Struct stm32g0xx_hal::gpio::gpiob::PB11 [−][src]
Implementations
impl<MODE> PB11<MODE>[src]
pub fn into_floating_input(self) -> PB11<Input<Floating>>[src]
Configures the pin to operate as a floating input pin
pub fn into_pull_down_input(self) -> PB11<Input<PullDown>>[src]
Configures the pin to operate as a pulled down input pin
pub fn into_pull_up_input(self) -> PB11<Input<PullUp>>[src]
Configures the pin to operate as a pulled up input pin
pub fn into_analog(self) -> PB11<Analog>[src]
Configures the pin to operate as an analog pin
pub fn into_open_drain_output(self) -> PB11<Output<OpenDrain>>[src]
Configures the pin to operate as an open drain output pin
pub fn into_push_pull_output(self) -> PB11<Output<PushPull>>[src]
Configures the pin to operate as an push pull output pin
pub fn listen(self, edge: SignalEdge, exti: &mut EXTI) -> PB11<Input<Floating>>[src]
Configures the pin as external trigger
pub fn set_speed(self, speed: Speed) -> Self[src]
Set pin speed
impl<MODE> PB11<Output<MODE>>[src]
pub fn downgrade(self) -> PB<Output<MODE>>[src]
Erases the pin number from the type
This is useful when you want to collect the pins into an array where you need all the elements to have the same type
impl<MODE> PB11<Input<MODE>>[src]
pub fn downgrade(self) -> PB<Input<MODE>>[src]
Erases the pin number from the type
This is useful when you want to collect the pins into an array where you need all the elements to have the same type
Trait Implementations
impl Channel<Adc> for PB11<Analog>[src]
impl<MODE> Default for PB11<Output<MODE>>[src]
impl<MODE> InputPin for PB11<Output<MODE>>[src]
type Error = Infallible
Error type
fn is_high(&self) -> Result<bool, Self::Error>[src]
fn is_low(&self) -> Result<bool, Self::Error>[src]
impl<MODE> InputPin for PB11<Input<MODE>>[src]
type Error = Infallible
Error type
fn is_high(&self) -> Result<bool, Self::Error>[src]
fn is_low(&self) -> Result<bool, Self::Error>[src]
impl Into<PB11<Input<Floating>>> for PB11<DefaultMode>[src]
impl Into<PB11<Input<PullDown>>> for PB11<DefaultMode>[src]
impl Into<PB11<Input<PullUp>>> for PB11<DefaultMode>[src]
impl Into<PB11<Output<OpenDrain>>> for PB11<DefaultMode>[src]
impl Into<PB11<Output<PushPull>>> for PB11<DefaultMode>[src]
impl<MODE> OutputPin for PB11<Output<MODE>>[src]
type Error = Infallible
Error type
fn set_high(&mut self) -> Result<(), Self::Error>[src]
fn set_low(&mut self) -> Result<(), Self::Error>[src]
impl OutputPin<COMP2> for PB11<Output<PushPull>>[src]
impl OutputPin<COMP2> for PB11<Output<OpenDrain>>[src]
impl PinMosi<SPI2> for PB11<DefaultMode>[src]
impl<MODE> RxPin<USART3> for PB11<MODE>[src]
impl SDAPin<I2C2> for PB11<Output<OpenDrain>>[src]
impl<MODE> StatefulOutputPin for PB11<Output<MODE>>[src]
fn is_set_high(&self) -> Result<bool, Self::Error>[src]
fn is_set_low(&self) -> Result<bool, Self::Error>[src]
impl TimerPin<TIM2> for PB11<DefaultMode>[src]
impl<MODE> TxPin<LPUART> for PB11<MODE>[src]
Auto Trait Implementations
impl<MODE> Send for PB11<MODE> where
MODE: Send,
MODE: Send,
impl<MODE> Sync for PB11<MODE> where
MODE: Sync,
MODE: Sync,
impl<MODE> Unpin for PB11<MODE> where
MODE: Unpin,
MODE: Unpin,
Blanket Implementations
impl<T> Any for T where
T: 'static + ?Sized, [src]
T: 'static + ?Sized,
impl<T> Borrow<T> for T where
T: ?Sized, [src]
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized, [src]
T: ?Sized,
pub fn borrow_mut(&mut self) -> &mut T[src]
impl<T> From<T> for T[src]
impl<T, U> Into<U> for T where
U: From<T>, [src]
U: From<T>,
impl<P> ToggleableOutputPin for P where
P: Default, [src]
P: Default,
type Error = <P as OutputPin>::Error
Error type
pub fn toggle(&mut self) -> Result<(), <P as ToggleableOutputPin>::Error>[src]
Toggle pin output
impl<T, U> TryFrom<U> for T where
U: Into<T>, [src]
U: Into<T>,
type Error = Infallible
The type returned in the event of a conversion error.
pub fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>[src]
impl<T, U> TryInto<U> for T where
U: TryFrom<T>, [src]
U: TryFrom<T>,