Struct stm32f4xx_hal::pac::sdio::sta::R

pub struct R(/* private fields */);

Register STA reader

Implementations

impl R

pub fn ceataend(&self) -> BitReaderRaw<CEATAEND_A>

Bit 23 - CE-ATA command completion signal received for CMD61

pub fn sdioit(&self) -> BitReaderRaw<SDIOIT_A>

Bit 22 - SDIO interrupt received

pub fn rxdavl(&self) -> BitReaderRaw<RXDAVL_A>

Bit 21 - Data available in receive FIFO

pub fn txdavl(&self) -> BitReaderRaw<TXDAVL_A>

Bit 20 - Data available in transmit FIFO

pub fn rxfifoe(&self) -> BitReaderRaw<RXFIFOE_A>

Bit 19 - Receive FIFO empty

pub fn txfifoe(&self) -> BitReaderRaw<TXFIFOE_A>

Bit 18 - Transmit FIFO empty

pub fn rxfifof(&self) -> BitReaderRaw<RXFIFOF_A>

Bit 17 - Receive FIFO full

pub fn txfifof(&self) -> BitReaderRaw<TXFIFOF_A>

Bit 16 - Transmit FIFO full

pub fn rxfifohf(&self) -> BitReaderRaw<RXFIFOHF_A>

Bit 15 - Receive FIFO half full: there are at least 8 words in the FIFO

pub fn txfifohe(&self) -> BitReaderRaw<TXFIFOHE_A>

Bit 14 - Transmit FIFO half empty: at least 8 words can be written into the FIFO

pub fn rxact(&self) -> BitReaderRaw<RXACT_A>

Bit 13 - Data receive in progress

pub fn txact(&self) -> BitReaderRaw<TXACT_A>

Bit 12 - Data transmit in progress

pub fn cmdact(&self) -> BitReaderRaw<CMDACT_A>

Bit 11 - Command transfer in progress

pub fn dbckend(&self) -> BitReaderRaw<DBCKEND_A>

Bit 10 - Data block sent/received (CRC check passed)

pub fn stbiterr(&self) -> BitReaderRaw<STBITERR_A>

Bit 9 - Start bit not detected on all data signals in wide bus mode

pub fn dataend(&self) -> BitReaderRaw<DATAEND_A>

Bit 8 - Data end (data counter, SDIDCOUNT, is zero)

pub fn cmdsent(&self) -> BitReaderRaw<CMDSENT_A>

Bit 7 - Command sent (no response required)

pub fn cmdrend(&self) -> BitReaderRaw<CMDREND_A>

Bit 6 - Command response received (CRC check passed)

pub fn rxoverr(&self) -> BitReaderRaw<RXOVERR_A>

Bit 5 - Received FIFO overrun error

pub fn txunderr(&self) -> BitReaderRaw<TXUNDERR_A>

Bit 4 - Transmit FIFO underrun error

pub fn dtimeout(&self) -> BitReaderRaw<DTIMEOUT_A>

Bit 3 - Data timeout

pub fn ctimeout(&self) -> BitReaderRaw<CTIMEOUT_A>

Bit 2 - Command response timeout

pub fn dcrcfail(&self) -> BitReaderRaw<DCRCFAIL_A>

Bit 1 - Data block sent/received (CRC check failed)

pub fn ccrcfail(&self) -> BitReaderRaw<CCRCFAIL_A>

Bit 0 - Command response received (CRC check failed)

Methods from Deref<Target = R<STA_SPEC>>

pub fn bits(&self) -> <REG as RegisterSpec>::Ux

Reads raw bits from register.

Trait Implementations

impl Deref for R

type Target = R<STA_SPEC>

The resulting type after dereferencing.

fn deref(&self) -> &<R as Deref>::Target

Dereferences the value.

impl From<R<STA_SPEC>> for R

fn from(reader: R<STA_SPEC>) -> R

Converts to this type from the input type.