Struct stm32f411xx::rtc::cr::R
[−]
[src]
pub struct R { /* fields omitted */ }
Value read from the register
Methods
impl R
[src]
fn bits(&self) -> u32
[src]
Value of the register as raw bits
fn coe(&self) -> COER
[src]
Bit 23 - Calibration output enable
fn osel(&self) -> OSELR
[src]
Bits 21:22 - Output selection
fn pol(&self) -> POLR
[src]
Bit 20 - Output polarity
fn cosel(&self) -> COSELR
[src]
Bit 19 - Calibration Output selection
fn bkp(&self) -> BKPR
[src]
Bit 18 - Backup
fn sub1h(&self) -> SUB1HR
[src]
Bit 17 - Subtract 1 hour (winter time change)
fn add1h(&self) -> ADD1HR
[src]
Bit 16 - Add 1 hour (summer time change)
fn tsie(&self) -> TSIER
[src]
Bit 15 - Time-stamp interrupt enable
fn wutie(&self) -> WUTIER
[src]
Bit 14 - Wakeup timer interrupt enable
fn alrbie(&self) -> ALRBIER
[src]
Bit 13 - Alarm B interrupt enable
fn alraie(&self) -> ALRAIER
[src]
Bit 12 - Alarm A interrupt enable
fn tse(&self) -> TSER
[src]
Bit 11 - Time stamp enable
fn wute(&self) -> WUTER
[src]
Bit 10 - Wakeup timer enable
fn alrbe(&self) -> ALRBER
[src]
Bit 9 - Alarm B enable
fn alrae(&self) -> ALRAER
[src]
Bit 8 - Alarm A enable
fn dce(&self) -> DCER
[src]
Bit 7 - Coarse digital calibration enable
fn fmt(&self) -> FMTR
[src]
Bit 6 - Hour format
fn bypshad(&self) -> BYPSHADR
[src]
Bit 5 - Bypass the shadow registers
fn refckon(&self) -> REFCKONR
[src]
Bit 4 - Reference clock detection enable (50 or 60 Hz)
fn tsedge(&self) -> TSEDGER
[src]
Bit 3 - Time-stamp event active edge
fn wcksel(&self) -> WCKSELR
[src]
Bits 0:2 - Wakeup clock selection