[−]Struct x86::controlregs::Cr4
Methods
impl Cr4
pub const CR4_ENABLE_PROTECTION_KEY: Cr4
Enables use of Protection Keys (MPK).
pub const CR4_ENABLE_SMAP: Cr4
Enable Supervisor Mode Access Prevention.
pub const CR4_ENABLE_SMEP: Cr4
Enable Supervisor Mode Execution Protection.
pub const CR4_ENABLE_OS_XSAVE: Cr4
Enable XSAVE and Processor Extended States.
pub const CR4_ENABLE_PCID: Cr4
Enables process-context identifiers (PCIDs).
pub const CR4_ENABLE_FSGSBASE: Cr4
Enables the instructions RDFSBASE, RDGSBASE, WRFSBASE, and WRGSBASE.
pub const CR4_ENABLE_SMX: Cr4
Enables Safer Mode Extensions (Trusted Execution Technology (TXT)).
pub const CR4_ENABLE_VMX: Cr4
Enables Virtual Machine Extensions.
pub const CR4_ENABLE_LA57: Cr4
Enables 5-Level Paging.
pub const CR4_ENABLE_UMIP: Cr4
Enable User-Mode Instruction Prevention (the SGDT, SIDT, SLDT, SMSW and STR instructions cannot be executed if CPL > 0).
pub const CR4_UNMASKED_SSE: Cr4
Enables unmasked SSE exceptions.
pub const CR4_ENABLE_SSE: Cr4
Enables Streaming SIMD Extensions (SSE) instructions and fast FPU save & restore FXSAVE and FXRSTOR instructions.
pub const CR4_ENABLE_PPMC: Cr4
Enable Performance-Monitoring Counters
pub const CR4_ENABLE_GLOBAL_PAGES: Cr4
Enable shared (PDE or PTE) address translation between address spaces.
pub const CR4_ENABLE_MACHINE_CHECK: Cr4
Enable machine check interrupts.
pub const CR4_ENABLE_PAE: Cr4
Enable: Physical Address Extension (allows to address physical memory larger than 4 GiB).
pub const CR4_ENABLE_PSE: Cr4
Enable Page Size Extensions (allows for pages larger than the traditional 4 KiB size) Note: If Physical Address Extension (PAE) is used, the size of large pages is reduced from 4 MiB down to 2 MiB, and PSE is always enabled, regardless of the PSE bit in CR4.
pub const CR4_DEBUGGING_EXTENSIONS: Cr4
If set, enables debug register based breaks on I/O space access.
pub const CR4_TIME_STAMP_DISABLE: Cr4
If set, disables ability to take time-stamps.
pub const CR4_VIRTUAL_INTERRUPTS: Cr4
If set, enables support for the virtual interrupt flag (VIF) in protected mode.
pub const CR4_ENABLE_VME: Cr4
If set, enables support for the virtual interrupt flag (VIF) in virtual-8086 mode.
pub const fn empty() -> Cr4
Returns an empty set of flags
pub const fn all() -> Cr4
Returns the set containing all flags.
pub const fn bits(&self) -> usize
Returns the raw value of the flags currently stored.
pub fn from_bits(bits: usize) -> Option<Cr4>
Convert from underlying bit representation, unless that representation contains bits that do not correspond to a flag.
pub const fn from_bits_truncate(bits: usize) -> Cr4
Convert from underlying bit representation, dropping any bits that do not correspond to flags.
pub const fn is_empty(&self) -> bool
Returns true
if no flags are currently stored.
pub const fn is_all(&self) -> bool
Returns true
if all flags are currently set.
pub const fn intersects(&self, other: Cr4) -> bool
Returns true
if there are flags common to both self
and other
.
pub const fn contains(&self, other: Cr4) -> bool
Returns true
all of the flags in other
are contained within self
.
pub fn insert(&mut self, other: Cr4)
Inserts the specified flags in-place.
pub fn remove(&mut self, other: Cr4)
Removes the specified flags in-place.
pub fn toggle(&mut self, other: Cr4)
Toggles the specified flags in-place.
pub fn set(&mut self, other: Cr4, value: bool)
Inserts or removes the specified flags depending on the passed value.
Trait Implementations
impl Debug for Cr4
impl PartialEq<Cr4> for Cr4
impl Eq for Cr4
impl Ord for Cr4
fn cmp(&self, other: &Cr4) -> Ordering
fn max(self, other: Self) -> Self
1.21.0[src]
Compares and returns the maximum of two values. Read more
fn min(self, other: Self) -> Self
1.21.0[src]
Compares and returns the minimum of two values. Read more
fn clamp(self, min: Self, max: Self) -> Self
[src]
clamp
)Restrict a value to a certain interval. Read more
impl PartialOrd<Cr4> for Cr4
fn partial_cmp(&self, other: &Cr4) -> Option<Ordering>
fn lt(&self, other: &Cr4) -> bool
fn le(&self, other: &Cr4) -> bool
fn gt(&self, other: &Cr4) -> bool
fn ge(&self, other: &Cr4) -> bool
impl Sub<Cr4> for Cr4
type Output = Cr4
The resulting type after applying the -
operator.
fn sub(self, other: Cr4) -> Cr4
Returns the set difference of the two sets of flags.
impl SubAssign<Cr4> for Cr4
fn sub_assign(&mut self, other: Cr4)
Disables all flags enabled in the set.
impl Not for Cr4
type Output = Cr4
The resulting type after applying the !
operator.
fn not(self) -> Cr4
Returns the complement of this set of flags.
impl BitAnd<Cr4> for Cr4
type Output = Cr4
The resulting type after applying the &
operator.
fn bitand(self, other: Cr4) -> Cr4
Returns the intersection between the two sets of flags.
impl BitOr<Cr4> for Cr4
type Output = Cr4
The resulting type after applying the |
operator.
fn bitor(self, other: Cr4) -> Cr4
Returns the union of the two sets of flags.
impl BitXor<Cr4> for Cr4
type Output = Cr4
The resulting type after applying the ^
operator.
fn bitxor(self, other: Cr4) -> Cr4
Returns the left flags, but with all the right flags toggled.
impl BitAndAssign<Cr4> for Cr4
fn bitand_assign(&mut self, other: Cr4)
Disables all flags disabled in the set.
impl BitOrAssign<Cr4> for Cr4
fn bitor_assign(&mut self, other: Cr4)
Adds the set of flags.
impl BitXorAssign<Cr4> for Cr4
fn bitxor_assign(&mut self, other: Cr4)
Toggles the set of flags.
impl Hash for Cr4
fn hash<__H: Hasher>(&self, state: &mut __H)
fn hash_slice<H>(data: &[Self], state: &mut H) where
H: Hasher,
1.3.0[src]
H: Hasher,
Feeds a slice of this type into the given [Hasher
]. Read more
impl Extend<Cr4> for Cr4
fn extend<T: IntoIterator<Item = Cr4>>(&mut self, iterator: T)
impl FromIterator<Cr4> for Cr4
fn from_iter<T: IntoIterator<Item = Cr4>>(iterator: T) -> Cr4
impl Copy for Cr4
impl Octal for Cr4
impl Binary for Cr4
impl LowerHex for Cr4
impl UpperHex for Cr4
impl Clone for Cr4
fn clone(&self) -> Cr4
fn clone_from(&mut self, source: &Self)
1.0.0[src]
Performs copy-assignment from source
. Read more
Auto Trait Implementations
Blanket Implementations
impl<T, U> TryFrom<U> for T where
U: Into<T>,
[src]
U: Into<T>,
type Error = Infallible
The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
impl<T, U> Into<U> for T where
U: From<T>,
[src]
U: From<T>,
impl<T> From<T> for T
[src]
impl<T, U> TryInto<U> for T where
U: TryFrom<T>,
[src]
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
[src]
impl<T> Borrow<T> for T where
T: ?Sized,
[src]
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized,
[src]
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
impl<T> Any for T where
T: 'static + ?Sized,
[src]
T: 'static + ?Sized,