[−][src]Struct stm32l1xx_hal::gpio::gpiof::PF1
Pin
Methods
impl<MODE> PF1<MODE>[src]
pub fn into_floating_input(self) -> PF1<Input<Floating>>[src]
Configures the pin to operate as a floating input pin
pub fn into_pull_down_input(self) -> PF1<Input<PullDown>>[src]
Configures the pin to operate as a pulled down input pin
pub fn into_pull_up_input(self) -> PF1<Input<PullUp>>[src]
Configures the pin to operate as a pulled up input pin
pub fn into_analog(self) -> PF1<Analog>[src]
Configures the pin to operate as an analog pin
pub fn into_open_drain_output(self) -> PF1<Output<OpenDrain>>[src]
Configures the pin to operate as an open drain output pin
pub fn into_push_pull_output(self) -> PF1<Output<PushPull>>[src]
Configures the pin to operate as an push pull output pin
pub fn set_speed(self, speed: Speed) -> Self[src]
Set pin speed
impl<MODE> PF1<Output<MODE>>[src]
pub fn downgrade(self) -> PF<Output<MODE>>[src]
Erases the pin number from the type
This is useful when you want to collect the pins into an array where you need all the elements to have the same type
impl<MODE> PF1<Input<MODE>>[src]
pub fn downgrade(self) -> PF<Input<MODE>>[src]
Erases the pin number from the type
This is useful when you want to collect the pins into an array where you need all the elements to have the same type
Trait Implementations
impl<MODE> OutputPin for PF1<Output<MODE>>[src]
type Error = Infallible
Error type
fn set_high(&mut self) -> Result<(), Self::Error>[src]
fn set_low(&mut self) -> Result<(), Self::Error>[src]
impl<MODE> StatefulOutputPin for PF1<Output<MODE>>[src]
fn is_set_high(&self) -> Result<bool, Self::Error>[src]
fn is_set_low(&self) -> Result<bool, Self::Error>[src]
impl<MODE> Default for PF1<Output<MODE>>[src]
impl<MODE> InputPin for PF1<Output<MODE>>[src]
type Error = Infallible
Error type
fn is_high(&self) -> Result<bool, Self::Error>[src]
fn is_low(&self) -> Result<bool, Self::Error>[src]
impl<MODE> InputPin for PF1<Input<MODE>>[src]
Auto Trait Implementations
impl<MODE> Unpin for PF1<MODE> where
MODE: Unpin,
MODE: Unpin,
impl<MODE> Send for PF1<MODE> where
MODE: Send,
MODE: Send,
impl<MODE> Sync for PF1<MODE> where
MODE: Sync,
MODE: Sync,
Blanket Implementations
impl<T> From<T> for T[src]
impl<T, U> TryFrom<U> for T where
U: Into<T>, [src]
U: Into<T>,
type Error = Infallible
The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>[src]
impl<T, U> Into<U> for T where
U: From<T>, [src]
U: From<T>,
impl<T, U> TryInto<U> for T where
U: TryFrom<T>, [src]
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>[src]
impl<T> Borrow<T> for T where
T: ?Sized, [src]
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized, [src]
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T[src]
impl<T> Any for T where
T: 'static + ?Sized, [src]
T: 'static + ?Sized,
impl<T> OutputPin for T where
T: OutputPin, [src]
T: OutputPin,
type Error = ()
Error type
fn set_low(&mut self) -> Result<(), <T as OutputPin>::Error>[src]
fn set_high(&mut self) -> Result<(), <T as OutputPin>::Error>[src]
impl<T> StatefulOutputPin for T where
T: StatefulOutputPin + OutputPin, [src]
T: StatefulOutputPin + OutputPin,
fn is_set_low(&self) -> Result<bool, <T as OutputPin>::Error>[src]
fn is_set_high(&self) -> Result<bool, <T as OutputPin>::Error>[src]
impl<P> ToggleableOutputPin for P where
P: Default, [src]
P: Default,
type Error = <P as OutputPin>::Error
Error type
fn toggle(&mut self) -> Result<(), <P as ToggleableOutputPin>::Error>[src]
Toggle pin output
impl<T> InputPin for T where
T: InputPin, [src]
T: InputPin,