[−][src]Struct stm32l0xx_hal::gpio::gpioa::PA5

pub struct PA5<MODE> {
    pub i: u8,
    pub port: Port,
    // some fields omitted
}

Pin

Fields

i: u8port: Port

Methods

impl<MODE> PA5<MODE>[src]

pub fn into_floating_input(self) -> PA5<Input<Floating>>[src]

Configures the pin to operate as a floating input pin

pub fn into_pull_down_input(self) -> PA5<Input<PullDown>>[src]

Configures the pin to operate as a pulled down input pin

pub fn into_pull_up_input(self) -> PA5<Input<PullUp>>[src]

Configures the pin to operate as a pulled up input pin

pub fn into_analog(self) -> PA5<Analog>[src]

Configures the pin to operate as an analog pin

pub fn into_open_drain_output(self) -> PA5<Output<OpenDrain>>[src]

Configures the pin to operate as an open drain output pin

pub fn into_push_pull_output(self) -> PA5<Output<PushPull>>[src]

Configures the pin to operate as an push pull output pin

pub fn set_speed(self, speed: Speed) -> Self[src]

Set pin speed

impl<MODE> PA5<Output<MODE>>[src]

pub fn downgrade(self) -> PA<Output<MODE>>[src]

Erases the pin number from the type

This is useful when you want to collect the pins into an array where you need all the elements to have the same type

impl<MODE> PA5<Input<MODE>>[src]

pub fn downgrade(self) -> PA<Input<MODE>>[src]

Erases the pin number from the type

This is useful when you want to collect the pins into an array where you need all the elements to have the same type

Trait Implementations

impl PinSck<SPI1> for PA5<Input<Floating>>[src]

impl Channel<Adc> for PA5<Analog>[src]

type ID = u8

Channel ID type Read more

impl<MODE> OutputPin for PA5<Output<MODE>>[src]

type Error = ()

Error type

impl<MODE> StatefulOutputPin for PA5<Output<MODE>>[src]

impl<MODE> Default for PA5<Output<MODE>>[src]

impl<MODE> InputPin for PA5<Output<MODE>>[src]

type Error = ()

Error type

impl<MODE> InputPin for PA5<Input<MODE>>[src]

type Error = ()

Error type

Auto Trait Implementations

impl<MODE> Unpin for PA5<MODE> where
    MODE: Unpin, 

impl<MODE> Send for PA5<MODE> where
    MODE: Send, 

impl<MODE> Sync for PA5<MODE> where
    MODE: Sync, 

Blanket Implementations

impl<T> From<T> for T[src]

impl<T, U> TryFrom<U> for T where
    U: Into<T>, [src]

type Error = Infallible

The type returned in the event of a conversion error.

impl<T, U> Into<U> for T where
    U: From<T>, [src]

impl<T, U> TryInto<U> for T where
    U: TryFrom<T>, [src]

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.

impl<T> Borrow<T> for T where
    T: ?Sized, [src]

impl<T> BorrowMut<T> for T where
    T: ?Sized, [src]

impl<T> Any for T where
    T: 'static + ?Sized, [src]

impl<T> OutputPin for T where
    T: OutputPin, [src]

type Error = ()

Error type

impl<T> StatefulOutputPin for T where
    T: StatefulOutputPin + OutputPin, [src]

impl<P> ToggleableOutputPin for P where
    P: Default, [src]

type Error = <P as OutputPin>::Error

Error type

fn toggle(&mut self) -> Result<(), <P as ToggleableOutputPin>::Error>[src]

Toggle pin output

impl<T> InputPin for T where
    T: InputPin, [src]

type Error = ()

Error type

impl<T> Same<T> for T

type Output = T

Should always be Self