Expand description
DAC mode control register
Structs
Type Definitions
Field DMADOUBLE1
reader - DAC Channel1 DMA double data mode
Field DMADOUBLE1
writer - DAC Channel1 DMA double data mode
Field DMADOUBLE2
reader - DAC Channel2 DMA double data mode
Field DMADOUBLE2
writer - DAC Channel2 DMA double data mode
Field HFSEL
reader - High frequency interface mode selection
Field HFSEL
writer - High frequency interface mode selection
Field MODE1
reader - DAC Channel 1 mode These bits can be written only when the DAC is disabled and not in the calibration mode (when bit EN1=0 and bit CEN1 =0 in the DAC_CR register). If EN1=1 or CEN1 =1 the write operation is ignored. They can be set and cleared by software to select the DAC Channel 1 mode: DAC Channel 1 in normal Mode DAC Channel 1 in sample & hold mode
Field MODE1
writer - DAC Channel 1 mode These bits can be written only when the DAC is disabled and not in the calibration mode (when bit EN1=0 and bit CEN1 =0 in the DAC_CR register). If EN1=1 or CEN1 =1 the write operation is ignored. They can be set and cleared by software to select the DAC Channel 1 mode: DAC Channel 1 in normal Mode DAC Channel 1 in sample & hold mode
Field MODE2
reader - DAC Channel 2 mode These bits can be written only when the DAC is disabled and not in the calibration mode (when bit EN2=0 and bit CEN2 =0 in the DAC_CR register). If EN2=1 or CEN2 =1 the write operation is ignored. They can be set and cleared by software to select the DAC Channel 2 mode: DAC Channel 2 in normal Mode DAC Channel 2 in sample & hold mode
Field MODE2
writer - DAC Channel 2 mode These bits can be written only when the DAC is disabled and not in the calibration mode (when bit EN2=0 and bit CEN2 =0 in the DAC_CR register). If EN2=1 or CEN2 =1 the write operation is ignored. They can be set and cleared by software to select the DAC Channel 2 mode: DAC Channel 2 in normal Mode DAC Channel 2 in sample & hold mode
Field SINFORMAT1
reader - Enable signed format for DAC channel1
Field SINFORMAT1
writer - Enable signed format for DAC channel1
Field SINFORMAT2
reader - Enable signed format for DAC channel2
Field SINFORMAT2
writer - Enable signed format for DAC channel2