Enum symbolic::debuginfo::pe::UnwindOperation
source · pub enum UnwindOperation {
PushNonVolatile(Register),
Alloc(u32),
SetFPRegister,
SaveNonVolatile(Register, StackFrameOffset),
SaveXMM(Register, StackFrameOffset),
Epilog,
SaveXMM128(Register, StackFrameOffset),
PushMachineFrame(bool),
Noop,
}
Expand description
An unwind operation corresponding to code in the function prolog.
Unwind operations can be used to reverse the effects of the function prolog and restore register values of parent stack frames that have been saved to the stack.
Variants§
PushNonVolatile(Register)
Push a nonvolatile integer register, decrementing RSP
by 8.
Alloc(u32)
Allocate a fixed-size area on the stack.
SetFPRegister
Establish the frame pointer register by setting the register to some offset of the current RSP. The use of an offset permits establishing a frame pointer that points to the middle of the fixed stack allocation, helping code density by allowing more accesses to use short instruction forms.
SaveNonVolatile(Register, StackFrameOffset)
Save a nonvolatile integer register on the stack using a MOV instead of a PUSH. This code is primarily used for shrink-wrapping, where a nonvolatile register is saved to the stack in a position that was previously allocated.
SaveXMM(Register, StackFrameOffset)
Save the lower 64 bits of a nonvolatile XMM register on the stack.
Epilog
Describes the function epilog.
This operation has been introduced with unwind info version 2 and is not implemented yet.
SaveXMM128(Register, StackFrameOffset)
Save all 128 bits of a nonvolatile XMM register on the stack.
PushMachineFrame(bool)
Push a machine frame. This is used to record the effect of a hardware interrupt or exception. Depending on the error flag, this frame has two different layouts.
This unwind code always appears in a dummy prolog, which is never actually executed but instead appears before the real entry point of an interrupt routine, and exists only to provide a place to simulate the push of a machine frame. This operation records that simulation, which indicates the machine has conceptually done this:
- Pop RIP return address from top of stack into
temp
$ss
, Push old$rsp
,$rflags
,$cs
,temp
- If error flag is
true
, push the error code
Without an error code, RSP was incremented by 40
and the following was frame pushed:
Offset | Value |
---|---|
RSP + 32 | $ss |
RSP + 24 | old $rsp |
RSP + 16 | $rflags |
RSP + 8 | $cs |
RSP + 0 | $rip |
With an error code, RSP was incremented by 48
and the following was frame pushed:
Offset | Value |
---|---|
RSP + 40 | $ss |
RSP + 32 | old $rsp |
RSP + 24 | $rflags |
RSP + 16 | $cs |
RSP + 8 | $rip |
RSP + 0 | error code |
Noop
A reserved operation without effect.
Trait Implementations§
source§impl Clone for UnwindOperation
impl Clone for UnwindOperation
source§fn clone(&self) -> UnwindOperation
fn clone(&self) -> UnwindOperation
1.0.0 · source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source
. Read moresource§impl Debug for UnwindOperation
impl Debug for UnwindOperation
source§impl PartialEq for UnwindOperation
impl PartialEq for UnwindOperation
source§fn eq(&self, other: &UnwindOperation) -> bool
fn eq(&self, other: &UnwindOperation) -> bool
self
and other
values to be equal, and is used
by ==
.impl Copy for UnwindOperation
impl Eq for UnwindOperation
impl StructuralPartialEq for UnwindOperation
Auto Trait Implementations§
impl Freeze for UnwindOperation
impl RefUnwindSafe for UnwindOperation
impl Send for UnwindOperation
impl Sync for UnwindOperation
impl Unpin for UnwindOperation
impl UnwindSafe for UnwindOperation
Blanket Implementations§
source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
source§impl<Q, K> Equivalent<K> for Q
impl<Q, K> Equivalent<K> for Q
source§impl<Q, K> Equivalent<K> for Q
impl<Q, K> Equivalent<K> for Q
source§fn equivalent(&self, key: &K) -> bool
fn equivalent(&self, key: &K) -> bool
key
and return true
if they are equal.source§impl<I, T> ExtractContext<I, ()> for T
impl<I, T> ExtractContext<I, ()> for T
source§fn extract_context(self, _original_input: I)
fn extract_context(self, _original_input: I)
source§impl<T> FmtForward for T
impl<T> FmtForward for T
source§fn fmt_binary(self) -> FmtBinary<Self>where
Self: Binary,
fn fmt_binary(self) -> FmtBinary<Self>where
Self: Binary,
self
to use its Binary
implementation when Debug
-formatted.source§fn fmt_display(self) -> FmtDisplay<Self>where
Self: Display,
fn fmt_display(self) -> FmtDisplay<Self>where
Self: Display,
self
to use its Display
implementation when
Debug
-formatted.source§fn fmt_lower_exp(self) -> FmtLowerExp<Self>where
Self: LowerExp,
fn fmt_lower_exp(self) -> FmtLowerExp<Self>where
Self: LowerExp,
self
to use its LowerExp
implementation when
Debug
-formatted.source§fn fmt_lower_hex(self) -> FmtLowerHex<Self>where
Self: LowerHex,
fn fmt_lower_hex(self) -> FmtLowerHex<Self>where
Self: LowerHex,
self
to use its LowerHex
implementation when
Debug
-formatted.source§fn fmt_octal(self) -> FmtOctal<Self>where
Self: Octal,
fn fmt_octal(self) -> FmtOctal<Self>where
Self: Octal,
self
to use its Octal
implementation when Debug
-formatted.source§fn fmt_pointer(self) -> FmtPointer<Self>where
Self: Pointer,
fn fmt_pointer(self) -> FmtPointer<Self>where
Self: Pointer,
self
to use its Pointer
implementation when
Debug
-formatted.source§fn fmt_upper_exp(self) -> FmtUpperExp<Self>where
Self: UpperExp,
fn fmt_upper_exp(self) -> FmtUpperExp<Self>where
Self: UpperExp,
self
to use its UpperExp
implementation when
Debug
-formatted.source§fn fmt_upper_hex(self) -> FmtUpperHex<Self>where
Self: UpperHex,
fn fmt_upper_hex(self) -> FmtUpperHex<Self>where
Self: UpperHex,
self
to use its UpperHex
implementation when
Debug
-formatted.source§impl<T> Instrument for T
impl<T> Instrument for T
source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
source§impl<T> IntoEither for T
impl<T> IntoEither for T
source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left
is true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moresource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left(&self)
returns true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moresource§impl<T> Pipe for Twhere
T: ?Sized,
impl<T> Pipe for Twhere
T: ?Sized,
source§fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> Rwhere
Self: Sized,
fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> Rwhere
Self: Sized,
source§fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> Rwhere
R: 'a,
fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> Rwhere
R: 'a,
self
and passes that borrow into the pipe function. Read moresource§fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> Rwhere
R: 'a,
fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> Rwhere
R: 'a,
self
and passes that borrow into the pipe function. Read moresource§fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R
fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R
source§fn pipe_borrow_mut<'a, B, R>(
&'a mut self,
func: impl FnOnce(&'a mut B) -> R,
) -> R
fn pipe_borrow_mut<'a, B, R>( &'a mut self, func: impl FnOnce(&'a mut B) -> R, ) -> R
source§fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R
fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R
self
, then passes self.as_ref()
into the pipe function.source§fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R
fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R
self
, then passes self.as_mut()
into the pipe
function.source§fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R
fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R
self
, then passes self.deref()
into the pipe function.source§impl<I> RecreateContext<I> for I
impl<I> RecreateContext<I> for I
source§fn recreate_context(_original_input: I, tail: I) -> I
fn recreate_context(_original_input: I, tail: I) -> I
source§impl<T> Tap for T
impl<T> Tap for T
source§fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Self
fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Self
Borrow<B>
of a value. Read moresource§fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Self
fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Self
BorrowMut<B>
of a value. Read moresource§fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Self
fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Self
AsRef<R>
view of a value. Read moresource§fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Self
fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Self
AsMut<R>
view of a value. Read moresource§fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Self
fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Self
Deref::Target
of a value. Read moresource§fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Self
fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Self
Deref::Target
of a value. Read moresource§fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self
fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self
.tap()
only in debug builds, and is erased in release builds.source§fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self
fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self
.tap_mut()
only in debug builds, and is erased in release
builds.source§fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Self
fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Self
.tap_borrow()
only in debug builds, and is erased in release
builds.source§fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Self
fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Self
.tap_borrow_mut()
only in debug builds, and is erased in release
builds.source§fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Self
fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Self
.tap_ref()
only in debug builds, and is erased in release
builds.source§fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Self
fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Self
.tap_ref_mut()
only in debug builds, and is erased in release
builds.source§fn tap_deref_dbg<T>(self, func: impl FnOnce(&T)) -> Self
fn tap_deref_dbg<T>(self, func: impl FnOnce(&T)) -> Self
.tap_deref()
only in debug builds, and is erased in release
builds.