Struct stm32g0::stm32g0c1::adc::ier::W

pub struct W(_);

Register IER writer

Implementations

impl W

pub fn adrdyie(&mut self) -> ADRDYIE_W<'_, 0>

Bit 0 - ADC ready interrupt enable This bit is set and cleared by software to enable/disable the ADC Ready interrupt. Note: The software is allowed to write this bit only when ADSTART bit is cleared to 0 (this ensures that no conversion is ongoing).

pub fn eosmpie(&mut self) -> EOSMPIE_W<'_, 1>

Bit 1 - End of sampling flag interrupt enable This bit is set and cleared by software to enable/disable the end of the sampling phase interrupt. Note: The software is allowed to write this bit only when ADSTART bit is cleared to 0 (this ensures that no conversion is ongoing).

pub fn eocie(&mut self) -> EOCIE_W<'_, 2>

Bit 2 - End of conversion interrupt enable This bit is set and cleared by software to enable/disable the end of conversion interrupt. Note: The software is allowed to write this bit only when ADSTART bit is cleared to 0 (this ensures that no conversion is ongoing).

pub fn eosie(&mut self) -> EOSIE_W<'_, 3>

Bit 3 - End of conversion sequence interrupt enable This bit is set and cleared by software to enable/disable the end of sequence of conversions interrupt. Note: The software is allowed to write this bit only when ADSTART bit is cleared to 0 (this ensures that no conversion is ongoing).

pub fn ovrie(&mut self) -> OVRIE_W<'_, 4>

Bit 4 - Overrun interrupt enable This bit is set and cleared by software to enable/disable the overrun interrupt. Note: The software is allowed to write this bit only when ADSTART bit is cleared to 0 (this ensures that no conversion is ongoing).

pub fn awd1ie(&mut self) -> AWD1IE_W<'_, 7>

Bit 7 - Analog watchdog 1 interrupt enable This bit is set and cleared by software to enable/disable the analog watchdog interrupt. Note: The Software is allowed to write this bit only when ADSTART bit is cleared to 0 (this ensures that no conversion is ongoing).

pub fn awd2ie(&mut self) -> AWD2IE_W<'_, 8>

Bit 8 - Analog watchdog 2 interrupt enable This bit is set and cleared by software to enable/disable the analog watchdog interrupt. Note: The Software is allowed to write this bit only when ADSTART bit is cleared to 0 (this ensures that no conversion is ongoing).

pub fn awd3ie(&mut self) -> AWD3IE_W<'_, 9>

Bit 9 - Analog watchdog 3 interrupt enable This bit is set and cleared by software to enable/disable the analog watchdog interrupt. Note: The Software is allowed to write this bit only when ADSTART bit is cleared to 0 (this ensures that no conversion is ongoing).

pub fn eocalie(&mut self) -> EOCALIE_W<'_, 11>

Bit 11 - End of calibration interrupt enable This bit is set and cleared by software to enable/disable the end of calibration interrupt. Note: The software is allowed to write this bit only when ADSTART bit is cleared to 0 (this ensures that no conversion is ongoing).

pub fn ccrdyie(&mut self) -> CCRDYIE_W<'_, 13>

Bit 13 - Channel Configuration Ready Interrupt enable This bit is set and cleared by software to enable/disable the channel configuration ready interrupt. Note: The software is allowed to write this bit only when ADSTART bit is cleared to 0 (this ensures that no conversion is ongoing).

pub unsafe fn bits(&mut self, bits: u32) -> &mut Self

Writes raw bits to the register.

Methods from Deref<Target = W<IER_SPEC>>

pub unsafe fn bits(&mut self, bits: REG::Ux) -> &mut Self

Writes raw bits to the register.

Trait Implementations

impl Deref for W

type Target = W<IER_SPEC>

The resulting type after dereferencing.

fn deref(&self) -> &Self::Target

Dereferences the value.

impl DerefMut for W

fn deref_mut(&mut self) -> &mut Self::Target

Mutably dereferences the value.

impl From<W<IER_SPEC>> for W

fn from(writer: W<IER_SPEC>) -> Self

Converts to this type from the input type.