Struct stm32g0::stm32g0c1::adc::chselr1::W

pub struct W(_);

Register CHSELR1 writer

Implementations

impl W

pub fn sq1(&mut self) -> SQ1_W<'_, 0>

Bits 0:3 - 1st conversion of the sequence These bits are programmed by software with the channel number (0…14) assigned to the 8th conversion of the sequence. 0b1111 indicates end of the sequence. When 0b1111 (end of sequence) is programmed to the lower sequence channels, these bits are ignored. Refer to SQ8[3:0] for a definition of channel selection. Note: The software is allowed to write this bit only when ADSTARTÂ =Â 0 (which ensures that no conversion is ongoing).

pub fn sq2(&mut self) -> SQ2_W<'_, 4>

Bits 4:7 - 2nd conversion of the sequence These bits are programmed by software with the channel number (0…14) assigned to the 8th conversion of the sequence. 0b1111 indicates end of the sequence. When 0b1111 (end of sequence) is programmed to the lower sequence channels, these bits are ignored. Refer to SQ8[3:0] for a definition of channel selection. Note: The software is allowed to write this bit only when ADSTARTÂ =Â 0 (which ensures that no conversion is ongoing).

pub fn sq3(&mut self) -> SQ3_W<'_, 8>

Bits 8:11 - 3rd conversion of the sequence These bits are programmed by software with the channel number (0…14) assigned to the 8th conversion of the sequence. 0b1111 indicates end of the sequence. When 0b1111 (end of sequence) is programmed to the lower sequence channels, these bits are ignored. Refer to SQ8[3:0] for a definition of channel selection. Note: The software is allowed to write this bit only when ADSTARTÂ =Â 0 (which ensures that no conversion is ongoing).

pub fn sq4(&mut self) -> SQ4_W<'_, 12>

Bits 12:15 - 4th conversion of the sequence These bits are programmed by software with the channel number (0…14) assigned to the 8th conversion of the sequence. 0b1111 indicates end of the sequence. When 0b1111 (end of sequence) is programmed to the lower sequence channels, these bits are ignored. Refer to SQ8[3:0] for a definition of channel selection. Note: The software is allowed to write this bit only when ADSTARTÂ =Â 0 (which ensures that no conversion is ongoing).

pub fn sq5(&mut self) -> SQ5_W<'_, 16>

Bits 16:19 - 5th conversion of the sequence These bits are programmed by software with the channel number (0…14) assigned to the 8th conversion of the sequence. 0b1111 indicates end of the sequence. When 0b1111 (end of sequence) is programmed to the lower sequence channels, these bits are ignored. Refer to SQ8[3:0] for a definition of channel selection. Note: The software is allowed to write this bit only when ADSTARTÂ =Â 0 (which ensures that no conversion is ongoing).

pub fn sq6(&mut self) -> SQ6_W<'_, 20>

Bits 20:23 - 6th conversion of the sequence These bits are programmed by software with the channel number (0…14) assigned to the 8th conversion of the sequence. 0b1111 indicates end of the sequence. When 0b1111 (end of sequence) is programmed to the lower sequence channels, these bits are ignored. Refer to SQ8[3:0] for a definition of channel selection. Note: The software is allowed to write this bit only when ADSTARTÂ =Â 0 (which ensures that no conversion is ongoing).

pub fn sq7(&mut self) -> SQ7_W<'_, 24>

Bits 24:27 - 7th conversion of the sequence These bits are programmed by software with the channel number (0…14) assigned to the 8th conversion of the sequence. 0b1111 indicates end of the sequence. When 0b1111 (end of sequence) is programmed to the lower sequence channels, these bits are ignored. Refer to SQ8[3:0] for a definition of channel selection. Note: The software is allowed to write this bit only when ADSTARTÂ =Â 0 (which ensures that no conversion is ongoing).

pub fn sq8(&mut self) -> SQ8_W<'_, 28>

Bits 28:31 - 8th conversion of the sequence These bits are programmed by software with the channel number (0…14) assigned to the 8th conversion of the sequence. 0b1111 indicates the end of the sequence. When 0b1111 (end of sequence) is programmed to the lower sequence channels, these bits are ignored. … Note: The software is allowed to write this bit only when ADSTARTÂ =Â 0 (which ensures that no conversion is ongoing).

pub unsafe fn bits(&mut self, bits: u32) -> &mut Self

Writes raw bits to the register.

Methods from Deref<Target = W<CHSELR1_SPEC>>

pub unsafe fn bits(&mut self, bits: REG::Ux) -> &mut Self

Writes raw bits to the register.

Trait Implementations

impl Deref for W

type Target = W<CHSELR1_SPEC>

The resulting type after dereferencing.

fn deref(&self) -> &Self::Target

Dereferences the value.

impl DerefMut for W

fn deref_mut(&mut self) -> &mut Self::Target

Mutably dereferences the value.

impl From<W<CHSELR1_SPEC>> for W

fn from(writer: W<CHSELR1_SPEC>) -> Self

Converts to this type from the input type.