[][src]Struct tinkerforge::real_time_clock_bricklet::RealTimeClockBricklet

pub struct RealTimeClockBricklet { /* fields omitted */ }

Battery-backed real-time clock

Methods

impl RealTimeClockBricklet[src]

pub const DEVICE_IDENTIFIER: u16[src]

pub const DEVICE_DISPLAY_NAME: &'static str[src]

pub fn new<T: GetRequestSender>(
    uid: &str,
    req_sender: T
) -> RealTimeClockBricklet
[src]

Creates an object with the unique device ID uid. This object can then be used after the IP Connection ip_connection is connected.

pub fn get_response_expected(
    &mut self,
    fun: RealTimeClockBrickletFunction
) -> Result<bool, GetResponseExpectedError>
[src]

Returns the response expected flag for the function specified by the function ID parameter. It is true if the function is expected to send a response, false otherwise.

For getter functions this is enabled by default and cannot be disabled, because those functions will always send a response. For callback configuration functions it is enabled by default too, but can be disabled by set_response_expected. For setter functions it is disabled by default and can be enabled.

Enabling the response expected flag for a setter function allows to detect timeouts and other error conditions calls of this setter as well. The device will then send a response for this purpose. If this flag is disabled for a setter function then no response is send and errors are silently ignored, because they cannot be detected.

See set_response_expected for the list of function ID constants available for this function.

pub fn set_response_expected(
    &mut self,
    fun: RealTimeClockBrickletFunction,
    response_expected: bool
) -> Result<(), SetResponseExpectedError>
[src]

Changes the response expected flag of the function specified by the function ID parameter. This flag can only be changed for setter (default value: false) and callback configuration functions (default value: true). For getter functions it is always enabled.

Enabling the response expected flag for a setter function allows to detect timeouts and other error conditions calls of this setter as well. The device will then send a response for this purpose. If this flag is disabled for a setter function then no response is send and errors are silently ignored, because they cannot be detected.

pub fn set_response_expected_all(&mut self, response_expected: bool)[src]

Changes the response expected flag for all setter and callback configuration functions of this device at once.

pub fn get_api_version(&self) -> [u8; 3][src]

Returns the version of the API definition (major, minor, revision) implemented by this API bindings. This is neither the release version of this API bindings nor does it tell you anything about the represented Brick or Bricklet.

pub fn get_date_time_callback_receiver(
    &self
) -> ConvertingCallbackReceiver<DateTimeEvent>
[src]

This receiver is triggered periodically with the period that is set by set_date_time_callback_period. The parameters are the same as for get_date_time and get_timestamp combined.

The get_date_time_callback_receiver receiver is only triggered if the date or time changed since the last triggering.

.. versionadded:: 2.0.1$nbsp;(Plugin)

pub fn get_alarm_callback_receiver(
    &self
) -> ConvertingCallbackReceiver<AlarmEvent>
[src]

This receiver is triggered every time the current date and time matches the configured alarm (see set_alarm). The parameters are the same as for get_date_time and get_timestamp combined.

.. versionadded:: 2.0.1$nbsp;(Plugin)

pub fn set_date_time(
    &self,
    year: u16,
    month: u8,
    day: u8,
    hour: u8,
    minute: u8,
    second: u8,
    centisecond: u8,
    weekday: u8
) -> ConvertingReceiver<()>
[src]

Sets the current date (including weekday) and the current time with hundredths of a second resolution.

Possible value ranges:

  • Year: 2000 to 2099
  • Month: 1 to 12 (January to December)
  • Day: 1 to 31
  • Hour: 0 to 23
  • Minute: 0 to 59
  • Second: 0 to 59
  • Centisecond: 0 to 99
  • Weekday: 1 to 7 (Monday to Sunday)

If the backup battery is installed then the real-time clock keeps date and time even if the Bricklet is not powered by a Brick.

The real-time clock handles leap year and inserts the 29th of February accordingly. But leap seconds, time zones and daylight saving time are not handled.

Associated constants:

  • REAL_TIME_CLOCK_BRICKLET_WEEKDAY_MONDAY
  • REAL_TIME_CLOCK_BRICKLET_WEEKDAY_TUESDAY
  • REAL_TIME_CLOCK_BRICKLET_WEEKDAY_WEDNESDAY
  • REAL_TIME_CLOCK_BRICKLET_WEEKDAY_THURSDAY
  • REAL_TIME_CLOCK_BRICKLET_WEEKDAY_FRIDAY
  • REAL_TIME_CLOCK_BRICKLET_WEEKDAY_SATURDAY
  • REAL_TIME_CLOCK_BRICKLET_WEEKDAY_SUNDAY

pub fn get_date_time(&self) -> ConvertingReceiver<DateTime>[src]

Returns the current date (including weekday) and the current time of the real-time clock with hundredths of a second resolution.

Associated constants:

  • REAL_TIME_CLOCK_BRICKLET_WEEKDAY_MONDAY
  • REAL_TIME_CLOCK_BRICKLET_WEEKDAY_TUESDAY
  • REAL_TIME_CLOCK_BRICKLET_WEEKDAY_WEDNESDAY
  • REAL_TIME_CLOCK_BRICKLET_WEEKDAY_THURSDAY
  • REAL_TIME_CLOCK_BRICKLET_WEEKDAY_FRIDAY
  • REAL_TIME_CLOCK_BRICKLET_WEEKDAY_SATURDAY
  • REAL_TIME_CLOCK_BRICKLET_WEEKDAY_SUNDAY

pub fn get_timestamp(&self) -> ConvertingReceiver<i64>[src]

Returns the current date and the time of the real-time clock converted to milliseconds. The timestamp has an effective resolution of hundredths of a second.

pub fn set_offset(&self, offset: i8) -> ConvertingReceiver<()>[src]

Sets the offset the real-time clock should compensate for in 2.17 ppm steps between -277.76 ppm (-128) and +275.59 ppm (127).

The real-time clock time can deviate from the actual time due to the frequency deviation of its 32.768 kHz crystal. Even without compensation (factory default) the resulting time deviation should be at most ±20 ppm (±52.6 seconds per month).

This deviation can be calculated by comparing the same duration measured by the real-time clock (rtc_duration) an accurate reference clock (ref_duration).

For best results the configured offset should be set to 0 ppm first and then a duration of at least 6 hours should be measured.

The new offset (new_offset) can be calculated from the currently configured offset (current_offset) and the measured durations as follow::

new_offset = current_offset - round(1000000 * (rtc_duration - ref_duration) / rtc_duration / 2.17)

If you want to calculate the offset, then we recommend using the calibration dialog in Brick Viewer, instead of doing it manually.

The offset is saved in the EEPROM of the Bricklet and only needs to be configured once.

pub fn get_offset(&self) -> ConvertingReceiver<i8>[src]

Returns the offset as set by set_offset.

pub fn set_date_time_callback_period(
    &self,
    period: u32
) -> ConvertingReceiver<()>
[src]

Sets the period with which the get_date_time_callback_receiver receiver is triggered periodically. A value of 0 turns the receiver off.

The get_date_time_callback_receiver Receiver is only triggered if the date or time changed since the last triggering.

.. versionadded:: 2.0.1$nbsp;(Plugin)

pub fn get_date_time_callback_period(&self) -> ConvertingReceiver<u32>[src]

Returns the period as set by set_date_time_callback_period.

.. versionadded:: 2.0.1$nbsp;(Plugin)

pub fn set_alarm(
    &self,
    month: i8,
    day: i8,
    hour: i8,
    minute: i8,
    second: i8,
    weekday: i8,
    interval: i32
) -> ConvertingReceiver<()>
[src]

Configures a repeatable alarm. The get_alarm_callback_receiver receiver is triggered if the current date and time matches the configured alarm.

Setting a parameter to -1 means that it should be disabled and doesn't take part in the match. Setting all parameters to -1 disables the alarm completely.

For example, to make the alarm trigger every day at 7:30 AM it can be configured as (-1, -1, 7, 30, -1, -1, -1). The hour is set to match 7 and the minute is set to match 30. The alarm is triggered if all enabled parameters match.

The interval has a special role. It allows to make the alarm reconfigure itself. This is useful if you need a repeated alarm that cannot be expressed by matching the current date and time. For example, to make the alarm trigger every 23 seconds it can be configured as (-1, -1, -1, -1, -1, -1, 23). Internally the Bricklet will take the current date and time, add 23 seconds to it and set the result as its alarm. The first alarm will be triggered 23 seconds after the call. Because the interval is not -1, the Bricklet will do the same again internally, take the current date and time, add 23 seconds to it and set that as its alarm. This results in a repeated alarm that triggers every 23 seconds.

The interval can also be used in combination with the other parameters. For example, configuring the alarm as (-1, -1, 7, 30, -1, -1, 300) results in an alarm that triggers every day at 7:30 AM and is then repeated every 5 minutes.

.. versionadded:: 2.0.1$nbsp;(Plugin)

Associated constants:

  • REAL_TIME_CLOCK_BRICKLET_ALARM_MATCH_DISABLED
  • REAL_TIME_CLOCK_BRICKLET_ALARM_INTERVAL_DISABLED

pub fn get_alarm(&self) -> ConvertingReceiver<Alarm>[src]

Returns the alarm configuration as set by set_alarm.

.. versionadded:: 2.0.1$nbsp;(Plugin)

Associated constants:

  • REAL_TIME_CLOCK_BRICKLET_ALARM_MATCH_DISABLED
  • REAL_TIME_CLOCK_BRICKLET_ALARM_INTERVAL_DISABLED

pub fn get_identity(&self) -> ConvertingReceiver<Identity>[src]

Returns the UID, the UID where the Bricklet is connected to, the position, the hardware and firmware version as well as the device identifier.

The position can be 'a', 'b', 'c' or 'd'.

The device identifier numbers can be found here. |device_identifier_constant|

Trait Implementations

impl Clone for RealTimeClockBricklet[src]

Auto Trait Implementations

Blanket Implementations

impl<T> From<T> for T[src]

impl<T, U> Into<U> for T where
    U: From<T>, 
[src]

impl<T> ToOwned for T where
    T: Clone
[src]

type Owned = T

The resulting type after obtaining ownership.

impl<T, U> TryFrom<U> for T where
    U: Into<T>, 
[src]

type Error = !

The type returned in the event of a conversion error.

impl<T, U> TryInto<U> for T where
    U: TryFrom<T>, 
[src]

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.

impl<T> Borrow<T> for T where
    T: ?Sized
[src]

impl<T> BorrowMut<T> for T where
    T: ?Sized
[src]

impl<T> Any for T where
    T: 'static + ?Sized
[src]

impl<T> Same<T> for T

type Output = T

Should always be Self