Struct stm32g0::stm32g0c1::comp::comp1_csr::W

pub struct W(_);

Register COMP1_CSR writer

Implementations

impl W

pub fn en(&mut self) -> EN_W<'_, 0>

Bit 0 - Comparator 1 enable bit This bit is controlled by software (if not locked). It enables the comparator 1:

pub fn inmsel(&mut self) -> INMSEL_W<'_, 4>

Bits 4:7 - Comparator 1 signal selector for inverting input INM This bitfield is controlled by software (if not locked). It selects the signal for the inverting input COMP1_INM of the comparator 1: > 1000: 1/4 VREFINT

pub fn inpsel(&mut self) -> INPSEL_W<'_, 8>

Bits 8:9 - Comparator 1 signal selector for non-inverting input This bitfield is controlled by software (if not locked). It selects the signal for the non-inverting input COMP1_INP of the comparator 1 (also see the WINMODE bit):

pub fn winmode(&mut self) -> WINMODE_W<'_, 11>

Bit 11 - Comparator 1 non-inverting input selector for window mode This bit is controlled by software (if not locked). It selects the signal for COMP1_INP input of the comparator 1:

pub fn winout(&mut self) -> WINOUT_W<'_, 14>

Bit 14 - Comparator 1 output selector This bit is controlled by software (if not locked). It selects the comparator 1 output:

pub fn polarity(&mut self) -> POLARITY_W<'_, 15>

Bit 15 - Comparator 1 polarity selector This bit is controlled by software (if not locked). It selects the comparator 1 output polarity:

pub fn hyst(&mut self) -> HYST_W<'_, 16>

Bits 16:17 - Comparator 1 hysteresis selector This bitfield is controlled by software (if not locked). It selects the hysteresis of the comparator 1:

pub fn pwrmode(&mut self) -> PWRMODE_W<'_, 18>

Bits 18:19 - Comparator 1 power mode selector This bitfield is controlled by software (if not locked). It selects the power consumption and as a consequence the speed of the comparator 1: others: Reserved

pub fn blanksel(&mut self) -> BLANKSEL_W<'_, 20>

Bits 20:24 - Comparator 1 blanking source selector This bitfield is controlled by software (if not locked). It selects the blanking source: xxxx1: TIM1 OC4 xxx1x: TIM1 OC5 xx1xx: TIM2 OC3 x1xxx: TIM3 OC3 1xxxx: TIM15 OC2

pub fn lock(&mut self) -> LOCK_W<'_, 31>

Bit 31 - COMP1_CSR register lock This bit is set by software and cleared by a system reset. It locks the whole content of the comparator 1 control register COMP1_CSR[31:0]:

pub unsafe fn bits(&mut self, bits: u32) -> &mut Self

Writes raw bits to the register.

Methods from Deref<Target = W<COMP1_CSR_SPEC>>

pub unsafe fn bits(&mut self, bits: REG::Ux) -> &mut Self

Writes raw bits to the register.

Trait Implementations

impl Deref for W

type Target = W<COMP1_CSR_SPEC>

The resulting type after dereferencing.

fn deref(&self) -> &Self::Target

Dereferences the value.

impl DerefMut for W

fn deref_mut(&mut self) -> &mut Self::Target

Mutably dereferences the value.

impl From<W<COMP1_CSR_SPEC>> for W

fn from(writer: W<COMP1_CSR_SPEC>) -> Self

Converts to this type from the input type.