Crate w5500_regsim[−][src]
Register simulation for the Wiznet W5500 internet offload chip.
This implements the w5500_ll::Registers
trait using std::net
sockets
to simulate the W5500 on your local PC.
This is a best-effort implementation to aid in development of application code, not all features of the W5500 will be fully simulated.
Examples
See the w5500-hl
crate for examples.
Notes
This is in an early alpha state, there are many todos throughout the code.
Bug reports will not be accepted until this reaches 0.1.0
.
Pull requests are always welcome.
Not-implemented
- MR (Mode Register)
- Wake on LAN
- Ping block
- PPPoE mode
- Force ARP
- INTLEVEL (Interrupt Low Level Timer Register)
- IR (Interrupt Register)
- IMR (Interrupt Mask Register)
- GAR (Gateway IP Address Register)
- SUBR (Subnet Mask Register)
- SHAR (Source Hardware Address Register)
- SIPR (Source IP Address Register)
- INTLEVEL (Interrupt Low Level Timer Register)
- IR (Interrupt Register)
- IMR (Interrupt Mask Register)
- SIR (Socket Interrupt Register)
- SIMR (Socket Interrupt Mask Register)
- RTR (Retry Time Register)
- RCR (Retry Count Register)
- PTIMER (PPP LCP Request Timer Register)
- PMAGIC (PPP LCP Magic Number Register)
- PHAR (PPP Destination MAC Address Register)
- PSID (PPP Session Identification Register)
- PMRU (PPP Maximum Segment Size Register)
- UIPR (Unreachable IP Address Register)
- UPORT (Unreachable Port Register)
- PHYCFGR (PHY Configuration Register)
- SN_MR (Socket n Mode Register)
- SN_IR (Socket n Interrupt Register)
- DISCON
- TIMEOUT
- SENDOK
- SN_SR (Socket n Status Register)
- SynSent
- SynRecv
- FinWait
- Closing
- TimeWait
- CloseWait
- LastAck
- Macraw
- SN_MSSR (Socket n Maximum Segment Size Register)
- SN_TOS (Socket n IP TOS Register)
- SN_TTL (Socket n IP TTL)
- SN_RXBUF_SIZE (Socket n Receive Buffer Size Register)
- SN_TXBUF_SIZE (Socket n Transmit Buffer Size Register)
- SN_IMR (Socket n Interrupt Mask Register)
- SN_FRAG (Socket n Fragment Offset in IP Header Register)
- SN_KPALVTR (Socket n Keep Alive Timer Register)
Believe it or not that is not simply a list of all registers.
Assumptions
- Your PC is connected to a network, and has a valid IPv4 address.
- You are not using the
read
andwrite
methods directly.
Re-exports
pub use w5500_ll; |
Structs
W5500 | Simulated W5500. |
Traits
Registers | W5500 register setters and getters. |