Struct stm32g0::stm32g0c1::fdcan1::dbtp::W

pub struct W(_);

Register DBTP writer

Implementations

impl W

pub fn dsjw(&mut self) -> DSJW_W<'_, 0>

Bits 0:3 - Synchronization jump width Must always be smaller than DTSEG2, valid values are 0 to 15. The value used by the hardware is the one programmed, incremented by 1: tSJW = (DSJW + 1) x tq.

pub fn dtseg2(&mut self) -> DTSEG2_W<'_, 4>

Bits 4:7 - Data time segment after sample point Valid values are 0 to 15. The value used by the hardware is the one programmed, incremented by 1, i.e. tBS2 = (DTSEG2 + 1) x tq.

pub fn dtseg1(&mut self) -> DTSEG1_W<'_, 8>

Bits 8:12 - Data time segment before sample point Valid values are 0 to 31. The value used by the hardware is the one programmed, incremented by 1, i.e. tBS1 = (DTSEG1 + 1) x tq.

pub fn dbrp(&mut self) -> DBRP_W<'_, 16>

Bits 16:20 - Data bit rate prescaler The value by which the oscillator frequency is divided to generate the bit time quanta. The bit time is built up from a multiple of this quanta. Valid values for the Baud Rate Prescaler are 0 to 31. The hardware interpreters this value as the value programmed plus 1.

pub fn tdc(&mut self) -> TDC_W<'_, 23>

Bit 23 - Transceiver delay compensation

pub unsafe fn bits(&mut self, bits: u32) -> &mut Self

Writes raw bits to the register.

Methods from Deref<Target = W<DBTP_SPEC>>

pub unsafe fn bits(&mut self, bits: REG::Ux) -> &mut Self

Writes raw bits to the register.

Trait Implementations

impl Deref for W

type Target = W<DBTP_SPEC>

The resulting type after dereferencing.

fn deref(&self) -> &Self::Target

Dereferences the value.

impl DerefMut for W

fn deref_mut(&mut self) -> &mut Self::Target

Mutably dereferences the value.

impl From<W<DBTP_SPEC>> for W

fn from(writer: W<DBTP_SPEC>) -> Self

Converts to this type from the input type.