pub struct PrimaryControls { /* private fields */ }
Expand description
Primary processor-based VM-execution controls.
A set of bitmask flags useful when setting up PRIMARY_PROCBASED_EXEC_CONTROLS
VMCS field.
See Intel SDM, Volume 3C, Section 24.6.2, Table 24-6.
Implementations
sourceimpl PrimaryControls
impl PrimaryControls
sourcepub const INTERRUPT_WINDOW_EXITING: Self = Self{bits: 1 << 2,}
pub const INTERRUPT_WINDOW_EXITING: Self = Self{bits: 1 << 2,}
Interrupt-window exiting.
sourcepub const USE_TSC_OFFSETTING: Self = Self{bits: 1 << 3,}
pub const USE_TSC_OFFSETTING: Self = Self{bits: 1 << 3,}
Use TSC offsetting.
sourcepub const HLT_EXITING: Self = Self{bits: 1 << 7,}
pub const HLT_EXITING: Self = Self{bits: 1 << 7,}
HLT exiting.
sourcepub const INVLPG_EXITING: Self = Self{bits: 1 << 9,}
pub const INVLPG_EXITING: Self = Self{bits: 1 << 9,}
INVLPG exiting.
sourcepub const MWAIT_EXITING: Self = Self{bits: 1 << 10,}
pub const MWAIT_EXITING: Self = Self{bits: 1 << 10,}
MWAIT exiting.
sourcepub const RDPMC_EXITING: Self = Self{bits: 1 << 11,}
pub const RDPMC_EXITING: Self = Self{bits: 1 << 11,}
RDPMC exiting.
sourcepub const RDTSC_EXITING: Self = Self{bits: 1 << 12,}
pub const RDTSC_EXITING: Self = Self{bits: 1 << 12,}
RDTSC exiting.
sourcepub const CR3_LOAD_EXITING: Self = Self{bits: 1 << 15,}
pub const CR3_LOAD_EXITING: Self = Self{bits: 1 << 15,}
CR3-load exiting.
sourcepub const CR3_STORE_EXITING: Self = Self{bits: 1 << 16,}
pub const CR3_STORE_EXITING: Self = Self{bits: 1 << 16,}
CR3-store exiting.
sourcepub const CR8_LOAD_EXITING: Self = Self{bits: 1 << 19,}
pub const CR8_LOAD_EXITING: Self = Self{bits: 1 << 19,}
CR8-load exiting.
sourcepub const CR8_STORE_EXITING: Self = Self{bits: 1 << 20,}
pub const CR8_STORE_EXITING: Self = Self{bits: 1 << 20,}
CR8-store exiting.
sourcepub const USE_TPR_SHADOW: Self = Self{bits: 1 << 21,}
pub const USE_TPR_SHADOW: Self = Self{bits: 1 << 21,}
Use TPR shadow.
sourcepub const NMI_WINDOW_EXITING: Self = Self{bits: 1 << 22,}
pub const NMI_WINDOW_EXITING: Self = Self{bits: 1 << 22,}
NMI-window exiting.
sourcepub const MOV_DR_EXITING: Self = Self{bits: 1 << 23,}
pub const MOV_DR_EXITING: Self = Self{bits: 1 << 23,}
MOV-DR exiting
sourcepub const UNCOND_IO_EXITING: Self = Self{bits: 1 << 24,}
pub const UNCOND_IO_EXITING: Self = Self{bits: 1 << 24,}
Unconditional I/O exiting.
sourcepub const USE_IO_BITMAPS: Self = Self{bits: 1 << 25,}
pub const USE_IO_BITMAPS: Self = Self{bits: 1 << 25,}
Use I/O bitmaps.
sourcepub const MONITOR_TRAP_FLAG: Self = Self{bits: 1 << 27,}
pub const MONITOR_TRAP_FLAG: Self = Self{bits: 1 << 27,}
Monitor trap flag.
sourcepub const USE_MSR_BITMAPS: Self = Self{bits: 1 << 28,}
pub const USE_MSR_BITMAPS: Self = Self{bits: 1 << 28,}
Use MSR bitmaps.
sourcepub const MONITOR_EXITING: Self = Self{bits: 1 << 29,}
pub const MONITOR_EXITING: Self = Self{bits: 1 << 29,}
MONITOR exiting.
sourcepub const PAUSE_EXITING: Self = Self{bits: 1 << 30,}
pub const PAUSE_EXITING: Self = Self{bits: 1 << 30,}
PAUSE exiting.
sourcepub const SECONDARY_CONTROLS: Self = Self{bits: 1 << 31,}
pub const SECONDARY_CONTROLS: Self = Self{bits: 1 << 31,}
Activate secondary controls.
sourcepub const fn from_bits(bits: u32) -> Option<Self>
pub const fn from_bits(bits: u32) -> Option<Self>
Convert from underlying bit representation, unless that representation contains bits that do not correspond to a flag.
sourcepub const fn from_bits_truncate(bits: u32) -> Self
pub const fn from_bits_truncate(bits: u32) -> Self
Convert from underlying bit representation, dropping any bits that do not correspond to flags.
sourcepub const unsafe fn from_bits_unchecked(bits: u32) -> Self
pub const unsafe fn from_bits_unchecked(bits: u32) -> Self
Convert from underlying bit representation, preserving all bits (even those not corresponding to a defined flag).
Safety
The caller of the bitflags!
macro can chose to allow or
disallow extra bits for their bitflags type.
The caller of from_bits_unchecked()
has to ensure that
all bits correspond to a defined flag or that extra bits
are valid for this bitflags type.
sourcepub const fn intersects(&self, other: Self) -> bool
pub const fn intersects(&self, other: Self) -> bool
Returns true
if there are flags common to both self
and other
.
sourcepub const fn contains(&self, other: Self) -> bool
pub const fn contains(&self, other: Self) -> bool
Returns true
if all of the flags in other
are contained within self
.
sourcepub fn set(&mut self, other: Self, value: bool)
pub fn set(&mut self, other: Self, value: bool)
Inserts or removes the specified flags depending on the passed value.
sourcepub const fn intersection(self, other: Self) -> Self
pub const fn intersection(self, other: Self) -> Self
Returns the intersection between the flags in self
and
other
.
Specifically, the returned set contains only the flags which are
present in both self
and other
.
This is equivalent to using the &
operator (e.g.
ops::BitAnd
), as in flags & other
.
sourcepub const fn union(self, other: Self) -> Self
pub const fn union(self, other: Self) -> Self
Returns the union of between the flags in self
and other
.
Specifically, the returned set contains all flags which are
present in either self
or other
, including any which are
present in both (see Self::symmetric_difference
if that
is undesirable).
This is equivalent to using the |
operator (e.g.
ops::BitOr
), as in flags | other
.
sourcepub const fn difference(self, other: Self) -> Self
pub const fn difference(self, other: Self) -> Self
Returns the difference between the flags in self
and other
.
Specifically, the returned set contains all flags present in
self
, except for the ones present in other
.
It is also conceptually equivalent to the “bit-clear” operation:
flags & !other
(and this syntax is also supported).
This is equivalent to using the -
operator (e.g.
ops::Sub
), as in flags - other
.
sourcepub const fn symmetric_difference(self, other: Self) -> Self
pub const fn symmetric_difference(self, other: Self) -> Self
Returns the symmetric difference between the flags
in self
and other
.
Specifically, the returned set contains the flags present which
are present in self
or other
, but that are not present in
both. Equivalently, it contains the flags present in exactly
one of the sets self
and other
.
This is equivalent to using the ^
operator (e.g.
ops::BitXor
), as in flags ^ other
.
sourcepub const fn complement(self) -> Self
pub const fn complement(self) -> Self
Returns the complement of this set of flags.
Specifically, the returned set contains all the flags which are
not set in self
, but which are allowed for this type.
Alternatively, it can be thought of as the set difference
between Self::all()
and self
(e.g. Self::all() - self
)
This is equivalent to using the !
operator (e.g.
ops::Not
), as in !flags
.
Trait Implementations
sourceimpl Binary for PrimaryControls
impl Binary for PrimaryControls
sourceimpl BitAnd<PrimaryControls> for PrimaryControls
impl BitAnd<PrimaryControls> for PrimaryControls
type Output = PrimaryControls
type Output = PrimaryControls
The resulting type after applying the &
operator.
sourceimpl BitAndAssign<PrimaryControls> for PrimaryControls
impl BitAndAssign<PrimaryControls> for PrimaryControls
sourcefn bitand_assign(&mut self, other: Self)
fn bitand_assign(&mut self, other: Self)
Disables all flags disabled in the set.
sourceimpl BitOr<PrimaryControls> for PrimaryControls
impl BitOr<PrimaryControls> for PrimaryControls
sourcefn bitor(self, other: PrimaryControls) -> Self
fn bitor(self, other: PrimaryControls) -> Self
Returns the union of the two sets of flags.
type Output = PrimaryControls
type Output = PrimaryControls
The resulting type after applying the |
operator.
sourceimpl BitOrAssign<PrimaryControls> for PrimaryControls
impl BitOrAssign<PrimaryControls> for PrimaryControls
sourcefn bitor_assign(&mut self, other: Self)
fn bitor_assign(&mut self, other: Self)
Adds the set of flags.
sourceimpl BitXor<PrimaryControls> for PrimaryControls
impl BitXor<PrimaryControls> for PrimaryControls
sourcefn bitxor(self, other: Self) -> Self
fn bitxor(self, other: Self) -> Self
Returns the left flags, but with all the right flags toggled.
type Output = PrimaryControls
type Output = PrimaryControls
The resulting type after applying the ^
operator.
sourceimpl BitXorAssign<PrimaryControls> for PrimaryControls
impl BitXorAssign<PrimaryControls> for PrimaryControls
sourcefn bitxor_assign(&mut self, other: Self)
fn bitxor_assign(&mut self, other: Self)
Toggles the set of flags.
sourceimpl Clone for PrimaryControls
impl Clone for PrimaryControls
sourcefn clone(&self) -> PrimaryControls
fn clone(&self) -> PrimaryControls
Returns a copy of the value. Read more
1.0.0 · sourcefn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
Performs copy-assignment from source
. Read more
sourceimpl Debug for PrimaryControls
impl Debug for PrimaryControls
sourceimpl Extend<PrimaryControls> for PrimaryControls
impl Extend<PrimaryControls> for PrimaryControls
sourcefn extend<T: IntoIterator<Item = Self>>(&mut self, iterator: T)
fn extend<T: IntoIterator<Item = Self>>(&mut self, iterator: T)
Extends a collection with the contents of an iterator. Read more
sourcefn extend_one(&mut self, item: A)
fn extend_one(&mut self, item: A)
extend_one
)Extends a collection with exactly one element.
sourcefn extend_reserve(&mut self, additional: usize)
fn extend_reserve(&mut self, additional: usize)
extend_one
)Reserves capacity in a collection for the given number of additional elements. Read more
sourceimpl FromIterator<PrimaryControls> for PrimaryControls
impl FromIterator<PrimaryControls> for PrimaryControls
sourcefn from_iter<T: IntoIterator<Item = Self>>(iterator: T) -> Self
fn from_iter<T: IntoIterator<Item = Self>>(iterator: T) -> Self
Creates a value from an iterator. Read more
sourceimpl Hash for PrimaryControls
impl Hash for PrimaryControls
sourceimpl LowerHex for PrimaryControls
impl LowerHex for PrimaryControls
sourceimpl Not for PrimaryControls
impl Not for PrimaryControls
type Output = PrimaryControls
type Output = PrimaryControls
The resulting type after applying the !
operator.
sourceimpl Octal for PrimaryControls
impl Octal for PrimaryControls
sourceimpl Ord for PrimaryControls
impl Ord for PrimaryControls
sourceimpl PartialEq<PrimaryControls> for PrimaryControls
impl PartialEq<PrimaryControls> for PrimaryControls
sourcefn eq(&self, other: &PrimaryControls) -> bool
fn eq(&self, other: &PrimaryControls) -> bool
This method tests for self
and other
values to be equal, and is used
by ==
. Read more
sourcefn ne(&self, other: &PrimaryControls) -> bool
fn ne(&self, other: &PrimaryControls) -> bool
This method tests for !=
.
sourceimpl PartialOrd<PrimaryControls> for PrimaryControls
impl PartialOrd<PrimaryControls> for PrimaryControls
sourcefn partial_cmp(&self, other: &PrimaryControls) -> Option<Ordering>
fn partial_cmp(&self, other: &PrimaryControls) -> Option<Ordering>
This method returns an ordering between self
and other
values if one exists. Read more
1.0.0 · sourcefn lt(&self, other: &Rhs) -> bool
fn lt(&self, other: &Rhs) -> bool
This method tests less than (for self
and other
) and is used by the <
operator. Read more
1.0.0 · sourcefn le(&self, other: &Rhs) -> bool
fn le(&self, other: &Rhs) -> bool
This method tests less than or equal to (for self
and other
) and is used by the <=
operator. Read more
sourceimpl Sub<PrimaryControls> for PrimaryControls
impl Sub<PrimaryControls> for PrimaryControls
type Output = PrimaryControls
type Output = PrimaryControls
The resulting type after applying the -
operator.
sourceimpl SubAssign<PrimaryControls> for PrimaryControls
impl SubAssign<PrimaryControls> for PrimaryControls
sourcefn sub_assign(&mut self, other: Self)
fn sub_assign(&mut self, other: Self)
Disables all flags enabled in the set.
sourceimpl UpperHex for PrimaryControls
impl UpperHex for PrimaryControls
impl Copy for PrimaryControls
impl Eq for PrimaryControls
impl StructuralEq for PrimaryControls
impl StructuralPartialEq for PrimaryControls
Auto Trait Implementations
impl RefUnwindSafe for PrimaryControls
impl Send for PrimaryControls
impl Sync for PrimaryControls
impl Unpin for PrimaryControls
impl UnwindSafe for PrimaryControls
Blanket Implementations
sourceimpl<T> BorrowMut<T> for T where
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized,
const: unstable · sourcefn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more