_lowercase().contains("log of this run can be found");

    let diagnostics: Vec<&str> = lines.iter().copied().filter(is_diagnostic).collect();
    let mut kept: Vec<&str> = if diagnostics.is_empty() {
        lines.iter().copied().take(max_lines).collect()
    } else {
        diagnostics.into_iter().take(max_lines).collect()
    };
    for line in lines.iter().copied().filter(is_log_pointer) {
        if !kept.contains(&line) {
            kept.push(line);
        }
    }

    let dropped = lines.len().saturating_sub(kept.len());
    let mut out = kept.join("\n");
    if dropped > 0 {
        out.push_str(&format!(
            "\n… {dropped} more {} of output",
            plural(dropped, "line", "lines")
        ));
    }
    out
}

/// Create an animated terminal loading spinner for long-running operations.
pub fn create_spinner(msg: &'static str) -> ProgressBar {
    let pb = ProgressBar::new_spinner();
    pb.set_style(
        ProgressStyle::default_spinner()
            .tick_chars("⠋⠙⠹⠸⠼⠴⠦⠧⠇⠏")
            .template("{spinner:.cyan} {msg}")
            .expect("Invalid progress bar template"),
    );
    pb.set_message(msg);
    pb.enable_steady_tick(Duration::from_millis(80));
    pb
}

/// A determinate progress bar for a pass whose total is known up front.
///
/// A spinner says only "still going". Sizing eighty repositories takes long enough that
/// the difference matters: `41/80` and a bar that visibly moves is the difference
/// between waiting and reaching for Ctrl-C. Use it wherever the count is known before
/// the work starts, and [`create_spinner`] only where it genuinely is not.
///
/// Safe to advance from several threads at once — `indicatif` synchronises internally,
/// which is what lets the parallel status scan report from every worker.
pub fn create_progress_bar(msg: &'static str, total: u64) -> ProgressBar {
    let pb = ProgressBar::new(total);
    pb.set_style(
        ProgressStyle::default_bar()
            // Eighth-block partials, so the bar advances smoothly at one repository per
            // step instead of jumping a whole cell every third one.
            .progress_chars("█▉▊▋▌▍▎▏ ")
            .tick_chars("⠋⠙⠹⠸⠼⠴⠦⠧⠇⠏")
            .template("{spinner:.cyan} {msg} {bar:28.green/dim} {pos}/{len}  {elapsed}")
            .expect("Invalid progress bar template"),
    );
    pb.set_message(msg);
    // The spinner has to keep turning between updates: a repository holding a multi-
    // gigabyte dependency tree can hold its worker for seconds, and a frozen bar during
    // that is exactly the impression this is here to avoid.
    pb.enable_steady_tick(Duration::from_millis(80));
    pb
}

/// Color the contents of `backtick` spans — commands, flags, filenames — so the part
/// the user is meant to type or look for stands out from the prose around it.
///
/// Pairs only: an odd trailing backtick is left exactly as typed. The backticks
/// themselves are kept, because the `colored` crate emits no escape codes when stdout
/// is not a terminal (or `NO_COLOR` is set), and in that plain rendering the backticks
/// are what marks the span.
fn highlight_code_spans(msg: &str) -> String {
    if !msg.contains('`') {
        return msg.to_string();
    }
    let mut out = String::with_capacity(msg.len() + 16);
    let mut rest = msg;
    while let Some(start) = rest.find('`') {
        let Some(len) = rest[start + 1..].find('`') else {
            break;
        };
        out.push_str(&rest[..start]);
        out.push('`');
        out.push_str(&rest[start + 1..start + 1 + len].cyan().to_string());
        out.push('`');
        rest = &rest[start + len + 2..];
    }
    out.push_str(rest);
    out
}

/// Print a success message (green checkmark)
pub fn print_success(msg: &str) {
    println!("{} {}", "✓".green().bold(), highlight_code_spans(msg));
}

/// Print a warning message (yellow exclamation)
///
/// To stderr, like errors: warnings can fire while stdout is a pipe or holds a pending
/// `--json` document (adapter drift notices, the criterion note), and a warning printed
/// into that stream is either invisible or a parse error.
pub fn print_warning(msg: &str) {
    eprintln!("{} {}", "⚠".yellow().bold(), highlight_code_spans(msg));
}

/// Print an error message (red X)
pub fn print_error(msg: &str) {
    eprintln!("{} {}", "✗".red().bold(), highlight_code_spans(msg));
}

/// Print an info message (dimmed arrow)
///
/// Dimmed rather than coloured on purpose. Info lines are the most common thing this
/// tool prints, and a bold blue marker on every one of them competes with the ✓ and ⚠
/// that actually need to be noticed — blue is also the worst colour to bet on, being
/// close to unreadable against the default background of several popular terminals.
pub fn print_info(msg: &str) {
    println!("{} {}", "→".dimmed(), highlight_code_spans(msg));
}

/// Print a line in the terminal's dimmed style, with no marker glyph.
///
/// For text that belongs to the item above it rather than being an item of its own —
/// the "and 13 more" under a list. A `→` there would announce it as a new point.
pub fn print_dimmed(msg: &str) {
    println!("{}", highlight_code_spans(msg).dimmed());
}

/// Print a notice to stderr.
///
/// For anything the user should see that is *about* the command rather than part of its
/// output — a deprecated flag, say. It has to be stderr: `--json` promises stdout carries
/// one JSON document and nothing else, and a friendly note printed above it is the
/// difference between a parseable contract and a parse error.
pub fn print_notice(msg: &str) {
    eprintln!("{} {}", "→".dimmed(), highlight_code_spans(msg));
}

/// Widest line this tool will print prose at, however wide the terminal is.
///
/// A paragraph set to the full width of a maximised terminal is measurably harder to
/// read than the same paragraph at ninety columns: the eye loses the line it was on
/// when it travels back to the left edge. Tables and paths are exempt — truncating
/// those loses information, whereas wrapping prose loses nothing.
const MAX_PROSE_WIDTH: usize = 90;

/// Print an explanatory paragraph, wrapped to the terminal and indented under `indent`.
///
/// The alternative is what `devp run` did until a machine with twenty-one unreadable
/// repositories showed it: three-line explanations soft-wrapped by the terminal back to
/// column zero, so the continuation of an indented note started further left than the
/// note did and read as a new item.
pub fn print_wrapped(indent: &str, msg: &str) {
    let width = crossterm::terminal::size()
        .map(|(cols, _)| cols as usize)
        .unwrap_or(MAX_PROSE_WIDTH)
        .min(MAX_PROSE_WIDTH);
    // A terminal narrow enough to make the wrap width zero would loop forever below.
    let room = width.saturating_sub(indent.len()).max(20);

    let mut line = String::new();
    for word in msg.split_whitespace() {
        if !line.is_empty() && line.width() + 1 + word.width() > room {
            println!("{indent}{}", highlight_code_spans(&line));
            line.clear();
        }
        if !line.is_empty() {
            line.push(' ');
        }
        line.push_str(word);
    }
    if !line.is_empty() {
        println!("{indent}{}", highlight_code_spans(&line));
    }
}

/// Print a section header
///
/// Weight, not colour. A header is structure — the reader finds it by scanning down the
/// left edge, which bold already serves. Colouring and underlining it as well spends
/// two more signals on something that was already unambiguous, and leaves the palette
/// with nothing distinct to say when a line genuinely means "this went wrong".
pub fn print_header(msg: &str) {
    println!("\n{}", msg.bold());
}

/// A byte figure styled as "space you got back" — the number this tool exists for.
pub fn format_bytes_styled(bytes: u64) -> String {
    format_bytes(bytes).green().bold().to_string()
}

/// A filesystem path, styled. One place to change if cyan-on-cyan ever clashes.
pub fn styled_path<P: AsRef<Path>>(path: P) -> String {
    clean_path(path).cyan().to_string()
}

/// A package-manager name, deliberately left in the terminal's default colour.
///
/// It used to be magenta, which put a fifth hue on a status row that already carried
/// green, cyan and a state colour — and an adapter name is an identifier, not a status,
/// so the colour was decorating rather than saying anything. Plain text is also what
/// keeps a wall of coloured columns readable: something has to be the resting state.
///
/// Still a function, and still called everywhere an adapter is named, so this stays one
/// decision in one place rather than a hundred call sites to revisit.
pub fn styled_adapter(name: &str) -> String {
    name.to_string()
}

/// Print the dev-prune ASCII art banner
pub fn print_banner() {
    let art = format!(
        r#"
 ___    _____ __     __    ____  ____  _   _ _   _ _____
|  _ \ | ____|\ \   / /   |  _ \|  _ \| | | | \ | | ____|
| | | ||  _|   \ \ / /    | |_) | |_) | | | |  \| |  _|
| |_| || |___   \ V /     |  __/|  _ <| |_| | |\  | |___
|____/ |_____|   \_/      |_|   |_| \_\\___/|_| \_|_____| v{}
"#,
        crate::constants::VERSION
    );
    // Cyan, not a hard-coded RGB. `truecolor` degrades to nothing useful on a 16- or
    // 256-colour terminal, and it ignored the palette the user picked for their own
    // terminal — a named colour honours it and matches the cyan used everywhere else.
    println!("{}", art.cyan().bold());
}

/// Print the one-line credit, if anything is going to read it.
///
/// Gated on stdout being a terminal, which is the whole of the logic — a person watching
/// the command run sees it, a pipe, a redirect, a CI log and every `--json` consumer does
/// not. There is no other condition: no build flag, no environment variable, no check
/// that the binary is called `devp`. Forks are welcome to change
/// [`constants::ATTRIBUTION_LINE`] or delete this function, and nothing anywhere will
/// notice or complain.
pub fn print_attribution() {
    use std::io::IsTerminal;
    if std::io::stdout().is_terminal() {
        println!("{}", crate::constants::ATTRIBUTION_LINE.dimmed());
    }
}

/// Pick the singular or plural form for a count.
///
/// Small, but "Unregistered 1 repositories" is the kind of thing people notice and
/// nothing else in the codebase was doing it consistently.
pub fn plural<'a>(count: usize, one: &'a str, many: &'a str) -> &'a str {
    if count == 1 { one } else { many }
}

/// Format bytes into human-readable string (e.g., "1.2 GB", "450 MB")
pub fn format_bytes(bytes: u64) -> String {
    use humansize::{BINARY, format_size};
    format_size(bytes, BINARY)
}

/// A duration in seconds, at the precision a person would actually say it in.
///
/// Deliberately coarse above a minute: an estimate printed as "14m 37s" claims a second
/// of accuracy that a throughput average over a handful of restores does not have, and
/// reads as a measurement rather than as the guess it is.
pub fn format_seconds(secs: u64) -> String {
    match secs {
        s if s < 60 => format!("{s}s"),
        s if s < 3600 => format!("{}m", s.div_ceil(60)),
        s => {
            let hours = s / 3600;
            let minutes = (s % 3600) / 60;
            if minutes == 0 {
                format!("{hours}h")
            } else {
                format!("{hours}h {minutes}m")
            }
        }
    }
}

/// The suffix explaining bytes a prune does not free because a package-manager store
/// hardlinks them (pnpm, bun). Empty when there is nothing to explain, so call sites
/// can append it unconditionally.
///
/// This line exists because `du` and Explorer report the *apparent* size: without it,
/// "node_modules (40 MiB)" beside a 2 GiB folder reads as a bug rather than as pnpm
/// working exactly as designed.
pub fn shared_note(shared_bytes: u64, adapter: &str) -> String {
    if shared_bytes == 0 {
        String::new()
    } else {
        format!(
            " (+{} hardlinked into the {adapter} store — not counted, the store keeps them)",
            format_bytes(shared_bytes)
        )
    }
}

#[cfg(test)]
mod tests {
    use super::*;

    #[test]
    fn test_format_bytes() {
        assert_eq!(format_bytes(0), "0 B");
        assert_eq!(format_bytes(1024), "1 KiB");
        assert_eq!(format_bytes(1024 * 1024), "1 MiB");
        assert_eq!(format_bytes(1024 * 1024 * 1024), "1 GiB");
    }

    #[test]
    fn code_spans_survive_highlighting_verbatim_when_color_is_off() {
        // The test harness has no TTY, so `colored` emits nothing — which is itself the
        // property under test: piped output must be byte-identical to the input,
        // including the backticks and any odd trailing one.
        colored::control::set_override(false);
        assert_eq!(
            highlight_code_spans("run `devp setup` again"),
            "run `devp setup` again"
        );
        assert_eq!(highlight_code_spans("no spans here"), "no spans here");
        assert_eq!(
            highlight_code_spans("odd `tick remains"),
            "odd `tick remains"
        );
        assert_eq!(
            highlight_code_spans("`a` and `b`, plus `stray"),
            "`a` and `b`, plus `stray"
        );
        colored::control::unset_override();
    }

    #[test]
    fn a_wide_name_is_padded_to_columns_not_to_char_count() {
        // Eight Chinese characters: eight `char`s, sixteen columns. `{:<20}` would add
        // twelve spaces and draw twenty-eight columns wide; this adds four.
        let cjk = "项目目录名称测试";
        assert_eq!(cjk.chars().count(), 8);
        assert_eq!(UnicodeWidthStr::width(cjk), 16);
        let padded = pad_display(cjk, 20);
        assert_eq!(UnicodeWidthStr::width(padded.as_str()), 20);
        assert!(padded.ends_with("    "));
    }

    #[test]
    fn ascii_padding_still_matches_the_format_specifier_it_replaces() {
        assert_eq!(pad_display("repo", 10), format!("{:<10}", "repo"));
        assert_eq!(pad_display("", 3), "   ");
    }

    #[test]
    fn an_overlong_name_is_truncated_rather_than_pushing_the_next_column() {
        let long = "a".repeat(50);
        let out = pad_display(&long, 10);
        assert_eq!(UnicodeWidthStr::width(out.as_str()), 10);
        assert!(out.ends_with('…'));
    }

    #[test]
    fn a_wide_char_straddling_the_cut_is_dropped_and_the_gap_is_closed() {
        // Budget after the ellipsis is 4 columns; the third character would need
        // columns 5–6, so it is dropped and a space keeps the width exact.
        let out = truncate_display("测试字符", 5);
        assert_eq!(UnicodeWidthStr::width(out.as_str()), 5);
        assert!(out.starts_with("测试"));
    }

    #[test]
    fn an_emoji_path_component_counts_as_two_columns() {
        let s = "🚀repo";
        assert_eq!(UnicodeWidthStr::width(s), 6);
        assert_eq!(UnicodeWidthStr::width(pad_display(s, 12).as_str()), 12);
    }

    #[test]
    fn a_zero_width_column_produces_nothing() {
        assert_eq!(truncate_display("anything", 0), "");
    }

    #[test]
    fn test_clean_path() {
        assert_eq!(clean_path(r"\\?\C:\Users\krish"), r"C:\Users\krish");
        assert_eq!(
            clean_path(r"\\?\UNC\server\share\repo"),
            r"\\server\share\repo"
        );
        assert_eq!(clean_path(r"/private/var/tmp/repo"), r"/var/tmp/repo");
        // A leading `//` is a network-share spelling and survives; only the doubled
        // separators inside the path collapse.
        assert_eq!(clean_path(r"//server//share//repo"), r"//server/share/repo");
        assert_eq!(clean_path(r"/home//user///repo"), r"/home/user/repo");
    }

    #[test]
    fn short_output_is_relayed_whole() {
        let raw = "npm error code EUSAGE\nnpm error requires an existing package-lock.json";
        assert_eq!(condense_tool_output(raw, 6), raw);
    }

    #[test]
    fn a_usage_screen_is_reduced_to_its_diagnostics() {
        // The shape that motivated this: `npm ci` failed, printed its whole usage
        // screen, and dev-prune relayed all of it into the middle of a prune report.
        let mut raw = String::from("npm error code EUSAGE\nnpm error\n");
        raw.push_str("Usage:\nnpm ci\n");
        for i in 0..120 {
            raw.push_str(&format!("  --flag-{i} <value>\n"));
        }
        raw.push_str("npm error A complete log of this run can be found in: /tmp/log\n");

        let out = condense_tool_output(&raw, 6);
        assert!(out.contains("EUSAGE"), "{out}");
        // The escape hatch survives even though it is the very last line.
        assert!(out.contains("complete log of this run"), "{out}");
        assert!(!out.contains("--flag-50"), "{out}");
        assert!(out.contains("more lines of output"), "{out}");
    }

    #[test]
    fn output_with_no_diagnostics_keeps_the_top_of_it() {
        // Not every tool marks its complaint. Falling back to the first few lines beats
        // dropping everything, and the count still says what was hidden.
        let raw: String = (0..40).map(|i| format!("line {i}\n")).collect();
        let out = condense_tool_output(&raw, 3);
        assert!(out.starts_with("line 0\nline 1\nline 2\n…"), "{out}");
        assert!(out.contains("37 more lines"), "{out}");
    }

    #[test]
    fn the_dropped_count_never_claims_more_than_there_was() {
        // Blank lines are removed before counting, so a command that padded its output
        // must not be reported as having said more than it did.
        let raw = "a\n\n\nb\n\n\nc\n\n\nd\n";
        let out = condense_tool_output(raw, 2);
        assert!(out.contains("2 more lines"), "{out}");
    }

    #[test]
    fn an_estimate_is_stated_at_the_precision_it_has() {
        assert_eq!(format_seconds(45), "45s");
        // Rounded up: "0m" for a 61-second restore reads as instant.
        assert_eq!(format_seconds(61), "2m");
        assert_eq!(format_seconds(3600), "1h");
        assert_eq!(format_seconds(4500), "1h 15m");
    }
}