Struct stm32f7xx_hal::pac::TIM8

source · [−]

pub struct TIM8 { /* private fields */ }

Expand description

Advanced-timers

Implementations

source

impl TIM8

source

pub const PTR: const RegisterBlock = {0x40010400 as const stm32f7::stm32f7x6::tim1::RegisterBlock}

Pointer to the register block

source

pub const fn ptr() -> *const RegisterBlock

Return the pointer to the register block

Methods from Deref<Target = RegisterBlock>

source

pub fn ccmr1_input(&self) -> &Reg<CCMR1_INPUT_SPEC>

0x18 - capture/compare mode register 1 (input mode)

source

pub fn ccmr1_output(&self) -> &Reg<CCMR1_OUTPUT_SPEC>

0x18 - capture/compare mode register 1 (output mode)

source

pub fn ccmr2_input(&self) -> &Reg<CCMR2_INPUT_SPEC>

0x1c - capture/compare mode register 2 (input mode)

source

pub fn ccmr2_output(&self) -> &Reg<CCMR2_OUTPUT_SPEC>

0x1c - capture/compare mode register 2 (output mode)

Trait Implementations

source

impl Debug for TIM8

source

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter. Read more

source

impl Deref for TIM8

type Target = RegisterBlock

The resulting type after dereferencing.

source

fn deref(&self) -> &<TIM8 as Deref>::Target

Dereferences the value.

source

impl Enable for TIM8

source

fn enable(bus: &mut Self::Bus)

Enables peripheral

source

fn disable(bus: &mut Self::Bus)

Disables peripheral

source

fn is_enabled() -> bool

Check if peripheral enabled

source

fn is_disabled() -> bool

Check if peripheral disabled

source

fn low_power_enable(bus: &mut Self::Bus)

Enables peripheral

source

fn low_power_disable(bus: &mut Self::Bus)

Disables peripheral

source

fn is_low_power_enabled() -> bool

Check if peripheral enabled

source

fn is_low_power_disabled() -> bool

Check if peripheral disabled

source

unsafe fn low_power_enable_unchecked()

Safety Read more

source

unsafe fn low_power_disable_unchecked()

Safety Read more

source

impl RccBus for TIM8

type Bus = APB2

Bus type;

source

impl Reset for TIM8

source

fn reset(bus: &mut Self::Bus)

Resets peripheral

source

unsafe fn reset_unchecked()

Safety Read more

source

impl<Otype> CPin<TIM8, $C> for PC6<Alternate<3, Otype>>

source

impl<Otype> CPin<TIM8, $C> for PC7<Alternate<3, Otype>>

source

impl<Otype> CPin<TIM8, $C> for PC8<Alternate<3, Otype>>

source

impl<Otype> CPin<TIM8, $C> for PC9<Alternate<3, Otype>>

source

impl<Otype> CPin<TIM8, $C> for PI5<Alternate<3, Otype>>

source

impl<Otype> CPin<TIM8, $C> for PI6<Alternate<3, Otype>>

source

impl<Otype> CPin<TIM8, $C> for PI7<Alternate<3, Otype>>

source

impl<Otype> CPin<TIM8, $C> for PI2<Alternate<3, Otype>>

source

impl Instance for TIM8

source

impl Send for TIM8

Auto Trait Implementations

impl RefUnwindSafe for TIM8

impl !Sync for TIM8

impl Unpin for TIM8

impl UnwindSafe for TIM8

Blanket Implementations

source

impl<T> Any for T where
T: 'static + ?Sized,

source

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more

source

impl<T> Borrow<T> for T where
T: ?Sized,

const: unstable · source

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more

source

impl<T> BorrowMut<T> for T where
T: ?Sized,

const: unstable · source

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more

source

impl<T> From<T> for T

const: unstable · source

fn from(t: T) -> T

Returns the argument unchanged.

source

impl<T, U> Into for T where
U: From<T>,

const: unstable · source

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source

impl<TIM> PwmExt for TIM where
TIM: Instance + WithPwm,

source

fn pwm<P, PINS, const FREQ: u32>(
 self,
 pins: PINS,
 time: Duration<u32, 1_u32, FREQ>,
 clocks: &Clocks
) -> Pwm<TIM, P, PINS, FREQ> where
 PINS: Pins<TIM, P>,

source

fn pwm_hz<P, PINS>(
 self,
 pins: PINS,
 time: Rate<u32, 1_u32, 1_u32>,
 clocks: &Clocks
) -> PwmHz<TIM, P, PINS> where
 PINS: Pins<TIM, P>,

source

fn pwm_us<P, PINS>(
 self,
 pins: PINS,
 time: TimerDurationU32<1_000_000>,
 clocks: &Clocks
) -> Pwm<Self, P, PINS, 1_000_000> where
 PINS: Pins<Self, P>,

source

impl<TIM> TimerExt for TIM where
TIM: Instance,

source

fn counter<const FREQ: u32>(self, clocks: &Clocks) -> Counter<TIM, FREQ>

Non-blocking Counter with custom fixed precision

source

fn counter_hz(self, clocks: &Clocks) -> CounterHz<TIM>

Non-blocking Counter with dynamic precision which uses Hertz as Duration units

source

fn delay<const FREQ: u32>(self, clocks: &Clocks) -> Delay<TIM, FREQ>

Blocking Delay with custom fixed precision

source

fn counter_ms(self, clocks: &Clocks) -> CounterMs<Self>

Non-blocking Counter with fixed precision of 1 ms (1 kHz sampling) Read more

source

fn counter_us(self, clocks: &Clocks) -> CounterUs<Self>

Non-blocking Counter with fixed precision of 1 μs (1 MHz sampling) Read more

source

fn delay_ms(self, clocks: &Clocks) -> DelayMs<Self>

Blocking Delay with fixed precision of 1 ms (1 kHz sampling) Read more

source

fn delay_us(self, clocks: &Clocks) -> DelayUs<Self>

Blocking Delay with fixed precision of 1 μs (1 MHz sampling) Read more

source

impl<T, U> TryFrom for T where
U: Into<T>,

type Error = Infallible

The type returned in the event of a conversion error.

const: unstable · source

fn try_from(value: U) -> Result<T, <T as TryFrom>::Error>

Performs the conversion.

source

impl<T, U> TryInto for T where
U: TryFrom<T>,

type Error = >::Error

The type returned in the event of a conversion error.

const: unstable · source

fn try_into(self) -> Result<U, >::Error>

Performs the conversion.

Struct stm32f7xx_hal::pac::TIM8

Implementations

impl TIM8

pub const PTR: *const RegisterBlock = {0x40010400 as *const stm32f7::stm32f7x6::tim1::RegisterBlock}

pub const fn ptr() -> *const RegisterBlock

Methods from Deref<Target = RegisterBlock>

pub fn ccmr1_input(&self) -> &Reg<CCMR1_INPUT_SPEC>

pub fn ccmr1_output(&self) -> &Reg<CCMR1_OUTPUT_SPEC>

pub fn ccmr2_input(&self) -> &Reg<CCMR2_INPUT_SPEC>

pub fn ccmr2_output(&self) -> &Reg<CCMR2_OUTPUT_SPEC>

Trait Implementations

impl Debug for TIM8

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

impl Deref for TIM8

type Target = RegisterBlock

fn deref(&self) -> &<TIM8 as Deref>::Target

impl Enable for TIM8

fn enable(bus: &mut Self::Bus)

fn disable(bus: &mut Self::Bus)

fn is_enabled() -> bool

fn is_disabled() -> bool

unsafe fn enable_unchecked()

unsafe fn disable_unchecked()

impl LPEnable for TIM8

fn low_power_enable(bus: &mut Self::Bus)

fn low_power_disable(bus: &mut Self::Bus)

fn is_low_power_enabled() -> bool

fn is_low_power_disabled() -> bool

unsafe fn low_power_enable_unchecked()

unsafe fn low_power_disable_unchecked()

impl RccBus for TIM8

type Bus = APB2

impl Reset for TIM8

fn reset(bus: &mut Self::Bus)

unsafe fn reset_unchecked()

impl<Otype> CPin<TIM8, $C> for PC6<Alternate<3, Otype>>

impl<Otype> CPin<TIM8, $C> for PC7<Alternate<3, Otype>>

impl<Otype> CPin<TIM8, $C> for PC8<Alternate<3, Otype>>

impl<Otype> CPin<TIM8, $C> for PC9<Alternate<3, Otype>>

impl<Otype> CPin<TIM8, $C> for PI5<Alternate<3, Otype>>

impl<Otype> CPin<TIM8, $C> for PI6<Alternate<3, Otype>>

impl<Otype> CPin<TIM8, $C> for PI7<Alternate<3, Otype>>

impl<Otype> CPin<TIM8, $C> for PI2<Alternate<3, Otype>>

impl Instance for TIM8

impl Send for TIM8

Auto Trait Implementations

impl RefUnwindSafe for TIM8

impl !Sync for TIM8

impl Unpin for TIM8

impl UnwindSafe for TIM8

Blanket Implementations

impl<T> Any for T where T: 'static + ?Sized,

fn type_id(&self) -> TypeId

impl<T> Borrow<T> for T where T: ?Sized,

fn borrow(&self) -> &T

impl<T> BorrowMut<T> for T where T: ?Sized,

fn borrow_mut(&mut self) -> &mut T

impl<T> From<T> for T

fn from(t: T) -> T

impl<T, U> Into<U> for T where U: From<T>,

fn into(self) -> U

impl<TIM> PwmExt for TIM where TIM: Instance + WithPwm,

fn pwm<P, PINS, const FREQ: u32>( self, pins: PINS, time: Duration<u32, 1_u32, FREQ>, clocks: &Clocks) -> Pwm<TIM, P, PINS, FREQ> where PINS: Pins<TIM, P>,

fn pwm_hz<P, PINS>( self, pins: PINS, time: Rate<u32, 1_u32, 1_u32>, clocks: &Clocks) -> PwmHz<TIM, P, PINS> where PINS: Pins<TIM, P>,

fn pwm_us<P, PINS>( self, pins: PINS, time: TimerDurationU32<1_000_000>, clocks: &Clocks) -> Pwm<Self, P, PINS, 1_000_000> where PINS: Pins<Self, P>,

impl<TIM> TimerExt for TIM where TIM: Instance,

fn counter<const FREQ: u32>(self, clocks: &Clocks) -> Counter<TIM, FREQ>

fn counter_hz(self, clocks: &Clocks) -> CounterHz<TIM>

fn delay<const FREQ: u32>(self, clocks: &Clocks) -> Delay<TIM, FREQ>

fn counter_ms(self, clocks: &Clocks) -> CounterMs<Self>

fn counter_us(self, clocks: &Clocks) -> CounterUs<Self>

fn delay_ms(self, clocks: &Clocks) -> DelayMs<Self>

fn delay_us(self, clocks: &Clocks) -> DelayUs<Self>

impl<T, U> TryFrom<U> for T where U: Into<T>,

type Error = Infallible

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

impl<T, U> TryInto<U> for T where U: TryFrom<T>,

type Error = <U as TryFrom<T>>::Error

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

pub const PTR: const RegisterBlock = {0x40010400 as const stm32f7::stm32f7x6::tim1::RegisterBlock}

impl<T> Any for T where
T: 'static + ?Sized,

impl<T> Borrow<T> for T where
T: ?Sized,

impl<T> BorrowMut<T> for T where
T: ?Sized,

impl<T, U> Into<U> for T where
U: From<T>,

impl<TIM> PwmExt for TIM where
TIM: Instance + WithPwm,

fn pwm<P, PINS, const FREQ: u32>(
self,
pins: PINS,
time: Duration<u32, 1_u32, FREQ>,
clocks: &Clocks
) -> Pwm<TIM, P, PINS, FREQ> where
PINS: Pins<TIM, P>,

fn pwm_hz<P, PINS>(
self,
pins: PINS,
time: Rate<u32, 1_u32, 1_u32>,
clocks: &Clocks
) -> PwmHz<TIM, P, PINS> where
PINS: Pins<TIM, P>,

fn pwm_us<P, PINS>(
self,
pins: PINS,
time: TimerDurationU32<1_000_000>,
clocks: &Clocks
) -> Pwm<Self, P, PINS, 1_000_000> where
PINS: Pins<Self, P>,

impl<TIM> TimerExt for TIM where
TIM: Instance,

impl<T, U> TryFrom<U> for T where
U: Into<T>,

impl<T, U> TryInto<U> for T where
U: TryFrom<T>,